frabugno
04-12-2012, 10:34
Ti posto il risultato del comado dmesg l'altro non va
ubuntu-studio@ubuntu-studio:~$ sudo dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5.0-17-lowlatency (buildd@batsu) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #18-Ubuntu SMP PREEMPT Tue Oct 9 20:04:43 UTC 2012 (Ubuntu 3.5.0-17.18-lowlatency 3.5.5)
[ 0.000000] Command line: noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/ubuntustudio.seed boot=casper persistent initrd=/casper/initrd.lz quiet spalsh -- debian-installer/language=it keyboard-configuration/layoutcode?=it
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffaffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003ffb0000-0x000000003ffbffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000003ffc0000-0x000000003ffeffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000003fff0000-0x000000003fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff7c0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.3 present.
[ 0.000000] DMI: TBD K8 Combo-Z/K8 Combo-Z, BIOS P1.50 12/15/2004
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP bridge at 00:00:00
[ 0.000000] Aperture from AGP @ f8000000 old size 32 MB
[ 0.000000] Aperture size 4096 MB (APSIZE 0) is not right, using settings from NB
[ 0.000000] Aperture from AGP @ f8000000 size 32 MB (APSIZE 0)
[ 0.000000] e820: last_pfn = 0x3ffb0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x3ffaffff]
[ 0.000000] [mem 0x00000000-0x3fdfffff] page 2M
[ 0.000000] [mem 0x3fe00000-0x3ffaffff] page 4k
[ 0.000000] kernel direct mapping tables up to 0x3ffaffff @ [mem 0x1fffd000-0x1fffffff]
[ 0.000000] RAMDISK: [mem 0x3ee90000-0x3ffaffff]
[ 0.000000] ACPI: RSDP 00000000000fa290 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 000000003ffb0000 00030 (v01 A M I OEMRSDT 12000415 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000003ffb0200 00081 (v01 A M I OEMFACP 12000415 MSFT 00000097)
[ 0.000000] ACPI: DSDT 000000003ffb03f0 03D9D (v01 K8CBZ K8CBZ150 00000150 INTL 02002026)
[ 0.000000] ACPI: FACS 000000003ffc0000 00040
[ 0.000000] ACPI: APIC 000000003ffb0390 00054 (v01 A M I OEMAPIC 12000415 MSFT 00000097)
[ 0.000000] ACPI: OEMB 000000003ffc0040 00040 (v01 A M I AMI_OEM 12000415 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000003ffaffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x3ffaffff]
[ 0.000000] NODE_DATA [mem 0x3ee8c000-0x3ee8ffff]
[ 0.000000] [ffffea0000000000-ffffea0000ffffff] PMD -> [ffff88003d600000-ffff88003e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x3ffaffff]
[ 0.000000] On node 0 totalpages: 261951
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 4031 pages used for memmap
[ 0.000000] DMA32 zone: 253937 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
[ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
[ 0.000000] e820: [mem 0x40000000-0xff7bffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88003ec00000 s83904 r8192 d22592 u2097152
[ 0.000000] pcpu-alloc: s83904 r8192 d22592 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 257850
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/ubuntustudio.seed boot=casper persistent initrd=/casper/initrd.lz quiet spalsh -- debian-installer/language=it keyboard-configuration/layoutcode?=it
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] AGP bridge at 00:00:00
[ 0.000000] Aperture from AGP @ f8000000 old size 32 MB
[ 0.000000] Aperture size 4096 MB (APSIZE 0) is not right, using settings from NB
[ 0.000000] Aperture from AGP @ f8000000 size 32 MB (APSIZE 0)
[ 0.000000] Node 0: aperture @ f8000000 size 64 MB
[ 0.000000] Memory: 997976k/1048256k available (6761k kernel code, 452k absent, 49828k reserved, 6411k data, 876k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:16640 nr_irqs:256 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 4194304 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1799.938 MHz processor.
[ 0.001005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.87 BogoMIPS (lpj=1799938)
[ 0.001011] pid_max: default: 32768 minimum: 301
[ 0.001056] Security Framework initialized
[ 0.001097] AppArmor: AppArmor initialized
[ 0.001099] Yama: becoming mindful.
[ 0.001342] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.003342] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.004218] Mount-cache hash table entries: 256
[ 0.004665] Initializing cgroup subsys cpuacct
[ 0.004670] Initializing cgroup subsys memory
[ 0.004694] Initializing cgroup subsys devices
[ 0.004697] Initializing cgroup subsys freezer
[ 0.004699] Initializing cgroup subsys blkio
[ 0.004702] Initializing cgroup subsys perf_event
[ 0.004752] tseg: 0000000000
[ 0.004779] mce: CPU supports 5 MCE banks
[ 0.004839] SMP alternatives: switching to UP code
[ 0.014351] Freeing SMP alternatives: 24k freed
[ 0.014373] ACPI: Core revision 20120320
[ 0.016616] ftrace: allocating 25103 entries in 99 pages
[ 0.028502] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.038521] CPU0: AMD Athlon(tm) 64 Processor 2800+ stepping 00
[ 0.038997] Performance Events: AMD PMU driver.
[ 0.038997] ... version: 0
[ 0.038997] ... bit width: 48
[ 0.038997] ... generic registers: 4
[ 0.038997] ... value mask: 0000ffffffffffff
[ 0.038997] ... max period: 00007fffffffffff
[ 0.038997] ... fixed-purpose events: 0
[ 0.038997] ... event mask: 000000000000000f
[ 0.044359] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.044425] Brought up 1 CPUs
[ 0.044428] Total of 1 processors activated (3599.87 BogoMIPS).
