Kevin
20-06-2010, 14:15
questa è la mia configurazione:
acer aspire 1511LMi
Name AMD Athlon 64 3000+
Codename ClawHammer
Specification AMD Athlon 64 Processor 3000+
Package Socket 754
CPUID F.4.A
Extended CPUID F.4
Brand ID 4
Core Stepping SH7-CG
Technology 0.13 um
Core Speed 798.0 MHz
Multiplier x FSB 4.0 x 199.5 MHz
HT Link speed 598.5 MHz
Stock frequency 1800 MHz
Instructions sets MMX (+), 3DNow! (+), SSE, SSE2, x86-64
L1 Data cache 64 KBytes, 2-way set associative, 64-byte line size
L1 Instruction cache 64 KBytes, 2-way set associative, 64-byte line size
L2 cache 1024 KBytes, 16-way set associative, 64-byte line size
FID/VID Control yes
Max FID 9.0x
Northbridge NVIDIA nForce3 150 rev. A4
Southbridge NVIDIA nForce3 MCP rev. A6
Graphic Interface AGP
AGP Revision 3.0
AGP Transfer Rate 8x
AGP SBA supported, enabled
Memory Type DDR
Memory Size 1024 MBytes
Channels Single
Memory Frequency 159.6 MHz (CPU/5)
CAS# latency (CL) 3.0
RAS# to CAS# delay (tRCD) 3
RAS# Precharge (tRP) 3
Cycle Time (tRAS) 8
Bank Cycle Time (tRC) 11
DRAM Idle Timer 16
Command Rate (CR) 2T
DIMM # 1
SMBus address 0x51
Memory type DDR
Manufacturer (ID) OCZ (7F7F7F7FB0000000)
Size 1024 MBytes
Max bandwidth PC3200 (200 MHz)
Part number OCZ4001024VSO
Number of banks 2
Data width 64 bits
Correction None
Registered no
Buffered no
Nominal Voltage 2.50 Volts
EPP no
XMP no
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 2.5-3-3-7-0 @ 166 MHz
JEDEC #2 3.0-3-3-8-0 @ 200 MHz
con un banco di memoria che è sopra descritto tutto ok,installandone un altro banco nello slot libero il pc alcune volte va in crash,ovviamente ho provato a scambiare gli slot e i banchi ma il risultato è uguale,da cosa puo' dipendere?
acer aspire 1511LMi
Name AMD Athlon 64 3000+
Codename ClawHammer
Specification AMD Athlon 64 Processor 3000+
Package Socket 754
CPUID F.4.A
Extended CPUID F.4
Brand ID 4
Core Stepping SH7-CG
Technology 0.13 um
Core Speed 798.0 MHz
Multiplier x FSB 4.0 x 199.5 MHz
HT Link speed 598.5 MHz
Stock frequency 1800 MHz
Instructions sets MMX (+), 3DNow! (+), SSE, SSE2, x86-64
L1 Data cache 64 KBytes, 2-way set associative, 64-byte line size
L1 Instruction cache 64 KBytes, 2-way set associative, 64-byte line size
L2 cache 1024 KBytes, 16-way set associative, 64-byte line size
FID/VID Control yes
Max FID 9.0x
Northbridge NVIDIA nForce3 150 rev. A4
Southbridge NVIDIA nForce3 MCP rev. A6
Graphic Interface AGP
AGP Revision 3.0
AGP Transfer Rate 8x
AGP SBA supported, enabled
Memory Type DDR
Memory Size 1024 MBytes
Channels Single
Memory Frequency 159.6 MHz (CPU/5)
CAS# latency (CL) 3.0
RAS# to CAS# delay (tRCD) 3
RAS# Precharge (tRP) 3
Cycle Time (tRAS) 8
Bank Cycle Time (tRC) 11
DRAM Idle Timer 16
Command Rate (CR) 2T
DIMM # 1
SMBus address 0x51
Memory type DDR
Manufacturer (ID) OCZ (7F7F7F7FB0000000)
Size 1024 MBytes
Max bandwidth PC3200 (200 MHz)
Part number OCZ4001024VSO
Number of banks 2
Data width 64 bits
Correction None
Registered no
Buffered no
Nominal Voltage 2.50 Volts
EPP no
XMP no
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 2.5-3-3-7-0 @ 166 MHz
JEDEC #2 3.0-3-3-8-0 @ 200 MHz
con un banco di memoria che è sopra descritto tutto ok,installandone un altro banco nello slot libero il pc alcune volte va in crash,ovviamente ho provato a scambiare gli slot e i banchi ma il risultato è uguale,da cosa puo' dipendere?