Notifier per Gmail

[masteryuri]

Sto cercando un buon notifier per gmail, qualcosa di semplice, funzionale e veloce.

Oltre a notificarmi le nuove mail dovrebbe anche darmi la possibilità di segnare un gruppo di email come "già lette" direttamente dalla tray.

In portage non ho trovato granché, e al momento sto provando
http://gmail-notify.sourceforge.net/
Ma non fa quello che cerco, e mi fa il login una volta si e 10 no.

[spacemarc]

quì (http://www.workswithu.com/2009/10/06/gmail-notifier-applets-for-ubuntu/) c'è una comparativa per Ubuntu ma dovrebbero funzionare anche con altre distro

[masteryuri]

Si quando usavo ubuntu ne provai diversi ed erano anche soddisfacenti, ora do uno sguardo.

[masteryuri]

Sto cercando di fare andare checkgmail ma mi da questi due warnings:
Warning: Crypt::Simple not found ...
Warning: Compress::Zlib not found ...
Ho provato con
root Desktop # perl -MCPAN -e 'install Crypt::Simple'
CPAN: Storable loaded ok
Going to read /root/.cpan/Metadata
Database was generated on Tue, 05 Jan 2010 22:39:44 GMT
CPAN: LWP::UserAgent loaded ok
Fetching with LWP:
ftp://ftp.perl.org/pub/CPAN/authors/01mailrc.txt.gz
Going to read /root/.cpan/sources/authors/01mailrc.txt.gz
Fetching with LWP:
ftp://ftp.perl.org/pub/CPAN/modules/02packages.details.txt.gz
Going to read /root/.cpan/sources/modules/02packages.details.txt.gz
Database was generated on Tue, 12 Jan 2010 13:41:54 GMT

There's a new CPAN.pm version (v1.9402) available!
[Current version is v1.7602]
You might want to try
install Bundle::CPAN
reload cpan
without quitting the current session. It should be a seamless upgrade
while we are running...

Fetching with LWP:
ftp://ftp.perl.org/pub/CPAN/modules/03modlist.data.gz
Going to read /root/.cpan/sources/modules/03modlist.data.gz
Going to write /root/.cpan/Metadata
Running install for module Crypt::Simple
Running make for K/KA/KASEI/Crypt-Simple-0.06.tar.gz
CPAN: Digest::MD5 loaded ok
Checksum for /root/.cpan/sources/authors/id/K/KA/KASEI/Crypt-Simple-0.06.tar.gz ok
Scanning cache /root/.cpan/build for sizes
Crypt-Simple-0.06/
Crypt-Simple-0.06/t/
Crypt-Simple-0.06/t/passphrase.t
Crypt-Simple-0.06/t/complex.t
Crypt-Simple-0.06/t/single.t
Crypt-Simple-0.06/t/file.t
Crypt-Simple-0.06/t/multi.t
Crypt-Simple-0.06/t/passfile.t
Crypt-Simple-0.06/README
Crypt-Simple-0.06/Simple.pm
Crypt-Simple-0.06/Makefile.PL
Crypt-Simple-0.06/MANIFEST
Removing previously used /root/.cpan/build/Crypt-Simple-0.06

