myotismon
28-06-2010, 07:54
salve a tutti sono nuovo di linux
ho installato ubuntu 8.04.1 su virtualbox
vorrei usarlo come faxserver con un modem usb
e ho installato hylafax_6.0.4/4.4.6/4.3.9 (ultima release)
(per la porta ttsy non ho messo niente)
ho seguito le varie guide ho configurato il fax con prefisso, numero di telefono, ecc ma dopo aver confermato le mie impostazioni mi dice:
"now we are going to probe the tty port to figure out the type of mode that is attached. this takes a few seconds, so be patient. note that if you do not have the modem cable to the port, or the modem is turned off, this may hang (just go and cable up the modem or turn it on, or whatever).
probing for best speed to talk to modem:
unable to deduce DTE-DCE speed; check that you are using the correct device and/or that your modem is setup properly. if all else fails, try the -s option to lock the speed."
e da qui mi sono bloccato, non capisco se funziona oppure no, e come posso fare la funziona -s?
qualcuno se puo aiutarmi
grazie
visto ?
http://wiki.ubuntu-it.org/Server/HylaFax
myotismon
28-06-2010, 16:14
nella guida dicono:
FASE1
"Prima di iniziare la configurazione controllare il corretto collegamento del modem/fax. Digitare in una finestra di terminale del server il seguente comando:
echo "ATDT123456789" > /dev/ttyS0"
mi blocco già qui....credo che la macchina virtuale non mi veda il modem usb
mi sa che devi attivarlo
tipo:
http://giornaledisistema.blogspot.com/2007/06/virtualbox-come-configurare-le-porte.html
http://www.dgxstyle.net/2009/09/26/abilitare-il-supporto-usb-per-virtualbox-su-ubuntu/
myotismon
28-06-2010, 18:13
fatto
ma mi da errore di connessione
quando clicco su dispositivi/usb
vedi che sono riconosciuti gli usb?
con: lsusb
p.s.
vedi errori in: dmesg
myotismon
29-06-2010, 13:55
ho provato con i 2 comandi lsusb e dmesg
ecco il risultato
root@utente-desktop:~# lsusb
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 002: ID 80ee:0021
Bus 001 Device 001: ID 0000:0000
root@utente-desktop:~# dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-28-generic (buildd@rothera) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)) #1 SMP Thu May 27 00:16:49 UTC 2010 (Ubuntu 2.6.24-28.70-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[ 0.000000] BIOS-e820: 000000001fff0000 - 0000000020000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 131056
[ 0.000000] HighMem 131056 -> 131056
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 131056
[ 0.000000] On node 0 totalpages: 131056
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 991 pages used for memmap
[ 0.000000] Normal zone: 125969 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.5 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00E0000 checksum 0
[ 0.000000] ACPI: RSDP 000E0000, 0024 (r2 VBOX )
[ 0.000000] ACPI: XSDT 1FFF0030, 0034 (r1 VBOX VBOXXSDT 1 ASL 61)
[ 0.000000] ACPI: FACP 1FFF00F0, 00F4 (r4 VBOX VBOXFACP 1 ASL 61)
[ 0.000000] ACPI: DSDT 1FFF0410, 18FF (r1 VBOX VBOXBIOS 2 INTL 20050309)
[ 0.000000] ACPI: FACS 1FFF0200, 0040
[ 0.000000] ACPI: SSDT 1FFF0240, 01CC (r1 VBOX VBOXCPUT 2 INTL 20050309)
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dffc0000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130033
[ 0.000000] Kernel command line: root=UUID=bd28d6af-4c9d-450e-a754-0b419b39301d ro quiet splash
[ 0.000000] Found and enabled local APIC!
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 2816.231 MHz processor.
[ 11.168830] Console: colour VGA+ 80x25
[ 11.168833] console [tty0] enabled
[ 11.168886] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 11.168959] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 11.173252] Memory: 507644k/524224k available (2182k kernel code, 15968k reserved, 1005k data, 368k init, 0k highmem)
[ 11.173257] virtual kernel memory layout:
[ 11.173258] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 11.173258] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 11.173259] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 11.173260] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
[ 11.173260] .init : 0xc0423000 - 0xc047f000 ( 368 kB)
[ 11.173261] .data : 0xc03218ba - 0xc041cdc4 (1005 kB)
[ 11.173262] .text : 0xc0100000 - 0xc03218ba (2182 kB)
[ 11.173264] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 11.174580] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 11.174695] Calibrating delay loop (skipped), using tsc calculated value.. 5632.46 BogoMIPS (lpj=11264924)
[ 11.174715] Security Framework initialized
[ 11.174718] SELinux: Disabled at boot.