[ 0.045349] devtmpfs: initialized
[ 0.047598] EVM: security.selinux
[ 0.047600] EVM: security.SMACK64
[ 0.047602] EVM: security.capability
[ 0.047722] PM: Registering ACPI NVS region [mem 0x3ffc0000-0x3ffeffff] (196608 bytes)
[ 0.048873] dummy:
[ 0.048901] RTC time: 10:11:31, date: 12/04/12
[ 0.048967] NET: Registered protocol family 16
[ 0.049218] node 0 link 0: io port [1000, ffffff]
[ 0.049223] TOM: 0000000040000000 aka 1024M
[ 0.049227] node 0 link 0: mmio [a0000, bffff]
[ 0.049231] node 0 link 0: mmio [40000000, ffffffff]
[ 0.049234] bus: [00, ff] on node 0 link 0
[ 0.049238] bus: 00 [io 0x0000-0xffff]
[ 0.049240] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.049242] bus: 00 [mem 0x40000000-0xfcffffffff]
[ 0.049359] ACPI: bus type pci registered
[ 0.049431] PCI: Using configuration type 1 for base access
[ 0.050736] bio: create slab <bio-0> at 0
[ 0.050898] ACPI: Added _OSI(Module Device)
[ 0.050900] ACPI: Added _OSI(Processor Device)
[ 0.050902] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.050904] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.051578] ACPI: EC: Look up EC in DSDT
[ 0.052703] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.053087] ACPI: Actual Package length (266) is larger than NumElements field (2), truncated
[ 0.053091]
[ 0.055304] ACPI: Interpreter enabled
[ 0.055309] ACPI: (supports S0 S1 S4 S5)
[ 0.055333] ACPI: Using IOAPIC for interrupt routing
[ 0.060583] ACPI: No dock devices found.
[ 0.060590] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.060670] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.060786] pci_root PNP0A03:00: >host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.060789] pci_root PNP0A03:00: >host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.060793] pci_root PNP0A03:00: >host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.060796] pci_root PNP0A03:00: >host bridge window [mem 0x40000000-0xffffffff] (ignored)
[ 0.060798] PCI: root bus 00: hardware-probed resources
[ 0.060847] PCI host bridge to bus 0000:00
[ 0.060851] pci_bus 0000:00: >root bus resource [io 0x0000-0xffff]
[ 0.060854] pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
[ 0.060857] pci_bus 0000:00: >root bus resource [mem 0x40000000-0xfcffffffff]
[ 0.060876] pci 0000:00:00.0: >[10b9:1689] type 00 class 0x060000
[ 0.060888] pci 0000:00:00.0: >reg 10: [mem 0xf8000000-0xfbffffff pref]
[ 0.060961] pci 0000:00:01.0: >[10b9:5246] type 01 class 0x060400
[ 0.061006] pci 0000:00:02.0: >[10b9:5249] type 01 class 0x060401
[ 0.061042] pci 0000:00:03.0: >[10b9:1563] type 00 class 0x060100
[ 0.061098] pci 0000:00:03.1: >[10b9:7101] type 00 class 0x068000
[ 0.061146] pci 0000:00:03.1: >quirk: [io 0x0800-0x083f] claimed by ali7101 ACPI
[ 0.061171] pci 0000:00:04.0: >[10b9:5455] type 00 class 0x040100
[ 0.061184] pci 0000:00:04.0: >reg 10: [io 0xe800-0xe8ff]
[ 0.061192] pci 0000:00:04.0: >reg 14: [mem 0xfebff000-0xfebfffff]
[ 0.061237] pci 0000:00:04.0: >supports D1 D2
[ 0.061240] pci 0000:00:04.0: >PME# supported from D2 D3hot D3cold
[ 0.061265] pci 0000:00:0d.0: >[10b9:5263] type 00 class 0x020000
[ 0.061274] pci 0000:00:0d.0: >reg 10: [io 0xe400-0xe4ff]
[ 0.061280] pci 0000:00:0d.0: >reg 14: [mem 0xfebfec00-0xfebfecff]
[ 0.061310] pci 0000:00:0d.0: >PME# supported from D3hot D3cold
[ 0.061325] pci 0000:00:0e.0: >[10b9:5229] type 00 class 0x0101fa
[ 0.061333] pci 0000:00:0e.0: >reg 10: [io 0x01f0-0x01ff]
[ 0.061339] pci 0000:00:0e.0: >reg 14: [io 0x03f4-0x03f7]
[ 0.061345] pci 0000:00:0e.0: >reg 18: [io 0x0170-0x017f]
[ 0.061351] pci 0000:00:0e.0: >reg 1c: [io 0x0374-0x0377]
[ 0.061358] pci 0000:00:0e.0: >reg 20: [io 0xff00-0xff0f]
[ 0.061386] pci 0000:00:0f.0: >[10b9:5237] type 00 class 0x0c0310
[ 0.061394] pci 0000:00:0f.0: >reg 10: [mem 0xfebfd000-0xfebfdfff]
[ 0.061431] pci 0000:00:0f.1: >[10b9:5237] type 00 class 0x0c0310
[ 0.061439] pci 0000:00:0f.1: >reg 10: [mem 0xfebfc000-0xfebfcfff]
[ 0.061474] pci 0000:00:0f.2: >[10b9:5237] type 00 class 0x0c0310
[ 0.061482] pci 0000:00:0f.2: >reg 10: [mem 0xfebfb000-0xfebfbfff]
[ 0.061519] pci 0000:00:0f.3: >[10b9:5239] type 00 class 0x0c0320
[ 0.061529] pci 0000:00:0f.3: >reg 10: [mem 0xfebfe800-0xfebfe8ff]
[ 0.061566] pci 0000:00:0f.3: >PME# supported from D0 D3hot D3cold
[ 0.061591] pci 0000:00:18.0: >[1022:1100] type 00 class 0x060000
[ 0.061616] pci 0000:00:18.1: >[1022:1101] type 00 class 0x060000
[ 0.061637] pci 0000:00:18.2: >[1022:1102] type 00 class 0x060000
[ 0.061659] pci 0000:00:18.3: >[1022:1103] type 00 class 0x060000
[ 0.061702] pci 0000:01:00.0: >[10de:0185] type 00 class 0x030000
[ 0.061714] pci 0000:01:00.0: >reg 10: [mem 0xfd000000-0xfdffffff]
[ 0.061722] pci 0000:01:00.0: >reg 14: [mem 0xe8000000-0xefffffff pref]
[ 0.061745] pci 0000:01:00.0: >reg 30: [mem 0xfeae0000-0xfeafffff pref]
[ 0.061792] pci 0000:00:01.0: >PCI bridge to [bus 01-01]
[ 0.061798] pci 0000:00:01.0: > bridge window [mem 0xfca00000-0xfeafffff]
[ 0.061803] pci 0000:00:01.0: > bridge window [mem 0xe4900000-0xf48fffff pref]
[ 0.061841] pci 0000:00:02.0: >PCI bridge to [bus 02-02] (subtractive decode)
[ 0.061848] pci 0000:00:02.0: > bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.061851] pci 0000:00:02.0: > bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.061854] pci 0000:00:02.0: > bridge window [mem 0x40000000-0xfcffffffff] (subtractive decode)
[ 0.061866] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.061931] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.061958] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HTT_._PRT]
[ 0.062095] pci0000:00: >Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.067327] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.067430] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.067529] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.067632] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15), disabled.
