Zeratul
24-09-2011, 11:34
ciao a tutti
allora metto due banchi di ram, non identici, nella posizione corretta, ma non mi prende il dual channel.
Le ram sono di marca diversa, ma sempre 512 ddr 400.
Leggo dal sito intel:
"
Rules to enable dual channel mode
To achieve dual channel mode, the following conditions must be met:
Matched DIMM configuration in each channel
Same density (128 MB, 256 MB, 512 MB, etc.)
Matched in both Channel A and Channel B memory channels
Populate symmetrical memory slots (Slot 0 or Slot 1)
Configurations that do not match the above conditions revert to Single Channel mode.
The following conditions do not need to be met:
Same brand
Same timing specifications
Same DDR speed
"
come mai non si attiva? ho provato anche nella stessa mobo ram di diversa marca, ed effettivamente prende il dual channel.
queste invece che sto provando hanno delle caratteristiche leggermente diverse, tipo timing ed il fatto che una abbia i chip su singolo lato mentre l'altra su doppio lato. qui le caratteristiche da everest:
1
Elemento Valore
Proprietà modulo di memoria
Nome modulo Kingston K
Numero di serie 6B15CE22h (583931243)
Data di produzione Settimana 50 / 2000
Capacità modulo 512 MB (2 ranks, 4 banks)
Tipo modulo Unbuffered
Tipo memoria DDR SDRAM
Velocità PC3200 (200 MHz)
Ampiezza bus 64 bit
Voltaggio SSTL 2.5
Metodo rilevamento errore Nessuno
Frequenza di aggiornamento Ridotto (7.8 us), Self-Refresh
Timing della memoria
@ 200 MHz 3.0-3-3-8 (CL-RCD-RP-RAS) / 11-14-2 (RC-RFC-RRD)
@ 166 MHz 2.5-3-3-7 (CL-RCD-RP-RAS) / 10-12-2 (RC-RFC-RRD)
@ 133 MHz 2.0-2-2-6 (CL-RCD-RP-RAS) / 8-10-2 (RC-RFC-RRD)
Caratteristiche modulo di memoria
Early RAS# Precharge Non supportato
Auto-Precharge Non supportato
Precharge All Non supportato
Write1/Read Burst Non supportato
Buffered Address/Control Inputs Non supportato
Registered Address/Control Inputs Non supportato
On-Card PLL (Clock) Non supportato
Buffered DQMB Inputs Non supportato
Registered DQMB Inputs Non supportato
Differential Clock Input Supportato
Redundant Row Address Non supportato
Produttore
Nome società Kingston Technology Company, Inc.
Informazioni sul prodotto http://www.kingston.com/products/default.asp
2
Elemento Valore
Proprietà modulo di memoria
Nome modulo Infineon 64D64300HU5B
Numero di serie 0105C827h (667419905)
Data di produzione Settimana 24 / 2005
Capacità modulo 512 MB (1 rank, 4 banks)
Tipo modulo Unbuffered
Tipo memoria DDR SDRAM
Velocità PC3200 (200 MHz)
Ampiezza bus 64 bit
Voltaggio SSTL 2.5
Metodo rilevamento errore Nessuno
Frequenza di aggiornamento Ridotto (7.8 us), Self-Refresh
Timing della memoria
@ 200 MHz 3.0-3-3-8 (CL-RCD-RP-RAS) / 11-13-2 (RC-RFC-RRD)
@ 166 MHz 2.5-3-3-7 (CL-RCD-RP-RAS) / 10-11-2 (RC-RFC-RRD)
@ 133 MHz 2.0-2-2-6 (CL-RCD-RP-RAS) / 8-9-2 (RC-RFC-RRD)
Caratteristiche modulo di memoria
Early RAS# Precharge Supportato
Auto-Precharge Non supportato
Precharge All Non supportato
Write1/Read Burst Non supportato
Buffered Address/Control Inputs Non supportato
Registered Address/Control Inputs Non supportato
On-Card PLL (Clock) Non supportato
Buffered DQMB Inputs Non supportato
Registered DQMB Inputs Non supportato
Differential Clock Input Supportato
Redundant Row Address Non supportato
Produttore
Nome società Qimonda AG
Informazioni sul prodotto http://www.qimonda.com/computing-dram
vorrei cercare di individuare, se possibile, la causa del mancato funzionamento, in modo da sapere che banco dover comprare ed essere relativamente sicuro che mi funzioni.
qualcuno riesce a darmi una mano?
grazie
allora metto due banchi di ram, non identici, nella posizione corretta, ma non mi prende il dual channel.
