zelekhut
08-05-2012, 21:38
Ciao a tutti, un mio amico ha un problema: il suo pc si riavvia in continuazione, ha scaricato il programma per vedere gli errori della schermata blu... gli dà questi errori
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: dxgmms1.sys
BAD_POOL_HEADER
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x00000019 (0x0000000000000020, 0xfffffa800ad94180, 0xfffffa800ad94ee0,
0x000000000cd6a240)
*** dxgmms1.sys - Address 0xfffff88006f9b8dc base at 0xfffff88006f7c000 DateStamp
0x4a5bc578
secondo errore
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: atikmdag.sys
BAD_POOL_CALLER
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x000000c2 (0x0000000000000007, 0x0000000000001097, 0x0000000000000000,
0xfffffa8008f03790)
*** atikmdag.sys - Address 0xfffff880076be0ad base at 0xfffff880072c3000 DateStamp
0x4f3b1dc8
terzo errore
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: ntoskrnl.exe
SYSTEM_SERVICE_EXCEPTION
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x0000003b (0x00000000c0000005, 0xfffff800030c5ac1, 0xfffff8800c9cf000,
0x0000000000000000)
*** ntoskrnl.exe - Address 0xfffff800030baf00 base at 0xfffff80003049000 DateStamp
0x4a5bc600
quarto errore
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: fltmgr.sys
NTFS_FILE_SYSTEM
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x00000024 (0x00000000001904fb, 0xfffff88003153688, 0xfffff88003152ee0,
0xfffff88000fb111e)
*** fltmgr.sys - Address 0xfffff88000fb111e base at 0xfffff88000f87000 DateStamp
0x4a5bc11f
ultimo errore
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: dxgmms1.sys
SYSTEM_SERVICE_EXCEPTION
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x0000003b (0x00000000c0000005, 0xfffff88006f81953, 0xfffff8800a84aad0,
0x0000000000000000)
*** dxgmms1.sys - Address 0xfffff88006f81953 base at 0xfffff88006f4a000 DateStamp
0x4a5bc578
usa windows 7 ultimate
cosa può fare?
Grazie
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: dxgmms1.sys
BAD_POOL_HEADER
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x00000019 (0x0000000000000020, 0xfffffa800ad94180, 0xfffffa800ad94ee0,
0x000000000cd6a240)
*** dxgmms1.sys - Address 0xfffff88006f9b8dc base at 0xfffff88006f7c000 DateStamp
0x4a5bc578
secondo errore
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: atikmdag.sys
BAD_POOL_CALLER
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x000000c2 (0x0000000000000007, 0x0000000000001097, 0x0000000000000000,
0xfffffa8008f03790)
*** atikmdag.sys - Address 0xfffff880076be0ad base at 0xfffff880072c3000 DateStamp
0x4f3b1dc8
terzo errore
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: ntoskrnl.exe
SYSTEM_SERVICE_EXCEPTION
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x0000003b (0x00000000c0000005, 0xfffff800030c5ac1, 0xfffff8800c9cf000,
0x0000000000000000)
*** ntoskrnl.exe - Address 0xfffff800030baf00 base at 0xfffff80003049000 DateStamp
0x4a5bc600
quarto errore
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: fltmgr.sys
NTFS_FILE_SYSTEM
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x00000024 (0x00000000001904fb, 0xfffff88003153688, 0xfffff88003152ee0,
0xfffff88000fb111e)
*** fltmgr.sys - Address 0xfffff88000fb111e base at 0xfffff88000f87000 DateStamp
0x4a5bc11f
ultimo errore
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: dxgmms1.sys
SYSTEM_SERVICE_EXCEPTION
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x0000003b (0x00000000c0000005, 0xfffff88006f81953, 0xfffff8800a84aad0,
0x0000000000000000)
*** dxgmms1.sys - Address 0xfffff88006f81953 base at 0xfffff88006f4a000 DateStamp
0x4a5bc578
usa windows 7 ultimate
cosa può fare?
Grazie