Alb1
12-09-2012, 20:31
Salve,
Ho installato da poco VectorLinux 7.0 (bella distribuzione, derivata Slackware) e ho un problema con hp-toolbox che mi permetterebbe di gestire al meglio la mia stampante hp photosmart c4180 all- in- one.
Se lancio hp-check, sembra andare tutto bene perchè ottengo:
vector:/~
alberto:$ hp-check
HP Linux Imaging and Printing System (ver. 3.11.10)
Dependency/Version Check Utility ver. 14.3
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Saving output in log file: hp-check.log
Initializing. Please wait...
---------------
| SYSTEM INFO |
---------------
Basic system information:
Linux vector.Linux.net 3.0.8 #1 SMP Sun Oct 30 17:20:23 MDT 2011 i686 Intel(R) Pentium(R) D CPU 2.80GHz GenuineIntel GNU/Linux
Distribution:
unknown 0.0
Checking Python version...
OK, version 2.7.2 installed
Checking PyQt 4.x version...
OK, version 4.8.3 installed.
Checking for CUPS...
Status: scheduler is running
Version: 1.4.6
error_log is set to level: warn
Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.2
------------------------------------
| COMPILE AND RUNTIME DEPENDENCIES |
------------------------------------
note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).
Checking for dependency: CUPS - Common Unix Printing System...
OK, found.
Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.
Checking for dependency: CUPS image - CUPS image development files...
OK, found.
Checking for dependency: DBus - Message bus system...
OK, found.
Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.
Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.
Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.
Checking for dependency: libjpeg - JPEG library...
OK, found.
Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.
Checking for dependency: libpthread - POSIX threads library...
OK, found.
Checking for dependency: libtool - Library building support services...
OK, found.
Checking for dependency: libusb - USB library...
OK, found.
Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.
Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.
Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.
Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.
Checking for dependency: Python devel - Python development files...
OK, found.
Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.
Checking for dependency: Python XML libraries...
OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.
Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
Checking for dependency: SANE - Scanning library...
OK, found.
Checking for dependency: SANE - Scanning library development files...
OK, found.
Checking for dependency: scanimage - Shell scanning program...
OK, found.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.
----------------------
| HPLIP INSTALLATION |
----------------------
Currently installed HPLIP version...
HPLIP 3.11.10 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.11.10
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/cups/model/HP
ppdbase=/usr/share/cups/model
doc=/usr/doc/hplip-3.11.10
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=no
gui-build=no
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=no
shadow-build=yes
hpijs-install=yes
foomatic-drv-install=no
foomatic-ppd-install=yes
foomatic-rip-hplip-install=yes
hpcups-install=no
cups-drv-install=no
cups-ppd-install=no
internal-tag=3.11.10
restricted-build=no
ui-toolkit=no
qt3=no
qt4=no
policy-kit=no
hpijs-only-build=no
lite-build=no
udev-acl-rules=no
hpcups-only-build=no
hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables.
[plugin]
installed=0
eula=0
Current contents of '~/.hplip/hplip.conf' file:
[last_used]
device_uri = hp:/usb/Photosmart_C4100_series?serial=MY6B2G13J904J7
[installation]
date_time = 09/11/2012 22:24:09
version = 3.11.10
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
Device URI Model
-------------------------------- --------------------------
hp:/usb/Photosmart_C4100_series? HP Photosmart C4100 series
serial=MY6B2G13J904J7
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
Photosmart_C4100
----------------
Type: Printer
Device URI: hp:/usb/Photosmart_C4100_series?serial=MY6B2G13J904J7
PPD: /etc/cups/ppd/Photosmart_C4100.ppd
PPD Description: HP Photosmart c4100 Series hpijs, 3.11.10
Printer status: printer Photosmart_C4100 is idle. enabled since Tue 11 Sep 2012 06:57:30 PM CEST
Communication status: Good
----------------------
| SANE CONFIGURATION |
----------------------
'hpaio' in '/etc/sane.d/dll.conf'...
OK, found. SANE backend 'hpaio' is properly set up.
Checking output of 'scanimage -L'...
device `hpaio:/usb/Photosmart_C4100_series?serial=MY6B2G13J904J7' is a Hewlett-Packard Photosmart_C4100_series all-in-one
---------------------
| PYTHON EXTENSIONS |
---------------------
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
Checking 'scanext' SANE scanning extension...
OK, found.
-----------------
| USB I/O SETUP |
-----------------
Checking for permissions of USB attached printers...
HP Device 0x5711 at 001:003:
Device URI: hp:/usb/Photosmart_C4100_series?serial=MY6B2G13J904J7
Device node: /dev/bus/usb/001/003
Mode: 0664
getfacl: Removing leading '/' from absolute path names
# file: dev/bus/usb/001/003
# owner: root
# group: plugdev
user::rw-
group::rw-
other::r--
---------------
| USER GROUPS |
---------------
alberto disk lp floppy audio video cdrom games slocate plugdev power netdev scanner users
-----------
| SUMMARY |
-----------
error: 1 error or warning.
Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html
Done.
vector:/~
alberto:$
(Nota: L'unico errore rilevato si riferisce alla mancanza di reportlab che ho poi installato e ora non rileva più errori).
Però, se lancio hp-toolbox, ottengo:
vector:/~
alberto:$ hp-toolbox
HP Linux Imaging and Printing System (ver. 3.11.10)
HP Device Manager ver. 15.0
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Traceback (most recent call last):
File "/usr/share/hplip/toolbox.py", line 246, in <module>
from ui4.devmgr5 import DevMgr5
ImportError: No module named ui4.devmgr5
vector:/~
alberto:$
Avete un suggerimento?
Non so con esattezza cosa fare (non sono molto esperto in queste cose).