[ 0.067730] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.067828] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.067925] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.068032] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
[ 0.068131] ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.068295] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.068297] vgaarb: loaded
[ 0.068299] vgaarb: bridge control possible 0000:01:00.0
[ 0.068599] SCSI subsystem initialized
[ 0.068724] libata version 3.00 loaded.
[ 0.068753] ACPI: bus type usb registered
[ 0.068789] usbcore: registered new interface driver usbfs
[ 0.068807] usbcore: registered new interface driver hub
[ 0.068848] usbcore: registered new device driver usb
[ 0.068972] PCI: Using ACPI for IRQ routing
[ 0.068977] PCI: pci_cache_line_size set to 64 bytes
[ 0.068991] pci 0000:00:00.0: >address space collision: [mem 0xf8000000-0xfbffffff pref] conflicts with GART [mem 0xf8000000-0xfbffffff]
[ 0.069049] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.069052] e820: reserve RAM buffer [mem 0x3ffb0000-0x3fffffff]
[ 0.069221] NetLabel: Initializing
[ 0.069223] NetLabel: domain hash size = 128
[ 0.069225] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.069243] NetLabel: unlabeled traffic allowed by default
[ 0.084215] AppArmor: AppArmor Filesystem Enabled
[ 0.084286] pnp: PnP ACPI init
[ 0.084315] ACPI: bus type pnp registered
[ 0.084484] pnp 00:00: >[bus 00-ff]
[ 0.084488] pnp 00:00: >[io 0x0cf8-0x0cff]
[ 0.084491] pnp 00:00: >[io 0x0000-0x0cf7 window]
[ 0.084494] pnp 00:00: >[io 0x0d00-0xffff window]
[ 0.084497] pnp 00:00: >[mem 0x000a0000-0x000bffff window]
[ 0.084500] pnp 00:00: >[mem 0x00000000 window]
[ 0.084503] pnp 00:00: >[mem 0x40000000-0xffffffff window]
[ 0.084588] pnp 00:00: >Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.084618] pnp 00:01: >[dma 4]
[ 0.084621] pnp 00:01: >[io 0x0000-0x000f]
[ 0.084624] pnp 00:01: >[io 0x0081-0x0083]
[ 0.084626] pnp 00:01: >[io 0x0087]
[ 0.084629] pnp 00:01: >[io 0x0089-0x008b]
[ 0.084631] pnp 00:01: >[io 0x008f]
[ 0.084634] pnp 00:01: >[io 0x00c0-0x00df]
[ 0.084659] pnp 00:01: >Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.084676] pnp 00:02: >[io 0x0070-0x0071]
[ 0.084696] pnp 00:02: >[irq 8]
[ 0.084727] pnp 00:02: >Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.084739] pnp 00:03: >[io 0x0061]
[ 0.084777] pnp 00:03: >Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.084788] pnp 00:04: >[io 0x00f0-0x00ff]
[ 0.084795] pnp 00:04: >[irq 13]
[ 0.084825] pnp 00:04: >Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.085279] pnp 00:05: >[io 0x03f0-0x03f5]
[ 0.085282] pnp 00:05: >[io 0x03f7]
[ 0.085288] pnp 00:05: >[irq 6]
[ 0.085296] pnp 00:05: >[dma 2]
[ 0.085367] pnp 00:05: >Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.085740] pnp 00:06: >[io 0x0378-0x037f]
[ 0.085743] pnp 00:06: >[io 0x0778-0x077f]
[ 0.085749] pnp 00:06: >[irq 7]
[ 0.085751] pnp 00:06: >[dma 3]
[ 0.085901] pnp 00:06: >Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.086127] pnp 00:07: >[io 0x0200-0x0207]
[ 0.086168] pnp 00:07: >Plug and Play ACPI device, IDs PNPb02f (active)
[ 0.086297] pnp 00:08: >[io 0x0010-0x001f]
[ 0.086300] pnp 00:08: >[io 0x0022-0x003f]
[ 0.086303] pnp 00:08: >[io 0x0044-0x005f]
[ 0.086305] pnp 00:08: >[io 0x0062-0x0063]
[ 0.086308] pnp 00:08: >[io 0x0065-0x006f]
[ 0.086311] pnp 00:08: >[io 0x0072-0x007f]
[ 0.086313] pnp 00:08: >[io 0x0080]
[ 0.086316] pnp 00:08: >[io 0x0084-0x0086]
[ 0.086324] pnp 00:08: >[io 0x0088]
[ 0.086327] pnp 00:08: >[io 0x008c-0x008e]
[ 0.086329] pnp 00:08: >[io 0x0090-0x009f]
[ 0.086332] pnp 00:08: >[io 0x00a2-0x00bf]
[ 0.086335] pnp 00:08: >[io 0x00e0-0x00ef]
[ 0.086337] pnp 00:08: >[io 0x0400-0x040f]
[ 0.086340] pnp 00:08: >[io 0x0480-0x048f]
[ 0.086342] pnp 00:08: >[io 0x04d0-0x04d1]
[ 0.086345] pnp 00:08: >[io 0x0800-0x087f]
[ 0.086348] pnp 00:08: >[mem 0xfff80000-0xffffffff]
[ 0.086436] system 00:08: >[io 0x0400-0x040f] has been reserved
[ 0.086440] system 00:08: >[io 0x0480-0x048f] has been reserved
[ 0.086443] system 00:08: >[io 0x04d0-0x04d1] has been reserved
[ 0.086447] system 00:08: >[io 0x0800-0x087f] could not be reserved
[ 0.086453] system 00:08: >[mem 0xfff80000-0xffffffff] has been reserved
[ 0.086458] system 00:08: >Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.086529] pnp 00:09: >[mem 0xffbc0000-0xffbfffff]
[ 0.086532] pnp 00:09: >[mem 0xfec00000-0xfec00fff]
[ 0.086535] pnp 00:09: >[mem 0xfee00000-0xfee00fff]
[ 0.086583] system 00:09: >[mem 0xffbc0000-0xffbfffff] has been reserved