[ 11.174726] AppArmor: AppArmor initialized
[ 11.174728] Failure registering capabilities with primary security module.
[ 11.174733] Mount-cache hash table entries: 512
[ 11.176287] Initializing cgroup subsys ns
[ 11.176292] Initializing cgroup subsys cpuacct
[ 11.176326] CPU: After generic identify, caps: 078bfbbf 00000000 00000000 00000000 00000209 00000000 00000000 00000000
[ 11.176330] monitor/mwait feature present.
[ 11.176331] using mwait in idle threads.
[ 11.176350] , L1 D cache: 32K
[ 11.176351] CPU: L2 cache: 6144K
[ 11.176357] CPU: After all inits, caps: 078bfbbf 00000000 00000000 00040140 00000209 00000000 00000000 00000000
[ 11.176363] Compat vDSO mapped to ffffe000.
[ 11.176397] Checking 'hlt' instruction... OK.
[ 11.193889] SMP alternatives: switching to UP code
[ 11.206141] Freeing SMP alternatives: 11k freed
[ 11.206210] Early unpacking initramfs... done
[ 11.434122] ACPI: Core revision 20070126
[ 11.434196] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 11.434658] ACPI: setting ELCR to 0200 (from 0e20)
[ 11.434725] CPU0: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz stepping 0a
[ 11.434745] SMP motherboard not detected.
[ 11.542967] Brought up 1 CPUs
[ 11.547758] CPU0 attaching sched-domain:
[ 11.547778] domain 0: span 01
[ 11.547779] groups: 01
[ 11.548567] net_namespace: 64 bytes
[ 11.548613] Booting paravirtualized kernel on bare hardware
[ 11.549086] Time: 12:48:14 Date: 06/29/10
[ 11.549161] NET: Registered protocol family 16
[ 11.549469] EISA bus registered
[ 11.549584] ACPI: bus type pci registered
[ 11.549849] PCI: PCI BIOS revision 2.10 entry at 0xfc130, last bus=0
[ 11.549850] PCI: Using configuration type 1
[ 11.549862] Setting up standard PCI resources
[ 11.551190] ACPI: EC: Look up EC in DSDT
[ 11.553727] ACPI: Interpreter enabled
[ 11.553733] ACPI: (supports S0 S5)
[ 11.553741] ACPI: Using PIC for interrupt routing
[ 11.555430] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 11.565802] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 11.569392] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 9 10 11)
[ 11.569634] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
[ 11.569722] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
[ 11.569805] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
[ 11.569966] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 11.570010] pnp: PnP ACPI init
[ 11.570022] ACPI: bus type pnp registered
[ 11.570760] pnp: PnP ACPI: found 5 devices
[ 11.570762] ACPI: ACPI bus type pnp unregistered
[ 11.570775] PnPBIOS: Disabled by ACPI PNP
[ 11.571097] PCI: Using ACPI for IRQ routing
[ 11.571098] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 14.520839] NET: Registered protocol family 8
[ 14.521606] NET: Registered protocol family 20
[ 14.545057] AppArmor: AppArmor Filesystem Enabled
[ 14.548688] Time: tsc clocksource has been installed.
[ 15.064855] NET: Registered protocol family 2
[ 15.104867] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 15.105043] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 15.105188] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 15.105330] TCP: Hash tables configured (established 16384 bind 16384)
[ 15.105335] TCP reno registered
[ 15.116899] checking if image is initramfs... it is
[ 15.556968] Freeing initrd memory: 7324k freed
[ 15.558832] audit: initializing netlink socket (disabled)
[ 15.558859] audit(1277815695.468:1): initialized
[ 15.562431] VFS: Disk quotas dquot_6.5.1
[ 15.562489] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 15.562682] io scheduler noop registered
[ 15.562683] io scheduler anticipatory registered
[ 15.562684] io scheduler deadline registered
[ 15.562691] io scheduler cfq registered (default)
[ 15.562704] Limiting direct PCI/PCI transfers.
[ 15.562730] Activating ISA DMA hang workarounds.
[ 15.562743] Boot video device is 0000:00:02.0
[ 15.563024] isapnp: Scanning for PnP cards...
[ 15.572048] Switched to high resolution mode on CPU 0
[ 15.938888] isapnp: No Plug & Play device found
[ 15.955601] Real Time Clock Driver v1.12ac
[ 15.955679] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 15.956395] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 15.956439] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 15.956502] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 15.956949] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 15.956952] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 15.967265] mice: PS/2 mouse device common for all mice
[ 15.967622] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 15.967633] EISA: Probing bus 0 at eisa.0
[ 15.967658] Cannot allocate resource for EISA slot 4
[ 15.967683] EISA: Detected 0 cards.
