alto_e_GOBBO
03-01-2012, 22:15
Salve, mi è caduto uno dei portatili che ho nel quale è installato vista(!).
Non si è spento nella caduta, ma io pochi istanti dopo gli ho staccato l'alimentazione.
Dopo il primo riavvio mi è apparso questo errore:
intel undi, pxe-2.1 (build 082)
copyright (C) 1997-2000 intel corporation
for realtek rtl8139(x)/8130/810x pci fast ethernet controller v2.16 (041224)
PXE-E61: media test failure, check cable
PXE-M0F: exiting PXE ROM.
Forzo il riavvio:
adesso quando provo ad avviarlo, dopo pochi istanti che si avvia normalmente si blocca con una schermata scura con la freccia del mouse. Ho provato ad avviare il disco di ripristino, ma stessa cosa.
Ho inserito una pen drive con ubuntu 11.10 e quando provo ad aprire il devices Vista questo è il messaggio:
Unable to mount Vista
Error mounting: mount exited with exit code 13: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Failed to read NTFS $Bitmap: Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.
Non si è spento nella caduta, ma io pochi istanti dopo gli ho staccato l'alimentazione.
Dopo il primo riavvio mi è apparso questo errore:
intel undi, pxe-2.1 (build 082)
copyright (C) 1997-2000 intel corporation
for realtek rtl8139(x)/8130/810x pci fast ethernet controller v2.16 (041224)
PXE-E61: media test failure, check cable
PXE-M0F: exiting PXE ROM.
Forzo il riavvio:
adesso quando provo ad avviarlo, dopo pochi istanti che si avvia normalmente si blocca con una schermata scura con la freccia del mouse. Ho provato ad avviare il disco di ripristino, ma stessa cosa.
Ho inserito una pen drive con ubuntu 11.10 e quando provo ad aprire il devices Vista questo è il messaggio:
Unable to mount Vista
Error mounting: mount exited with exit code 13: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Failed to read NTFS $Bitmap: Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.