Cordiali Saluti
Ho installato da poco VectorLinux 7.0 (bella distribuzione, derivata Slackware) e ho un problema con hp-toolbox che mi permetterebbe di gestire al meglio la mia stampante hp photosmart c4180 all- in- one.
Se lancio hp-check, sembra andare tutto bene perchè ottengo:
vector:/~
alberto:$ hp-check
HP Linux Imaging and Printing System (ver. 3.11.10)
Dependency/Version Check Utility ver. 14.3
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Saving output in log file: hp-check.log
Initializing. Please wait...
---------------
| SYSTEM INFO |
---------------
Basic system information:
Linux vector.Linux.net 3.0.8 #1 SMP Sun Oct 30 17:20:23 MDT 2011 i686 Intel(R) Pentium(R) D CPU 2.80GHz GenuineIntel GNU/Linux
Distribution:
unknown 0.0
Checking Python version...
OK, version 2.7.2 installed
Checking PyQt 4.x version...
OK, version 4.8.3 installed.
Checking for CUPS...
Status: scheduler is running
Version: 1.4.6
error_log is set to level: warn
Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.2
------------------------------------
| COMPILE AND RUNTIME DEPENDENCIES |
------------------------------------
note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).
Checking for dependency: CUPS - Common Unix Printing System...
OK, found.
Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.
Checking for dependency: CUPS image - CUPS image development files...
OK, found.
Checking for dependency: DBus - Message bus system...
OK, found.
Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.
Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.
Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.
Checking for dependency: libjpeg - JPEG library...
OK, found.
Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.
Checking for dependency: libpthread - POSIX threads library...
OK, found.
Checking for dependency: libtool - Library building support services...
OK, found.
Checking for dependency: libusb - USB library...
OK, found.
Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.
Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.
Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.
Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.
Checking for dependency: Python devel - Python development files...
OK, found.
Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.
Checking for dependency: Python XML libraries...
OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.
Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
Checking for dependency: SANE - Scanning library...
OK, found.
Checking for dependency: SANE - Scanning library development files...
OK, found.
Checking for dependency: scanimage - Shell scanning program...
OK, found.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.
----------------------
| HPLIP INSTALLATION |
----------------------
Currently installed HPLIP version...
HPLIP 3.11.10 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.11.10
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/cups/model/HP
ppdbase=/usr/share/cups/model
doc=/usr/doc/hplip-3.11.10
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=no
gui-build=no
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=no
shadow-build=yes
hpijs-install=yes
foomatic-drv-install=no
foomatic-ppd-install=yes
foomatic-rip-hplip-install=yes
hpcups-install=no
cups-drv-install=no
cups-ppd-install=no
internal-tag=3.11.10
restricted-build=no
ui-toolkit=no
qt3=no
qt4=no
policy-kit=no
hpijs-only-build=no
lite-build=no
udev-acl-rules=no
hpcups-only-build=no
hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables.
[plugin]
installed=0
eula=0
Current contents of '~/.hplip/hplip.conf' file:
[last_used]
device_uri = hp:/usb/Photosmart_C4100_series?serial=MY6B2G13J904J7
[installation]
date_time = 09/11/2012 22:24:09
version = 3.11.10
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
Device URI Model
-------------------------------- --------------------------
hp:/usb/Photosmart_C4100_series? HP Photosmart C4100 series
serial=MY6B2G13J904J7
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
Photosmart_C4100
----------------
Type: Printer
Device URI: hp:/usb/Photosmart_C4100_series?serial=MY6B2G13J904J7
PPD: /etc/cups/ppd/Photosmart_C4100.ppd
PPD Description: HP Photosmart c4100 Series hpijs, 3.11.10
Printer status: printer Photosmart_C4100 is idle. enabled since Tue 11 Sep 2012 06:57:30 PM CEST
Communication status: Good
----------------------
| SANE CONFIGURATION |
----------------------
'hpaio' in '/etc/sane.d/dll.conf'...
OK, found. SANE backend 'hpaio' is properly set up.
Checking output of 'scanimage -L'...
device `hpaio:/usb/Photosmart_C4100_series?serial=MY6B2G13J904J7' is a Hewlett-Packard Photosmart_C4100_series all-in-one
---------------------
| PYTHON EXTENSIONS |
---------------------
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
Checking 'scanext' SANE scanning extension...
OK, found.
-----------------
| USB I/O SETUP |
-----------------
Checking for permissions of USB attached printers...
HP Device 0x5711 at 001:003:
Device URI: hp:/usb/Photosmart_C4100_series?serial=MY6B2G13J904J7
Device node: /dev/bus/usb/001/003
Mode: 0664
getfacl: Removing leading '/' from absolute path names
# file: dev/bus/usb/001/003
# owner: root
# group: plugdev
user::rw-
group::rw-
other::r--
---------------
| USER GROUPS |
---------------
alberto disk lp floppy audio video cdrom games slocate plugdev power netdev scanner users
-----------
| SUMMARY |
-----------
error: 1 error or warning.
Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html
Done.
vector:/~
alberto:$
(Nota: L'unico errore rilevato si riferisce alla mancanza di reportlab che ho poi installato e ora non rileva più errori).
Però, se lancio hp-toolbox, ottengo:
vector:/~
alberto:$ hp-toolbox
HP Linux Imaging and Printing System (ver. 3.11.10)
HP Device Manager ver. 15.0
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Traceback (most recent call last):
File "/usr/share/hplip/toolbox.py", line 246, in <module>
from ui4.devmgr5 import DevMgr5
ImportError: No module named ui4.devmgr5
vector:/~
alberto:$
Avete un suggerimento?
Non so con esattezza cosa fare (non sono molto esperto in queste cose).
Cordiali Saluti