[ 0.086587] system 00:09: >[mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.086590] system 00:09: >[mem 0xfee00000-0xfee00fff] has been reserved
[ 0.086594] system 00:09: >Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.086627] pnp 00:0a: >[io 0x0060]
[ 0.086630] pnp 00:0a: >[io 0x0064]
[ 0.086636] pnp 00:0a: >[irq 1]
[ 0.086675] pnp 00:0a: >Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.086948] pnp 00:0b: >[io 0x03f8-0x03ff]
[ 0.086954] pnp 00:0b: >[irq 4]
[ 0.086957] pnp 00:0b: >[dma 0 disabled]
[ 0.087046] pnp 00:0b: >Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.087113] pnp 00:0c: >[io 0x0000-0xffffffffffffffff disabled]
[ 0.087116] pnp 00:0c: >[io 0x0680-0x06ff]
[ 0.087119] pnp 00:0c: >[io 0x0295-0x0296]
[ 0.087172] system 00:0c: >[io 0x0680-0x06ff] has been reserved
[ 0.087175] system 00:0c: >[io 0x0295-0x0296] has been reserved
[ 0.087179] system 00:0c: >Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.087320] pnp 00:0d: >[mem 0x00000000-0x0009ffff]
[ 0.087323] pnp 00:0d: >[mem 0x000c0000-0x000dffff]
[ 0.087326] pnp 00:0d: >[mem 0x000e0000-0x000fffff]
[ 0.087328] pnp 00:0d: >[mem 0x00100000-0x3fffffff]
[ 0.087331] pnp 00:0d: >[mem 0x00000000-0xffffffffffffffff disabled]
[ 0.087337] pnp 00:0d: >disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x03ffffff pref]
[ 0.087342] pnp 00:0d: >disabling [mem 0x000c0000-0x000dffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x03ffffff pref]
[ 0.087345] pnp 00:0d: >disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x03ffffff pref]
[ 0.087349] pnp 00:0d: >disabling [mem 0x00100000-0x3fffffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x03ffffff pref]
[ 0.087396] system 00:0d: >Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.087554] pnp: PnP ACPI: found 14 devices
[ 0.087556] ACPI: ACPI bus type pnp unregistered
[ 0.094327] Switching to clocksource acpi_pm
[ 0.094396] pci 0000:00:01.0: >PCI bridge to [bus 01-01]
[ 0.094406] pci 0000:00:01.0: > bridge window [mem 0xfca00000-0xfeafffff]
[ 0.094411] pci 0000:00:01.0: > bridge window [mem 0xe4900000-0xf48fffff pref]
[ 0.094417] pci 0000:00:02.0: >PCI bridge to [bus 02-02]
[ 0.094436] pci 0000:00:01.0: >setting latency timer to 64
[ 0.094443] pci 0000:00:02.0: >setting latency timer to 64
[ 0.094448] pci_bus 0000:00: >resource 4 [io 0x0000-0xffff]
[ 0.094451] pci_bus 0000:00: >resource 5 [mem 0x000a0000-0x000bffff]
[ 0.094454] pci_bus 0000:00: >resource 6 [mem 0x40000000-0xfcffffffff]
[ 0.094458] pci_bus 0000:01: >resource 1 [mem 0xfca00000-0xfeafffff]
[ 0.094461] pci_bus 0000:01: >resource 2 [mem 0xe4900000-0xf48fffff pref]
[ 0.094464] pci_bus 0000:02: >resource 4 [io 0x0000-0xffff]
[ 0.094467] pci_bus 0000:02: >resource 5 [mem 0x000a0000-0x000bffff]
[ 0.094470] pci_bus 0000:02: >resource 6 [mem 0x40000000-0xfcffffffff]
[ 0.094553] NET: Registered protocol family 2
[ 0.094673] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.095190] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.098633] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.100312] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.100319] TCP: reno registered
[ 0.100339] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.100370] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.100551] NET: Registered protocol family 1
[ 0.100608] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 0.286062] pci 0000:01:00.0: >Boot video device
[ 0.286341] Trying to unpack rootfs image as initramfs...
[ 0.288029] agpgart-amd64 0000:00:00.0: >AGP bridge [10b9/1689]
[ 0.288037] agpgart-amd64 0000:00:00.0: >aperture size 4096 MB is not right, using settings from NB
[ 0.288043] agpgart-amd64 0000:00:00.0: >setting up ULi AGP
[ 0.291874] agpgart-amd64 0000:00:00.0: >AGP aperture is 64M @ 0xf8000000
[ 0.292380] audit: initializing netlink socket (disabled)
[ 0.292402] type=2000 audit(1354615891.291:1): initialized
[ 0.338062] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.344192] VFS: Disk quotas dquot_6.5.2
[ 0.344271] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.347101] fuse init (API version 7.19)
[ 0.347229] msgmni has been set to 1949
[ 0.361085] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.363018] io scheduler noop registered
[ 0.363021] io scheduler deadline registered (default)
[ 0.363061] io scheduler cfq registered
[ 0.363250] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.363278] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.363460] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.363469] ACPI: Power Button [PWRB]
[ 0.363531] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.363535] ACPI: Power Button [PWRF]
[ 0.368761] GHES: HEST is not enabled!
