nighteyes
18-11-2010, 09:37
Vendo Fiio E7 (USB Dac e AMP) comprato a settembre 2010 dal sito MP4 Nation! e arrivato il 19/10/2010.
Condizioni del Fiio E7:
* Purtroppo ci sono alcuni graffi di cui due sullo schermo..
* E' stato utilizzato per circa 200 ore (stima effettuata in eccesso).
* Sono presenti tutti gli accessori.
Prezzo:
* 55€ comprese spese di spedizione tramite SpedireWeb (http://www.spedireweb.it/).
Per un'eventuale spedizione tramite altri mezzi (pacco j3 delle Poste Italiane), la differenza è a carico dell'acquirente.
Foto:
* Saranno postate il prima possibile.
Condizioni di vendita:
* Effettuo la spedizione solo tramite metodi tracciabili.
* Pagamento tramite bonifico bancario o ricarica PostePay.
* Possibilità di scambio a mano nella zona di Vicenza centro durante i week-end e Padova centro durante la settimana.
* Se chiedete uno sconto perché avete visto un prezzo più basso, mandatemi il link, grazie
* Accetto scambi (più eventuale integrazione) con schede Micro SDHC con le seguenti caratteristiche:
- almeno 8GB
- almeno classe 4
- marca SanDisk o Kingston (preferita)
* Accetto anche scambi con Hard Disk esterni autoalimentati da 2,5" delle seguenti marche:
- Buffalo
- Toshiba
- Western Digital
* Posso considerare anche altri scambi, ma non con IEM.
Specifiche Tecniche:
Specification:
●Output Power:
150mW (16Ω); 16mW (300Ω)
●Headphone Impedance Range:
16 Ω ~ 300 Ω
●Signal to Noise Ratio:
≥95dB (A weighted) on line-in;
≥100dB (A weighted) on USB-in
●Distortion:
<0.009% (10mW)on line-in;
<0.008% (10mW) on USB-in
●Frequency Range:
10Hz ~ 1000KHz
●Power Supply:
Internal 1050mAH rechargeable Li-ion battery
●Recharging:
USB 5V DC 400mA
●Size: 96mm x 55mm x 15.5mm
●Weight: 100g
Note: Due to the USB spec restriction on digital audio format. This device only support up to 48kHz / 16bits USB decoding function.
Quote:
Main Features：
●USB audio decoding and output for PC, functioning as a high quality external USB soundcard*;
●Texas Instruments’ PCM2706 serves as USB receiver. For better sound quality, a Wolfson WM8740 serves as digital-to-analog convertor (DAC), pairing with a high performance operational amplifier from ADI for the DAC circuit;
●Build-in headphone amplifier utilizing AD8692 and Texas Instruments’ TPA6130A as pre- and power-amp for high performance, good resolution, low distortion, and powerful output;
●Standard 3.5mm stereo line-in jack for portable amplification with conventional audio source;
●Dual 3.5mm headphone output jack. Convenient design makes it easy to share music between two listeners;
●World’s first portable headphone amplifier with dual colors OLED display;
●Easy to use digital volume control function with great precision and channel balance;
●Build-in EQ for 3 levels of Bass Boost;
●Build-in rechargeable 1050 mAH Li-ion battery for 80 hours of continuous operation**;
●Specialized dock for connecting E9*** to experience an even higher performance;
●Quality anodized aluminum satin finish case design, small and compact, ideal to be wrapped together with digital audio player;
●User selectable USB charging function to help prolong battery lifespan and lower distortion from power supply circuit;
●User definable startup volume memory and maximum volume limiter to protect user from hearing damage due to loud volume;
●Automatic keylock feature;
●User definable sleep timer function and total runtime display****.
* This model supports driverless plug and play on Windows XP, Windows 2000, Vista, Windows 7, and various Mac OS.
** Full battery charge via computer USB port after 200 minutes and capable of 80 hours of continuous operation, tested under laboratory condition for evaluative purpose only.
*** E9 is a desktop amplifier with greater output, better performance and an integrated E7 specified dock connector. With the dock, E7 can easily establish a line-out connection with E9 and transform both together into a high performance desktop amp with USB decoding function, capable of PC connection and recharging functions, etc.
