DavideIerva92
10-01-2010, 12:09
Salve a tutti, vorrei overcloccare il mio Q6600 su una Asus P5Q-Deluxe. Ho visto nel BIOS che ci sono moltissimi valori che si possono modificare per L'OC, e io non so quali toccare...
Ho già visto il Thread Ufficiale di questa scheda madre: http://www.hwupgrade.it/forum/showthread.php?t=1809656&page=1
Ma di tutti questi valori, io non so quali toccare:
AI Overclock tuner: Manual
CPU Ratio Setting:
FSB Frequency:
PCI-E Frequency: 101
FSB Strap to North Bridge: Auto
DRAM Frequency:
DRAM CLK Skew on Channel A1: AUTO
DRAM CLK Skew on Channel A2: AUTO
DRAM CLK Skew on Channel B1: AUTO
DRAM CLK Skew on Channel B2: AUTO
DRAM Timing Control: Manual
1st Information:
CAS# Latency:
DRAM RAS# to CAS# Delay:
DRAM RAS# Precharge:
DRAM RAS# Activate to Precharge:
RAS# to RAS# Delay : AUTO
Row Refresh Cycle Time: AUTO
Write Recovery Time: AUTO
Read to Precharge Time: AUTO
2nd Information :
READ to WRITE Delay (S/D): AUTO
Write to Read Delay (S): AUTO
WRITE to READ Delay (D): AUTO
READ to READ Delay (S): AUTO
READ to READ Delay (D): AUTO
WRITE to WRITE Delay (S): AUTO
WRITE to WRITE Delay (D): AUTO
3rd Information :
WRITE to PRE Delay: AUTO
READ to PRE Delay: AUTO
PRE to PRE Delay: AUTO
ALL PRE to ACT Delay: AUTO
ALL PRE to REF Delay: AUTO
DRAM Static Read Control: auto
DRAM Read Training: Auto
MEM. OC Charger: Auto
AI Clock Twister: Auto
AI Transaction Booster: Auto
CPU Voltage:
CPU GTL Voltage Reference (0/2):
CPU GTL Voltage Reference (1/3):
CPU PLL Voltage:
FSB Termination Voltage:
NB Voltage:
DRAM Voltage:
NB GTL Reference:
SBridge Voltage:
PCIE SATA Voltage:
Load Line Calibration: Enabled
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
CPU Clock Skew: Auto
NB Clock Skew: Auto
CPU Margin Enhancement: Optimized
Altre caratteristiche del mio PC: Q6600 2,4Ghz, Asus P5Q-Deluxe, Corsair 8500C5D 4GB 1066Mhz (se possibile, portarle a 1200); Dissi: Asus Triton 70.
Temperatura CPU idle: 9-10°
Nvidia GeForce 9800GX2
Ringrazio in anticipo chi mi può dare una mano...
Ho già visto il Thread Ufficiale di questa scheda madre: http://www.hwupgrade.it/forum/showthread.php?t=1809656&page=1
Ma di tutti questi valori, io non so quali toccare:
AI Overclock tuner: Manual
CPU Ratio Setting:
FSB Frequency:
PCI-E Frequency: 101
FSB Strap to North Bridge: Auto
DRAM Frequency:
DRAM CLK Skew on Channel A1: AUTO
DRAM CLK Skew on Channel A2: AUTO
DRAM CLK Skew on Channel B1: AUTO
DRAM CLK Skew on Channel B2: AUTO
DRAM Timing Control: Manual
1st Information:
CAS# Latency:
DRAM RAS# to CAS# Delay:
DRAM RAS# Precharge:
DRAM RAS# Activate to Precharge:
RAS# to RAS# Delay : AUTO
Row Refresh Cycle Time: AUTO
Write Recovery Time: AUTO
Read to Precharge Time: AUTO
2nd Information :
READ to WRITE Delay (S/D): AUTO
Write to Read Delay (S): AUTO
WRITE to READ Delay (D): AUTO
READ to READ Delay (S): AUTO
READ to READ Delay (D): AUTO
WRITE to WRITE Delay (S): AUTO
WRITE to WRITE Delay (D): AUTO
3rd Information :
WRITE to PRE Delay: AUTO
READ to PRE Delay: AUTO
PRE to PRE Delay: AUTO
ALL PRE to ACT Delay: AUTO
ALL PRE to REF Delay: AUTO
DRAM Static Read Control: auto
DRAM Read Training: Auto
MEM. OC Charger: Auto
AI Clock Twister: Auto
AI Transaction Booster: Auto
CPU Voltage:
CPU GTL Voltage Reference (0/2):
CPU GTL Voltage Reference (1/3):
CPU PLL Voltage:
FSB Termination Voltage:
NB Voltage:
DRAM Voltage:
NB GTL Reference:
SBridge Voltage:
PCIE SATA Voltage:
Load Line Calibration: Enabled
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
CPU Clock Skew: Auto
NB Clock Skew: Auto
CPU Margin Enhancement: Optimized
Altre caratteristiche del mio PC: Q6600 2,4Ghz, Asus P5Q-Deluxe, Corsair 8500C5D 4GB 1066Mhz (se possibile, portarle a 1200); Dissi: Asus Triton 70.
Temperatura CPU idle: 9-10°
Nvidia GeForce 9800GX2
Ringrazio in anticipo chi mi può dare una mano...