[ 0.368878] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.410012] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.454016] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.454341] Linux agpgart interface v0.103
[ 0.458216] brd: module loaded
[ 0.460217] loop: module loaded
[ 0.462031] Fixed MDIO Bus: probed
[ 0.462089] tun: Universal TUN/TAP device driver, 1.6
[ 0.462091] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.462155] PPP generic driver version 2.4.2
[ 0.462217] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.462282] ehci_hcd 0000:00:0f.3: >EHCI Host Controller
[ 0.462297] ehci_hcd 0000:00:0f.3: >new USB bus registered, assigned bus number 1
[ 0.462339] ehci_hcd 0000:00:0f.3: >debug port 1
[ 0.486057] ehci_hcd 0000:00:0f.3: >irq 23, io mem 0xfebfe800
[ 0.492012] ehci_hcd 0000:00:0f.3: >USB 2.0 started, EHCI 1.00
[ 0.492061] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
[ 0.492065] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.492068] usb usb1: >Product: EHCI Host Controller
[ 0.492071] usb usb1: >Manufacturer: Linux 3.5.0-17-lowlatency ehci_hcd
[ 0.492073] usb usb1: >SerialNumber: 0000:00:0f.3
[ 0.492271] hub 1-0:1.0: >USB hub found
[ 0.492279] hub 1-0:1.0: >8 ports detected
[ 0.492435] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.492522] ohci_hcd 0000:00:0f.0: >OHCI Host Controller
[ 0.492532] ohci_hcd 0000:00:0f.0: >new USB bus registered, assigned bus number 2
[ 0.495046] ohci_hcd 0000:00:0f.0: >irq 20, io mem 0xfebfd000
[ 0.548066] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0001
[ 0.548073] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.548076] usb usb2: >Product: OHCI Host Controller
[ 0.548079] usb usb2: >Manufacturer: Linux 3.5.0-17-lowlatency ohci_hcd
[ 0.548082] usb usb2: >SerialNumber: 0000:00:0f.0
[ 0.548329] hub 2-0:1.0: >USB hub found
[ 0.548337] hub 2-0:1.0: >3 ports detected
[ 0.548486] ohci_hcd 0000:00:0f.1: >OHCI Host Controller
[ 0.548496] ohci_hcd 0000:00:0f.1: >new USB bus registered, assigned bus number 3
[ 0.551046] ohci_hcd 0000:00:0f.1: >irq 21, io mem 0xfebfc000
[ 0.604058] usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001
[ 0.604065] usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.604069] usb usb3: >Product: OHCI Host Controller
[ 0.604072] usb usb3: >Manufacturer: Linux 3.5.0-17-lowlatency ohci_hcd
[ 0.604074] usb usb3: >SerialNumber: 0000:00:0f.1
[ 0.604287] hub 3-0:1.0: >USB hub found
[ 0.604295] hub 3-0:1.0: >3 ports detected
[ 0.604457] ohci_hcd 0000:00:0f.2: >OHCI Host Controller
[ 0.604471] ohci_hcd 0000:00:0f.2: >new USB bus registered, assigned bus number 4
[ 0.607047] ohci_hcd 0000:00:0f.2: >irq 22, io mem 0xfebfb000
[ 0.660053] usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001
[ 0.660061] usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.660064] usb usb4: >Product: OHCI Host Controller
[ 0.660067] usb usb4: >Manufacturer: Linux 3.5.0-17-lowlatency ohci_hcd
[ 0.660070] usb usb4: >SerialNumber: 0000:00:0f.2
[ 0.660284] hub 4-0:1.0: >USB hub found
[ 0.660292] hub 4-0:1.0: >3 ports detected
[ 0.660404] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.660505] usbcore: registered new interface driver libusual
[ 0.660556] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.660558] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.663100] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.663198] mousedev: PS/2 mouse device common for all mice
[ 0.663324] rtc_cmos 00:02: >RTC can wake from S4
[ 0.663441] rtc_cmos 00:02: >rtc core: registered rtc_cmos as rtc0
[ 0.665037] rtc0: alarms up to one month, 114 bytes nvram
[ 0.665160] device-mapper: uevent: version 1.0.3
[ 0.665258] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 0.665271] cpuidle: using governor ladder
[ 0.665273] cpuidle: using governor menu
[ 0.665275] EFI Variables Facility v0.08 2004-May-17
[ 0.666769] ashmem: initialized
[ 0.666934] TCP: cubic registered
[ 0.667095] NET: Registered protocol family 10
[ 0.667433] NET: Registered protocol family 17
[ 0.667450] Key type dns_resolver registered
[ 0.667668] PM: Hibernation image not present or could not be loaded.
[ 0.667701] registered taskstats version 1
[ 0.683969] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.849035] usb 1-8: >new high-speed USB device number 3 using ehci_hcd
[ 0.963382] usb 1-8: >New USB device found, idVendor=0409, idProduct=005a
[ 0.963390] usb 1-8: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.963680] hub 1-8:1.0: >USB hub found
[ 0.963744] hub 1-8:1.0: >4 ports detected
[ 1.225033] usb 3-2: >new low-speed USB device number 2 using ohci_hcd
[ 1.296022] Refined TSC clocksource calibration: 1799.941 MHz.
[ 1.296033] Switching to clocksource tsc
[ 1.414084] usb 3-2: >New USB device found, idVendor=1241, idProduct=1166
[ 1.414093] usb 3-2: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.491169] usb 1-8.1: >new high-speed USB device number 4 using ehci_hcd
[ 1.580148] usb 1-8.1: >New USB device found, idVendor=0930, idProduct=6545
[ 1.580156] usb 1-8.1: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.580160] usb 1-8.1: >Product: DataTraveler G3
[ 1.580162] usb 1-8.1: >Manufacturer: Kingston
[ 1.580165] usb 1-8.1: >SerialNumber: 000AEB91BC8CEBC0768E01E3
[ 1.656174] usb 1-8.3: >new high-speed USB device number 5 using ehci_hcd
[ 1.741905] usb 1-8.3: >New USB device found, idVendor=04e8, idProduct=328d
[ 1.741914] usb 1-8.3: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.741917] usb 1-8.3: >Product: ML-2850 Series
[ 1.741920] usb 1-8.3: >Manufacturer: Samsung Electronics Co., Ltd.
[ 1.741922] usb 1-8.3: >SerialNumber: 4P21BKEQ410939P
[ 1.815179] usb 1-8.4: >new high-speed USB device number 6 using ehci_hcd
[ 1.902407] usb 1-8.4: >New USB device found, idVendor=058f, idProduct=6362
[ 1.902414] usb 1-8.4: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.902418] usb 1-8.4: >Product: Mass Storage Device
[ 1.902421] usb 1-8.4: >Manufacturer: Generic
[ 1.902423] usb 1-8.4: >SerialNumber: 058F312D81B
[ 6.143523] Freeing initrd memory: 17536k freed
[ 6.177139] Initializing USB Mass Storage driver...