**** Total system runtime will accumulate from the first use. It will be reset to zero after either reset button is pressed, reloading default setting, or when the battery depleted
Condizioni del Fiio E7:
* Purtroppo ci sono alcuni graffi di cui due sullo schermo..
* E' stato utilizzato per circa 200 ore (stima effettuata in eccesso).
* Sono presenti tutti gli accessori.
Prezzo:
* 55€ comprese spese di spedizione tramite SpedireWeb (http://www.spedireweb.it/).
Per un'eventuale spedizione tramite altri mezzi (pacco j3 delle Poste Italiane), la differenza è a carico dell'acquirente.
Foto:
* Saranno postate il prima possibile.
Condizioni di vendita:
* Effettuo la spedizione solo tramite metodi tracciabili.
* Pagamento tramite bonifico bancario o ricarica PostePay.
* Possibilità di scambio a mano nella zona di Vicenza centro durante i week-end e Padova centro durante la settimana.
* Se chiedete uno sconto perché avete visto un prezzo più basso, mandatemi il link, grazie
* Accetto scambi (più eventuale integrazione) con schede Micro SDHC con le seguenti caratteristiche:
- almeno 8GB
- almeno classe 4
- marca SanDisk o Kingston (preferita)
* Accetto anche scambi con Hard Disk esterni autoalimentati da 2,5" delle seguenti marche:
- Buffalo
- Toshiba
- Western Digital
* Posso considerare anche altri scambi, ma non con IEM.
Specifiche Tecniche:
Specification:
●Output Power:
150mW (16Ω); 16mW (300Ω)
●Headphone Impedance Range:
16 Ω ~ 300 Ω
●Signal to Noise Ratio:
≥95dB (A weighted) on line-in;
≥100dB (A weighted) on USB-in
●Distortion:
<0.009% (10mW)on line-in;
<0.008% (10mW) on USB-in
●Frequency Range:
10Hz ~ 1000KHz
●Power Supply:
Internal 1050mAH rechargeable Li-ion battery
●Recharging:
USB 5V DC 400mA
●Size: 96mm x 55mm x 15.5mm
●Weight: 100g
Note: Due to the USB spec restriction on digital audio format. This device only support up to 48kHz / 16bits USB decoding function.
Quote:
Main Features：
●USB audio decoding and output for PC, functioning as a high quality external USB soundcard*;
●Texas Instruments’ PCM2706 serves as USB receiver. For better sound quality, a Wolfson WM8740 serves as digital-to-analog convertor (DAC), pairing with a high performance operational amplifier from ADI for the DAC circuit;
●Build-in headphone amplifier utilizing AD8692 and Texas Instruments’ TPA6130A as pre- and power-amp for high performance, good resolution, low distortion, and powerful output;
●Standard 3.5mm stereo line-in jack for portable amplification with conventional audio source;
●Dual 3.5mm headphone output jack. Convenient design makes it easy to share music between two listeners;
●World’s first portable headphone amplifier with dual colors OLED display;
●Easy to use digital volume control function with great precision and channel balance;
●Build-in EQ for 3 levels of Bass Boost;
●Build-in rechargeable 1050 mAH Li-ion battery for 80 hours of continuous operation**;
●Specialized dock for connecting E9*** to experience an even higher performance;
●Quality anodized aluminum satin finish case design, small and compact, ideal to be wrapped together with digital audio player;
●User selectable USB charging function to help prolong battery lifespan and lower distortion from power supply circuit;
●User definable startup volume memory and maximum volume limiter to protect user from hearing damage due to loud volume;
●Automatic keylock feature;
●User definable sleep timer function and total runtime display****.
* This model supports driverless plug and play on Windows XP, Windows 2000, Vista, Windows 7, and various Mac OS.
** Full battery charge via computer USB port after 200 minutes and capable of 80 hours of continuous operation, tested under laboratory condition for evaluative purpose only.
*** E9 is a desktop amplifier with greater output, better performance and an integrated E7 specified dock connector. With the dock, E7 can easily establish a line-out connection with E9 and transform both together into a high performance desktop amp with USB decoding function, capable of PC connection and recharging functions, etc.
**** Total system runtime will accumulate from the first use. It will be reset to zero after either reset button is pressed, reloading default setting, or when the battery depleted