DeanDixie
02-11-2010, 16:31
Ciao a tutti, sono un nuovo utente
Ho un desktop hp pavilion con scheda madre P5LP-LE
http://h10025.www1.hp.com/ewfrf/wc/document?cc=it&lc=it&dlc=it&docname=c00864946#N52
e volevo cambiare la poca ram che ho (2x1gb 330mhz) con due schede da 2gb a 667mhz..
Poi mi e stato detto che se prendo una a 800mhz questa andrà sempre a 667 e girerà meglio.
allora ho dato un occhiata in giro ed ho visto questa:
4GB (2GB 256M x 64-Bit x 2 pcs.)
PC2-6400 CL5 240-Pin DIMM Kit
Power supply : Vdd: 1.8V ± 0.1V, Vddq: 1.8V ± 0.1V
Double-data-rate architecture; two data transfers per clock cycle
Bidirectional data strobe(DQS)
Differential clock inputs(CK and CK)
DLL aligns DQ and DQS transition with CK transition
Programmable Read latency 5 (clock)
Burst Length: 4, 8 (Interleave/nibble sequential)
Programmable Burst type (sequential & interleave)
Timing Reference: 5-5-5-15 at +1.8V / 5-5-5-15 at +1.85V
Edge aligned data output, center aligned data input
Auto & Self refresh, 7.8us refresh interval (8K/64ms refresh)
Serial presence detect with EEPROM
High Performance Heat Spreader
PCB : Height 1.180” (30.00mm), double sided component
che viene presentata come una signora ram.
bene ..ma credo che è pc2-6400 come ho visto essere tutte le altre ram a 800mhz..è così o mi sbaglio?Potrei aver detto anche una boiata ma mi è parso così..
e se è così..potrà funzionare sulla mia scheda madre che riporta pc2 5300 ma non 6400?:fagiano:
speriamo...:S
grazie in anticipo
Ho un desktop hp pavilion con scheda madre P5LP-LE
http://h10025.www1.hp.com/ewfrf/wc/document?cc=it&lc=it&dlc=it&docname=c00864946#N52
e volevo cambiare la poca ram che ho (2x1gb 330mhz) con due schede da 2gb a 667mhz..
Poi mi e stato detto che se prendo una a 800mhz questa andrà sempre a 667 e girerà meglio.
allora ho dato un occhiata in giro ed ho visto questa:
4GB (2GB 256M x 64-Bit x 2 pcs.)
PC2-6400 CL5 240-Pin DIMM Kit
Power supply : Vdd: 1.8V ± 0.1V, Vddq: 1.8V ± 0.1V
Double-data-rate architecture; two data transfers per clock cycle
Bidirectional data strobe(DQS)
Differential clock inputs(CK and CK)
DLL aligns DQ and DQS transition with CK transition
Programmable Read latency 5 (clock)
Burst Length: 4, 8 (Interleave/nibble sequential)
Programmable Burst type (sequential & interleave)
Timing Reference: 5-5-5-15 at +1.8V / 5-5-5-15 at +1.85V
Edge aligned data output, center aligned data input
Auto & Self refresh, 7.8us refresh interval (8K/64ms refresh)
Serial presence detect with EEPROM
High Performance Heat Spreader
PCB : Height 1.180” (30.00mm), double sided component
che viene presentata come una signora ram.
bene ..ma credo che è pc2-6400 come ho visto essere tutte le altre ram a 800mhz..è così o mi sbaglio?Potrei aver detto anche una boiata ma mi è parso così..
e se è così..potrà funzionare sulla mia scheda madre che riporta pc2 5300 ma non 6400?:fagiano:
speriamo...:S
grazie in anticipo