[ 15.967689] cpuidle: using governor ladder
[ 15.967690] cpuidle: using governor menu
[ 15.967752] NET: Registered protocol family 1
[ 15.967789] Using IPI No-Shortcut mode
[ 15.967815] registered taskstats version 1
[ 15.967912] Magic number: 14:239:836
[ 15.967950] hash matches device ptyu2
[ 15.967968] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 15.967969] EDD information not available.
[ 15.968228] Freeing unused kernel memory: 368k freed
[ 15.969632] Write protecting the kernel read-only data: 803k
[ 18.295408] fuse init (API version 7.9)
[ 19.110833] SCSI subsystem initialized
[ 19.153869] libata version 3.00 loaded.
[ 19.164279] PCI: Setting latency timer of device 0000:00:01.1 to 64
[ 19.180160] ata_piix 0000:00:01.1: version 2.12
[ 19.193999] scsi0 : ata_piix
[ 19.209927] scsi1 : ata_piix
[ 19.209927] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[ 19.209927] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[ 19.220284] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
[ 19.220286] Copyright (c) 1999-2006 Intel Corporation.
[ 19.272077] usbcore: registered new interface driver usbfs
[ 19.272092] usbcore: registered new interface driver hub
[ 19.297502] usbcore: registered new device driver usb
[ 19.309473] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 19.677038] ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
[ 19.832778] ata2.00: configured for UDMA/33
[ 19.833092] scsi 1:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
[ 19.835026] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 19.835029] PCI: setting IRQ 10 as level-triggered
[ 19.835036] ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 19.835064] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 20.183277] e1000: 0000:00:03.0: e1000_probe: (PCI:33MHz:32-bit) 08:00:27:28:5f:9a
[ 20.449235] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 20.449264] ahci 0000:00:0d.0: version 3.0
[ 20.449881] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
[ 20.449883] PCI: setting IRQ 5 as level-triggered
[ 20.449891] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
[ 21.449872] ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[ 21.449876] ahci 0000:00:0d.0: flags: 64bit ncq stag only
[ 21.449899] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 21.454080] scsi2 : ahci
[ 21.454187] ata3: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806100 irq 5
[ 21.928946] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 21.929107] ata3.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
[ 21.929109] ata3.00: 21053440 sectors, multi 128: LBA48 NCQ (depth 31/32)
[ 21.929282] ata3.00: configured for UDMA/133
[ 21.929366] scsi 2:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
[ 21.930686] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 21.930689] PCI: setting IRQ 11 as level-triggered
[ 21.930696] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 21.930731] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 21.930744] ohci_hcd 0000:00:06.0: OHCI Host Controller
[ 21.930924] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 1
[ 21.930954] ohci_hcd 0000:00:06.0: irq 11, io mem 0xf0804000
[ 21.985116] usb usb1: configuration #1 chosen from 1 choice
[ 21.985130] hub 1-0:1.0: USB hub found
[ 21.985144] hub 1-0:1.0: 8 ports detected
[ 22.039289] Driver 'sd' needs updating - please use bus_type methods
[ 22.039363] sd 2:0:0:0: [sda] 21053440 512-byte hardware sectors (10779 MB)
[ 22.039369] sd 2:0:0:0: [sda] Write Protect is off
[ 22.039371] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 22.039379] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 22.039412] sd 2:0:0:0: [sda] 21053440 512-byte hardware sectors (10779 MB)
[ 22.039417] sd 2:0:0:0: [sda] Write Protect is off
[ 22.039418] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 22.039427] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 22.039429] sda: sda1 sda2 < sda5 >
[ 22.058167] sd 2:0:0:0: [sda] Attached SCSI disk
[ 22.067841] scsi 1:0:0:0: Attached scsi generic sg0 type 5
[ 22.067853] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 22.089283] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 22.089319] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 22.089332] ehci_hcd 0000:00:0b.0: EHCI Host Controller
[ 22.089395] ehci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
[ 22.089631] ehci_hcd 0000:00:0b.0: irq 10, io mem 0xf0805000
[ 22.100628] ehci_hcd 0000:00:0b.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 22.100703] usb usb2: configuration #1 chosen from 1 choice
[ 22.100722] hub 2-0:1.0: USB hub found
[ 22.100726] hub 2-0:1.0: 8 ports detected
[ 22.261958] Driver 'sr' needs updating - please use bus_type methods
[ 22.267608] sr0: scsi3-mmc drive: 32x/32x xa/form2 tray
[ 22.267611] Uniform CD-ROM driver Revision: 3.20
[ 22.267709] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 22.620869] Attempting manual resume
[ 22.620871] swsusp: Resume From Partition 8:5
[ 22.620872] PM: Checking swsusp image.