[ 6.178056] scsi0 : usb-storage 1-8.1:1.0
[ 6.179523] scsi1 : usb-storage 1-8.4:1.0
[ 6.179643] usbcore: registered new interface driver usb-storage
[ 6.179645] USB Mass Storage support registered.
[ 6.179846] Key type trusted registered
[ 6.183632] Key type encrypted registered
[ 6.187576] Magic number: 8:13:173
[ 6.187746] rtc_cmos 00:02: >setting system clock to 2012-12-04 10:11:38 UTC (1354615898)
[ 6.187813] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 2800+ (1 cpu cores) (version 2.20.00)
[ 6.187889] powernow-k8: fid 0xa (1800 MHz), vid 0x2
[ 6.187891] powernow-k8: fid 0x2 (1000 MHz), vid 0xa
[ 6.187956] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 6.187958] EDD information not available.
[ 6.190186] Freeing unused kernel memory: 876k freed
[ 6.191205] Write protecting the kernel read-only data: 12288k
[ 6.197685] Freeing unused kernel memory: 1420k freed
[ 6.205085] Freeing unused kernel memory: 1144k freed
[ 6.248980] udevd[100]: starting version 175
[ 6.525724] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
[ 6.551505] wmi: Mapper loaded
[ 6.557912] Floppy drive(s): fd0 is 1.44M
[ 6.566277] uli526x 0000:00:0d.0: >eth0: ULi M5263 at pci0000:00:0d.0, 00:0b:6a:bc:46:df, irq 17
[ 6.574086] scsi2 : pata_ali
[ 6.576064] scsi3 : pata_ali
[ 6.577951] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 6.577954] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 6.585850] FDC 0 is a post-1991 82077
[ 6.605902] [drm] Initialized drm 1.1.0 20060810
[ 6.732344] ata1.01: ATAPI: HL-DT-STDVD-RAM GSA-H58N, 1.03, max UDMA/66
[ 6.732354] ata1.01: WARNING: ATAPI DMA disabled for reliability issues. It can be enabled
[ 6.732357] ata1.01: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.
[ 6.738220] ata1.01: configured for UDMA/66
[ 6.740869] scsi 2:0:1:0: >CD-ROM HL-DT-ST DVD-RAM GSA-H58N 1.03 PQ: 0 ANSI: 5
[ 6.743609] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.743613] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 6.743774] sr 2:0:1:0: >Attached scsi CD-ROM sr0
[ 6.743863] sr 2:0:1:0: >Attached scsi generic sg0 type 5
[ 6.920631] ata2.00: ATA-6: IC35L060AVV207-0, V22OA63A, max UDMA/100
[ 6.920639] ata2.00: 120103200 sectors, multi 16: LBA48
[ 6.920646] ata2.01: ATAPI: HL-DT-ST DVDRAM GSA-4163B, A102, max UDMA/33
[ 6.920649] ata2.01: WARNING: ATAPI DMA disabled for reliability issues. It can be enabled
[ 6.920651] ata2.01: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.
[ 6.929504] ata2.00: configured for UDMA/100
[ 6.951135] ata2.01: configured for UDMA/33
[ 6.956791] scsi 3:0:0:0: >Direct-Access ATA IC35L060AVV207-0 V22O PQ: 0 ANSI: 5
[ 6.957063] sd 3:0:0:0: >[sda] 120103200 512-byte logical blocks: (61.4 GB/57.2 GiB)
[ 6.957122] sd 3:0:0:0: >[sda] Write Protect is off
[ 6.957126] sd 3:0:0:0: >[sda] Mode Sense: 00 3a 00 00
[ 6.957150] sd 3:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.957286] sd 3:0:0:0: >Attached scsi generic sg1 type 0
[ 6.974018] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 6.974026] ata2.00: BMDMA stat 0x64
[ 6.974031] ata2.00: failed command: READ DMA
[ 6.974039] ata2.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 6.974039] res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
[ 6.974042] ata2.00: status: { DRDY ERR }
[ 6.974045] ata2.00: error: { ICRC ABRT }
[ 6.974074] ata2: soft resetting link
[ 7.159491] ata2.00: configured for UDMA/100
[ 7.181175] ata2.01: configured for UDMA/33
[ 7.181483] scsi 1:0:0:0: >Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 7.182096] scsi 1:0:0:1: >Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 7.182218] scsi 0:0:0:0: >Direct-Access Kingston DataTraveler G3 PMAP PQ: 0 ANSI: 0 CCS
[ 7.183576] sd 3:0:0:0: >[sda]
[ 7.183584] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 7.183587] sd 3:0:0:0: >[sda]
[ 7.183590] Sense Key : Aborted Command [current] [descriptor]
[ 7.183594] Descriptor sense data with sense descriptors (in hex):
[ 7.183596] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 7.183606] 00 00 00 07
[ 7.183610] sd 3:0:0:0: >[sda]
[ 7.183619] Add. Sense: Scsi parity error
[ 7.183622] sd 3:0:0:0: >[sda] CDB:
[ 7.183623] Read(10): 28 00 00 00 00 00 00 00 08 00
[ 7.183632] end_request: I/O error, dev sda, sector 0
[ 7.183636] Buffer I/O error on device sda, logical block 0
[ 7.183658] ata2: EH complete
[ 7.184643] sd 0:0:0:0: >[sdb] 30481152 512-byte logical blocks: (15.6 GB/14.5 GiB)
[ 7.185219] sd 0:0:0:0: >[sdb] Write Protect is off
[ 7.185226] sd 0:0:0:0: >[sdb] Mode Sense: 23 00 00 00
[ 7.185269] sd 0:0:0:0: >Attached scsi generic sg2 type 0
[ 7.185718] sd 0:0:0:0: >[sdb] No Caching mode page present
[ 7.185723] sd 0:0:0:0: >[sdb] Assuming drive cache: write through
[ 7.187502] scsi 1:0:0:2: >Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 7.188095] scsi 1:0:0:3: >Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 7.188833] sd 0:0:0:0: >[sdb] No Caching mode page present
[ 7.188837] sd 0:0:0:0: >[sdb] Assuming drive cache: write through
[ 7.190029] sdb: sdb1
[ 7.190601] ata2.00: limiting speed to UDMA/66:PIO4
[ 7.190607] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 7.190610] ata2.00: BMDMA stat 0x64
[ 7.190614] ata2.00: failed command: READ DMA
[ 7.190622] ata2.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 7.190622] res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
[ 7.190626] ata2.00: status: { DRDY ERR }