CPAN.pm: Going to build K/KA/KASEI/Crypt-Simple-0.06.tar.gz

Checking if your kit is complete...
Looks good
Warning: prerequisite Compress::Zlib 1.11 not found.
Writing Makefile for Crypt::Simple
cp Simple.pm blib/lib/Crypt/Simple.pm
Manifying blib/man3/Crypt::Simple.3pm
/usr/bin/make -- OK
Running make test
PERL_DL_NONLAZY=1 /usr/bin/perl5.8.8 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/complex.t ..... Can't locate Compress/Raw/Zlib.pm in @INC (@INC contains: /root/.cpan/build/Crypt-Simple-0.06/blib/lib /root/.cpan/build/Crypt-Simple-0.06/blib/arch /etc/perl /usr/lib/perl5/vendor_perl/5.8.8/i686-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl /usr/lib/perl5/site_perl/5.8.8/i686-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl /usr/lib/perl5/5.8.8/i686-linux-thread-multi /usr/lib/perl5/5.8.8 /usr/local/lib/site_perl .) at /usr/lib/perl5/vendor_perl/5.8.8/Compress/Zlib.pm line 12.
BEGIN failed--compilation aborted at /usr/lib/perl5/vendor_perl/5.8.8/Compress/Zlib.pm line 12.
Compilation failed in require at /root/.cpan/build/Crypt-Simple-0.06/blib/lib/Crypt/Simple.pm line 105.
BEGIN failed--compilation aborted at /root/.cpan/build/Crypt-Simple-0.06/blib/lib/Crypt/Simple.pm line 105.
Compilation failed in require at t/complex.t line 7.
BEGIN failed--compilation aborted at t/complex.t line 7.
t/complex.t ..... Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
t/file.t ........ 1/6
# Failed test 'require Crypt::Simple;'
# at t/file.t line 30.
# Tried to require 'Crypt::Simple'.
# Error: Can't locate Compress/Raw/Zlib.pm in @INC (@INC contains: /root/.cpan/build/Crypt-Simple-0.06/blib/lib /root/.cpan/build/Crypt-Simple-0.06/blib/arch /etc/perl /usr/lib/perl5/vendor_perl/5.8.8/i686-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl /usr/lib/perl5/site_perl/5.8.8/i686-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl /usr/lib/perl5/5.8.8/i686-linux-thread-multi /usr/lib/perl5/5.8.8 /usr/local/lib/site_perl .) at /usr/lib/perl5/vendor_perl/5.8.8/Compress/Zlib.pm line 12.
# BEGIN failed--compilation aborted at /usr/lib/perl5/vendor_perl/5.8.8/Compress/Zlib.pm line 12.
# Compilation failed in require at /root/.cpan/build/Crypt-Simple-0.06/blib/lib/Crypt/Simple.pm line 105.
# BEGIN failed--compilation aborted at /root/.cpan/build/Crypt-Simple-0.06/blib/lib/Crypt/Simple.pm line 105.
# Compilation failed in require at (eval 4) line 2.
Undefined subroutine &Foo::encrypt called at t/file.t line 48.
# Looks like you planned 6 tests but ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test exited with 25 just after 1.
t/file.t ........ Dubious, test returned 25 (wstat 6400, 0x1900)
Failed 6/6 subtests
t/multi.t ....... Can't locate Compress/Raw/Zlib.pm in @INC (@INC contains: /root/.cpan/build/Crypt-Simple-0.06/blib/lib /root/.cpan/build/Crypt-Simple-0.06/blib/arch /etc/perl /usr/lib/perl5/vendor_perl/5.8.8/i686-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl /usr/lib/perl5/site_perl/5.8.8/i686-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl /usr/lib/perl5/5.8.8/i686-linux-thread-multi /usr/lib/perl5/5.8.8 /usr/local/lib/site_perl .) at /usr/lib/perl5/vendor_perl/5.8.8/Compress/Zlib.pm line 12.
BEGIN failed--compilation aborted at /usr/lib/perl5/vendor_perl/5.8.8/Compress/Zlib.pm line 12.
Compilation failed in require at /root/.cpan/build/Crypt-Simple-0.06/blib/lib/Crypt/Simple.pm line 105.
BEGIN failed--compilation aborted at /root/.cpan/build/Crypt-Simple-0.06/blib/lib/Crypt/Simple.pm line 105.
Compilation failed in require at t/multi.t line 7.
BEGIN failed--compilation aborted at t/multi.t line 7.
t/multi.t ....... Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
t/passfile.t .... 1/6
# Failed test 'require Crypt::Simple;'
# at t/passfile.t line 30.
# Tried to require 'Crypt::Simple'.
# Error: Can't locate Compress/Raw/Zlib.pm in @INC (@INC contains: /root/.cpan/build/Crypt-Simple-0.06/blib/lib /root/.cpan/build/Crypt-Simple-0.06/blib/arch /etc/perl /usr/lib/perl5/vendor_perl/5.8.8/i686-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl /usr/lib/perl5/site_perl/5.8.8/i686-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl /usr/lib/perl5/5.8.8/i686-linux-thread-multi /usr/lib/perl5/5.8.8 /usr/local/lib/site_perl .) at /usr/lib/perl5/vendor_perl/5.8.8/Compress/Zlib.pm line 12.
# BEGIN failed--compilation aborted at /usr/lib/perl5/vendor_perl/5.8.8/Compress/Zlib.pm line 12.
# Compilation failed in require at /root/.cpan/build/Crypt-Simple-0.06/blib/lib/Crypt/Simple.pm line 105.
# BEGIN failed--compilation aborted at /root/.cpan/build/Crypt-Simple-0.06/blib/lib/Crypt/Simple.pm line 105.
# Compilation failed in require at (eval 4) line 2.
Undefined subroutine &Foo::encrypt called at t/passfile.t line 48.
# Looks like you planned 6 tests but ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test exited with 25 just after 1.
t/passfile.t .... Dubious, test returned 25 (wstat 6400, 0x1900)
Failed 6/6 subtests
t/passphrase.t .. 1/6
# Failed test 'require Crypt::Simple;'
# at t/passphrase.t line 18.
# Tried to require 'Crypt::Simple'.
# Error: Can't locate Compress/Raw/Zlib.pm in @INC (@INC contains: /root/.cpan/build/Crypt-Simple-0.06/blib/lib /root/.cpan/build/Crypt-Simple-0.06/blib/arch /etc/perl /usr/lib/perl5/vendor_perl/5.8.8/i686-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl /usr/lib/perl5/site_perl/5.8.8/i686-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl /usr/lib/perl5/5.8.8/i686-linux-thread-multi /usr/lib/perl5/5.8.8 /usr/local/lib/site_perl .) at /usr/lib/perl5/vendor_perl/5.8.8/Compress/Zlib.pm line 12.
# BEGIN failed--compilation aborted at /usr/lib/perl5/vendor_perl/5.8.8/Compress/Zlib.pm line 12.
# Compilation failed in require at /root/.cpan/build/Crypt-Simple-0.06/blib/lib/Crypt/Simple.pm line 105.
# BEGIN failed--compilation aborted at /root/.cpan/build/Crypt-Simple-0.06/blib/lib/Crypt/Simple.pm line 105.
# Compilation failed in require at (eval 4) line 2.
Undefined subroutine &Foo::encrypt called at t/passphrase.t line 36.
# Looks like you planned 6 tests but ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test exited with 255 just after 1.
t/passphrase.t .. Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 6/6 subtests
t/single.t ...... Can't locate Compress/Raw/Zlib.pm in @INC (@INC contains: /root/.cpan/build/Crypt-Simple-0.06/blib/lib /root/.cpan/build/Crypt-Simple-0.06/blib/arch /etc/perl /usr/lib/perl5/vendor_perl/5.8.8/i686-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl /usr/lib/perl5/site_perl/5.8.8/i686-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl /usr/lib/perl5/5.8.8/i686-linux-thread-multi /usr/lib/perl5/5.8.8 /usr/local/lib/site_perl .) at /usr/lib/perl5/vendor_perl/5.8.8/Compress/Zlib.pm line 12.
BEGIN failed--compilation aborted at /usr/lib/perl5/vendor_perl/5.8.8/Compress/Zlib.pm line 12.
Compilation failed in require at /root/.cpan/build/Crypt-Simple-0.06/blib/lib/Crypt/Simple.pm line 105.
BEGIN failed--compilation aborted at /root/.cpan/build/Crypt-Simple-0.06/blib/lib/Crypt/Simple.pm line 105.
Compilation failed in require at t/single.t line 7.
BEGIN failed--compilation aborted at t/single.t line 7.
t/single.t ...... Dubious, test returned 2 (wstat 512, 0x200)
No subtests run