[ 22.621174] PM: Resume from disk failed.
[ 22.655395] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 22.655397] EXT3-fs: write access will be enabled during recovery.
[ 22.772266] kjournald starting. Commit interval 5 seconds
[ 22.772279] EXT3-fs: sda1: orphan cleanup on readonly fs
[ 22.772283] ext3_orphan_cleanup: deleting unreferenced inode 73453
[ 22.772305] EXT3-fs: sda1: 1 orphan inode deleted
[ 22.772306] EXT3-fs: recovery complete.
[ 22.772915] EXT3-fs: mounted filesystem with ordered data mode.
[ 23.314553] usb 1-1: new full speed USB device using ohci_hcd and address 2
[ 23.521558] /build/buildd/linux-2.6.24/drivers/usb/core/inode.c: usbfs: unrecognised mount option "devgid=[b]1002" or missing value
[ 23.521560]
[ 23.521562] /build/buildd/linux-2.6.24/drivers/usb/core/inode.c: usbfs: mount parameter error:
[ 24.080368] usb 1-1: configuration #1 chosen from 1 choice
[ 30.151097] input: Power Button (FF) as /devices/virtual/input/input2
[ 30.162699] ACPI: Power Button (FF) [PWRF]
[ 30.162873] input: Sleep Button (FF) as /devices/virtual/input/input3
[ 30.178789] ACPI: Sleep Button (FF) [SLPF]
[ 30.212141] udev: renamed network interface eth0 to eth1
[ 30.482960] ACPI: AC Adapter [AC] (on-line)
[ 30.910586] usbcore: registered new interface driver hiddev
[ 30.931674] input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/input/input4
[ 30.945498] input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1
[ 30.945510] usbcore: registered new interface driver usbhid
[ 30.945517] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 31.144434] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 31.287015] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6
[ 31.350343] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
[ 31.350396] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 31.476272] parport_pc 00:04: reported by Plug and Play ACPI
[ 32.039483] intel8x0_measure_ac97_clock: measured 52370 usecs
[ 32.039485] intel8x0: measured clock 170918 rejected
[ 32.039487] intel8x0: clocking to 48000
[ 36.306677] lp: driver loaded but no devices found
[ 36.494211] Adding 489940k swap on /dev/sda5. Priority:-1 extents:1 across:489940k
[ 37.136029] EXT3 FS on sda1, internal journal
[ 38.968332] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 40.381163] No dock devices found.
[ 42.150569] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 42.150574] apm: overridden by ACPI.
[ 42.357793] ppdev: user-space parallel port driver
[ 42.441241] audit(1277815725.517:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4581 profile="/usr/sbin/cupsd" namespace="default"
[ 49.902492] e1000: eth1: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 50.157511] Bluetooth: Core ver 2.11
[ 50.158223] NET: Registered protocol family 31
[ 50.158225] Bluetooth: HCI device and connection manager initialized
[ 50.158228] Bluetooth: HCI socket layer initialized
[ 50.199307] Bluetooth: L2CAP ver 2.9
[ 50.199311] Bluetooth: L2CAP socket layer initialized
[ 50.233597] Bluetooth: RFCOMM socket layer initialized
[ 50.233665] Bluetooth: RFCOMM TTY layer initialized
[ 50.233666] Bluetooth: RFCOMM ver 1.8
[ 52.334015] mtrr: your processor doesn't support write-combining
[ 52.334577] mtrr: your processor doesn't support write-combining
[ 54.215931] NET: Registered protocol family 17
[ 58.066839] NET: Registered protocol family 10
[ 58.067197] lo: Disabled Privacy Extensions
[ 68.272875] eth1: no IPv6 routers present
vede solo :
Bus 001 Device 002: ID 80ee:0021
e' un mouse?
...
input,hidraw0: USB HID v1.10 Mouse
...
p.s.
dovresti vederlo con gli stessi ID, sia sull'host che sul guest
myotismon
29-06-2010, 18:26
ce il mouse e la tastiera che sono infrarossi
quindi non ritrovi il modem?
vBulletin® v3.6.4, Copyright ©2000-2025, Jelsoft Enterprises Ltd.