marcobirello
21-01-2010, 13:05
Ciao a tutti
Ho un vecchio computer che sto cercando di rianimare... questo pc è del 2004 ed ha le seguenti caratteristiche:
Scheda madre Quasar2 (MS6786) KM400A ver 2.0
CPU AMD Sempron 2800+
Ram 1,43 GB DDR DRAM DIMM 168 pins
Scheda video della Via 3SG Unichrome IGP. Con slot AGP 4x 8x Full Featured Accelerated Graphics Port (AGP) Controller
* Supports 533 MHz 8x, 266 MHz 4x, and 133 MHz 2x transfer modes for AD and SBA signaling
* AGP v3.0 compliant with 8x transfer mode
* Pseudo-synchronous with the host CPU bus with optimal skew control
* Supports SideBand Addressing (SBA) mode (non-multiplexed address / data)
* AGP pipelined split-transaction long-burst transfers up to 1 GB/s
* Eight level read request queue
* Four level posted-write request queue
* Thirty-two level (quadwords) read data FIFO (256 bytes)
* Sixteen level (quadwords) write data FIFO (128 bytes)
* Intelligent request reordering for maximum AGP bus utilization
* Supports Flush / Fence commands
* Graphics Address Relocation Table (GART)
* One level TLB structure
* Sixteen entry fully associative page table
* LRU replacement scheme
* Independent GART lookup control for host / AGP / PCI master accesses
* Windows 95 OSR-2 VXD and integrated Windows 98 / Windows 2000 miniport driver support
Se preferite vi do il link per controllare le caratteristiche:
Information and Instructions - IMEDIA 2225 - PB13214506 - iMedia - platform_veloce_imedia - Desktop
Quello che vorrei fare sarebbe aumentare la scheda grafica , che ora ha solo 64mbdi memoria
Premettendo che piu di 512MB non voglio (credo che non esista di piu con questa interfaccia) e senza spendere una esagerazione, quale potrei mettere?
Io avevo pensato ad una PNYGeForce™ 6 6200 AGP8x 512MB
questa: http://www.pny.fr/products.php?section=product&categoryid=7&subcategoryid=63&productid=87
dite che va?
Ho un vecchio computer che sto cercando di rianimare... questo pc è del 2004 ed ha le seguenti caratteristiche:
Scheda madre Quasar2 (MS6786) KM400A ver 2.0
CPU AMD Sempron 2800+
Ram 1,43 GB DDR DRAM DIMM 168 pins
Scheda video della Via 3SG Unichrome IGP. Con slot AGP 4x 8x Full Featured Accelerated Graphics Port (AGP) Controller
* Supports 533 MHz 8x, 266 MHz 4x, and 133 MHz 2x transfer modes for AD and SBA signaling
* AGP v3.0 compliant with 8x transfer mode
* Pseudo-synchronous with the host CPU bus with optimal skew control
* Supports SideBand Addressing (SBA) mode (non-multiplexed address / data)
* AGP pipelined split-transaction long-burst transfers up to 1 GB/s
* Eight level read request queue
* Four level posted-write request queue
* Thirty-two level (quadwords) read data FIFO (256 bytes)
* Sixteen level (quadwords) write data FIFO (128 bytes)
* Intelligent request reordering for maximum AGP bus utilization
* Supports Flush / Fence commands
* Graphics Address Relocation Table (GART)
* One level TLB structure
* Sixteen entry fully associative page table
* LRU replacement scheme
* Independent GART lookup control for host / AGP / PCI master accesses
* Windows 95 OSR-2 VXD and integrated Windows 98 / Windows 2000 miniport driver support
Se preferite vi do il link per controllare le caratteristiche:
Information and Instructions - IMEDIA 2225 - PB13214506 - iMedia - platform_veloce_imedia - Desktop
Quello che vorrei fare sarebbe aumentare la scheda grafica , che ora ha solo 64mbdi memoria
Premettendo che piu di 512MB non voglio (credo che non esista di piu con questa interfaccia) e senza spendere una esagerazione, quale potrei mettere?
Io avevo pensato ad una PNYGeForce™ 6 6200 AGP8x 512MB
questa: http://www.pny.fr/products.php?section=product&categoryid=7&subcategoryid=63&productid=87
dite che va?