[ 7.190628] ata2.00: error: { ICRC ABRT }
[ 7.190657] ata2: soft resetting link
[ 7.190766] sd 1:0:0:0: >Attached scsi generic sg3 type 0
[ 7.191352] sd 1:0:0:1: >Attached scsi generic sg4 type 0
[ 7.192035] sd 1:0:0:2: >Attached scsi generic sg5 type 0
[ 7.192462] sd 0:0:0:0: >[sdb] No Caching mode page present
[ 7.192466] sd 0:0:0:0: >[sdb] Assuming drive cache: write through
[ 7.192470] sd 0:0:0:0: >[sdb] Attached SCSI removable disk
[ 7.192753] sd 1:0:0:3: >Attached scsi generic sg6 type 0
[ 7.193969] sd 1:0:0:0: >[sdc] Attached SCSI removable disk
[ 7.197607] sd 1:0:0:1: >[sdd] Attached SCSI removable disk
[ 7.199852] sd 1:0:0:2: >[sde] Attached SCSI removable disk
[ 7.200602] sd 1:0:0:3: >[sdf] Attached SCSI removable disk
[ 7.375550] ata2.00: configured for UDMA/66
[ 7.397137] ata2.01: configured for UDMA/33
[ 7.399526] sd 3:0:0:0: >[sda]
[ 7.399529] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 7.399532] sd 3:0:0:0: >[sda]
[ 7.399534] Sense Key : Aborted Command [current] [descriptor]
[ 7.399539] Descriptor sense data with sense descriptors (in hex):
[ 7.399540] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 7.399550] 00 00 00 07
[ 7.399555] sd 3:0:0:0: >[sda]
[ 7.399562] Add. Sense: Scsi parity error
[ 7.399565] sd 3:0:0:0: >[sda] CDB:
[ 7.399567] Read(10): 28 00 00 00 00 00 00 00 08 00
[ 7.399576] end_request: I/O error, dev sda, sector 0
[ 7.399580] Buffer I/O error on device sda, logical block 0
[ 7.399607] ata2: EH complete
[ 7.407124] ata2.00: limiting speed to UDMA/33:PIO4
[ 7.407129] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 7.407131] ata2.00: BMDMA stat 0x64
[ 7.407136] ata2.00: failed command: READ DMA
[ 7.407144] ata2.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 7.407144] res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
[ 7.407147] ata2.00: status: { DRDY ERR }
[ 7.407149] ata2.00: error: { ICRC ABRT }
[ 7.407177] ata2: soft resetting link
[ 7.592505] ata2.00: configured for UDMA/33
[ 7.614136] ata2.01: configured for UDMA/33
[ 7.616499] sd 3:0:0:0: >[sda]
[ 7.616501] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 7.616503] sd 3:0:0:0: >[sda]
[ 7.616505] Sense Key : Aborted Command [current] [descriptor]
[ 7.616507] Descriptor sense data with sense descriptors (in hex):
[ 7.616509] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 7.616518] 00 00 00 07
[ 7.616523] sd 3:0:0:0: >[sda]
[ 7.616526] Add. Sense: Scsi parity error
[ 7.616529] sd 3:0:0:0: >[sda] CDB:
[ 7.616530] Read(10): 28 00 00 00 00 00 00 00 08 00
[ 7.616537] end_request: I/O error, dev sda, sector 0
[ 7.616539] Buffer I/O error on device sda, logical block 0
[ 7.616558] ata2: EH complete
[ 7.618880] ldm_validate_partition_table(): Disk read failed.
[ 7.618889] Dev sda: unable to read RDB block 0
[ 7.619119] sda: unable to read partition table
[ 7.619305] sda: detected capacity change from 0 to 61492838400
[ 7.619429] sd 3:0:0:0: >[sda] Attached SCSI disk
[ 7.623306] sda: detected capacity change from 0 to 61492838400
[ 7.623325] scsi 3:0:1:0: >CD-ROM HL-DT-ST DVDRAM GSA-4163B A102 PQ: 0 ANSI: 5
[ 7.629572] sr1: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 7.629732] sr 3:0:1:0: >Attached scsi CD-ROM sr1
[ 7.629866] sr 3:0:1:0: >Attached scsi generic sg7 type 5
[ 7.647481] usbcore: registered new interface driver usbhid
[ 7.647489] usbhid: USB HID core driver
[ 7.666068] input: HID 1241:1166 as /devices/pci0000:00/0000:00:0f.1/usb3/3-2/3-2:1.0/input/input3
[ 7.666540] hid-generic 0003:1241:1166.0001: >input,hidraw0: USB HID v1.10 Mouse [HID 1241:1166] on usb-0000:00:0f.1-2/input0
[ 7.682576] [drm] nouveau 0000:01:00.0: Detected an NV10 generation card (0x018500c1)
[ 7.683074] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
[ 7.739025] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 7.739037] [drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN
[ 7.739267] [drm] nouveau 0000:01:00.0: BMP BIOS found
[ 7.739270] [drm] nouveau 0000:01:00.0: BMP version 5.41
[ 7.739274] [drm] nouveau 0000:01:00.0: Bios version 04.18.20.45
[ 7.739662] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[ 7.739665] [drm] nouveau 0000:01:00.0: DCB version 2.2
[ 7.739670] [drm] nouveau 0000:01:00.0: DCB outp 00: 01000300 00009c40
[ 7.739673] [drm] nouveau 0000:01:00.0: DCB outp 01: 02010310 00009c40
[ 7.739675] [drm] nouveau 0000:01:00.0: DCB outp 02: 01010312 00000000
[ 7.739678] [drm] nouveau 0000:01:00.0: DCB outp 03: 02020321 00000733
[ 7.739852] [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode
[ 7.739858] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xED34
[ 7.741906] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xF22C
[ 7.741933] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xEEB6
[ 7.757008] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xF59F
[ 7.757013] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF5BC
[ 7.757018] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xF098
[ 7.766496] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xF1C7
[ 7.766979] [TTM] Zone kernel: Available graphics memory: 509488 kiB
[ 7.766981] [TTM] Initializing pool allocator
[ 7.766989] [TTM] Initializing DMA pool allocator
[ 7.767026] [drm] nouveau 0000:01:00.0: Detected 128MiB VRAM (DDR1)
[ 7.767776] agpgart-amd64 0000:00:00.0: >AGP 3.0 bridge
[ 7.767799] agpgart: kworker/0:4 tried to set rate=x12. Setting to AGP3 x8 mode.