Le ram sono di marca diversa, ma sempre 512 ddr 400.
Leggo dal sito intel:
"
Rules to enable dual channel mode
To achieve dual channel mode, the following conditions must be met:
Matched DIMM configuration in each channel
Same density (128 MB, 256 MB, 512 MB, etc.)
Matched in both Channel A and Channel B memory channels
Populate symmetrical memory slots (Slot 0 or Slot 1)
Configurations that do not match the above conditions revert to Single Channel mode.
The following conditions do not need to be met:
Same brand
Same timing specifications
Same DDR speed
"
come mai non si attiva? ho provato anche nella stessa mobo ram di diversa marca, ed effettivamente prende il dual channel.
queste invece che sto provando hanno delle caratteristiche leggermente diverse, tipo timing ed il fatto che una abbia i chip su singolo lato mentre l'altra su doppio lato. qui le caratteristiche da everest:
1
Elemento Valore
Proprietà modulo di memoria
Nome modulo Kingston K
Numero di serie 6B15CE22h (583931243)
Data di produzione Settimana 50 / 2000
Capacità modulo 512 MB (2 ranks, 4 banks)
Tipo modulo Unbuffered
Tipo memoria DDR SDRAM
Velocità PC3200 (200 MHz)
Ampiezza bus 64 bit
Voltaggio SSTL 2.5
Metodo rilevamento errore Nessuno
Frequenza di aggiornamento Ridotto (7.8 us), Self-Refresh
Timing della memoria
@ 200 MHz 3.0-3-3-8 (CL-RCD-RP-RAS) / 11-14-2 (RC-RFC-RRD)
@ 166 MHz 2.5-3-3-7 (CL-RCD-RP-RAS) / 10-12-2 (RC-RFC-RRD)
@ 133 MHz 2.0-2-2-6 (CL-RCD-RP-RAS) / 8-10-2 (RC-RFC-RRD)
Caratteristiche modulo di memoria
Early RAS# Precharge Non supportato
Auto-Precharge Non supportato
Precharge All Non supportato
Write1/Read Burst Non supportato
Buffered Address/Control Inputs Non supportato
Registered Address/Control Inputs Non supportato
On-Card PLL (Clock) Non supportato
Buffered DQMB Inputs Non supportato
Registered DQMB Inputs Non supportato
Differential Clock Input Supportato
Redundant Row Address Non supportato
Produttore
Nome società Kingston Technology Company, Inc.
Informazioni sul prodotto http://www.kingston.com/products/default.asp
2
Elemento Valore
Proprietà modulo di memoria
Nome modulo Infineon 64D64300HU5B
Numero di serie 0105C827h (667419905)
Data di produzione Settimana 24 / 2005
Capacità modulo 512 MB (1 rank, 4 banks)
Tipo modulo Unbuffered
Tipo memoria DDR SDRAM
Velocità PC3200 (200 MHz)
Ampiezza bus 64 bit
Voltaggio SSTL 2.5
Metodo rilevamento errore Nessuno
Frequenza di aggiornamento Ridotto (7.8 us), Self-Refresh
Timing della memoria
@ 200 MHz 3.0-3-3-8 (CL-RCD-RP-RAS) / 11-13-2 (RC-RFC-RRD)
@ 166 MHz 2.5-3-3-7 (CL-RCD-RP-RAS) / 10-11-2 (RC-RFC-RRD)
@ 133 MHz 2.0-2-2-6 (CL-RCD-RP-RAS) / 8-9-2 (RC-RFC-RRD)
Caratteristiche modulo di memoria
Early RAS# Precharge Supportato
Auto-Precharge Non supportato
Precharge All Non supportato
Write1/Read Burst Non supportato
Buffered Address/Control Inputs Non supportato
Registered Address/Control Inputs Non supportato
On-Card PLL (Clock) Non supportato
Buffered DQMB Inputs Non supportato
Registered DQMB Inputs Non supportato
Differential Clock Input Supportato
Redundant Row Address Non supportato
Produttore
Nome società Qimonda AG
Informazioni sul prodotto http://www.qimonda.com/computing-dram
vorrei cercare di individuare, se possibile, la causa del mancato funzionamento, in modo da sapere che banco dover comprare ed essere relativamente sicuro che mi funzioni.
qualcuno riesce a darmi una mano?
grazie