Test Summary Report
-------------------
t/complex.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/file.t (Wstat: 6400 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 25
Parse errors: Bad plan. You planned 6 tests but ran 1.
t/multi.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/passfile.t (Wstat: 6400 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 25
Parse errors: Bad plan. You planned 6 tests but ran 1.
t/passphrase.t (Wstat: 65280 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 255
Parse errors: Bad plan. You planned 6 tests but ran 1.
t/single.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
Files=6, Tests=3, 1 wallclock secs ( 0.07 usr 0.02 sys + 0.39 cusr 0.07 csys = 0.55 CPU)
Result: FAIL
Failed 6/6 test programs. 3/3 subtests failed.
make: *** [test_dynamic] Error 2
/usr/bin/make test -- NOT OK
Running make install
make test had returned bad status, won't install without force


E

root Desktop # perl -MCPAN -e 'install Compress::Zlib'
Can't locate object method "install" via package "Compress::Zlib" at -e line 1.


Quindi niente...

[masteryuri]

Una qualche soluzione?

[Chiancheri]

non ti basta avviare evolution al login e configurare evolution per quello? Se non sbaglio evolution dovrebbe integrarsi al massimo. Poi ovviamente ci sono ogni tipo di soluzione. Non so consigliartene perchè io uso semplicemete un addon su chromium che fa proprio quello (anche perchè nel mio caso se il pc è acceso, allora ho sicuramete il rowser aperto).

[Dcromato]

cgmail?
mail-notification?


chiedo scusa gia sottoposti

[masteryuri]

Va beh vada per estensione firefox.