[ 7.767809] agpgart-amd64 0000:00:00.0: >putting AGP V3 device into 8x mode
[ 7.767841] nouveau 0000:01:00.0: >putting AGP V3 device into 8x mode
[ 7.767844] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
[ 7.768160] [drm] nouveau 0000:01:00.0: Saving VGA fonts
[ 7.827789] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 7.827797] [drm] No driver support for vblank timestamp query.
[ 7.833717] [drm] nouveau 0000:01:00.0: 0 available performance level(s)
[ 7.833722] [drm] nouveau 0000:01:00.0: c: core 249MHz memory 300MHz
[ 7.835675] [drm] nouveau 0000:01:00.0: MM: using M2MF for buffer copies
[ 7.835685] [drm] nouveau 0000:01:00.0: 0xE25E: Parsing digital output script table
[ 7.910023] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[ 7.910034] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
[ 7.910037] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2)
[ 7.910041] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
[ 7.991783] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo ffff88003f80b400
[ 7.991934] fbcon: nouveaufb (fb0) is primary device
[ 8.654078] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[ 8.654084] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A
[ 8.657287] Console: switching to colour frame buffer device 160x64
[ 8.660149] fb0: nouveaufb frame buffer device
[ 8.660152] drm: registered panic notifier
[ 8.660161] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
[ 9.014097] xor: automatically using best checksumming function:
[ 9.024037] generic_sse: 5356.000 MB/sec
[ 9.025697] device-mapper: dm-raid45: initialized v0.2594b
[ 9.650242] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 10.634032] end_request: I/O error, dev fd0, sector 0
[ 11.367035] end_request: I/O error, dev fd0, sector 0
[ 36.927309] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 37.051624] udevd[2474]: starting version 175
[ 37.574088] Bluetooth: Core ver 2.16
[ 37.585135] NET: Registered protocol family 31
[ 37.585146] Bluetooth: HCI device and connection manager initialized
[ 37.585151] Bluetooth: HCI socket layer initialized
[ 37.585153] Bluetooth: L2CAP socket layer initialized
[ 37.585168] Bluetooth: SCO socket layer initialized
[ 37.634308] lp: driver loaded but no devices found
[ 37.658880] Bluetooth: RFCOMM TTY layer initialized
[ 37.658894] Bluetooth: RFCOMM socket layer initialized
[ 37.658897] Bluetooth: RFCOMM ver 1.11
[ 37.682249] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 37.682257] Bluetooth: BNEP filters: protocol multicast
[ 37.692454] ppdev: user-space parallel port driver
[ 37.710064] parport_pc 00:06: >reported by Plug and Play ACPI
[ 37.710183] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 37.806383] lp0: using parport0 (interrupt-driven).
[ 37.852495] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 37.879415] ali1563_smbus 0000:00:03.0: >Found ALi1563 SMBus at 0x0400
[ 37.885985] ali1535_smbus 0000:00:03.1: >enabling device (0000 -> 0001)
[ 37.885998] ali1535_smbus 0000:00:03.1: >ALI1535_smb region uninitialized - upgrade BIOS?
[ 37.886031] ali1535_smbus 0000:00:03.1: >ALI1535 not detected, module not inserted.
[ 37.889125] ali15x3_smbus 0000:00:03.1: >ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
[ 37.889485] ali15x3_smbus 0000:00:03.1: >ALI15X3 not detected, module not inserted.
[ 38.133870] gameport gameport0: >NS558 PnP Gameport is pnp00:07/gameport0, io 0x200, speed 877kHz
[ 38.270547] MCE: In-kernel MCE decoding enabled.
[ 38.303380] EDAC MC: Ver: 2.1.0
[ 38.364135] AMD64 EDAC driver v3.4.0
[ 38.364216] EDAC amd64: DRAM ECC disabled.
[ 38.364221] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 38.364221] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 38.364221] (Note that use of the override may cause unknown side effects.)
[ 38.505053] device-mapper: multipath: version 1.4.0 loaded
[ 38.749263] microcode: AMD CPU family 0xf not supported
[ 39.114366] usblp 1-8.3:1.0: >usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04E8 pid 0x328D
[ 39.116595] usbcore: registered new interface driver usblp
[ 39.684330] init: failsafe main process (2825) killed by TERM signal
[ 40.650455] usblp0: removed
[ 40.675195] usblp 1-8.3:1.0: >usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04E8 pid 0x328D
[ 40.975024] AC'97 1 does not respond - RESET
[ 40.975492] AC'97 1 access is not valid [0xffffffff], removing mixer.
[ 40.975880] Unable to initialize codec #1
[ 41.049093] intel8x0_measure_ac97_clock: measured 50405 usecs (2432 samples)
[ 41.049101] intel8x0: clocking to 48000
[ 41.167541] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 41.177440] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 44.176363] uli526x 0000:00:0d.0: >eth0: NIC Link is Up 100 Mbps Full duplex
[ 44.176735] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 46.885200] init: plymouth-stop pre-start process (4193) terminated with status 1
[ 104.254147] Marking TSC unstable due to cpufreq changes
[ 104.254244] Switching to clocksource acpi_pm
[ 187.602634] firefox[4863]: segfault at 8 ip 00007ff95f98f7a6 sp 00007fff76aa3bf8 error 4 in nouveau_vieux_dri.so[7ff95f989000+2b000]
[ 188.038808] firefox[4867]: segfault at 8 ip 00007feda188f7a6 sp 00007fff49bc99e8 error 4 in nouveau_vieux_dri.so[7feda1889000+2b000]
ubuntu-studio@ubuntu-studio:~$
vBulletin® v3.6.4, Copyright ©2000-2025, Jelsoft Enterprises Ltd.