Problema disco illegale

[Beppe Tunz]

Ciao a tutti!Sono Beppe,ho 28 anni e abito nel freddo nord Italia.
Ho un problema di cui non trovo soluzione.Ho girato tra vari forum e questo mi sembra il migliore!
Cercherò di esporvelo nel miglior modo possibile.

Ho acquistato dei dvd-r 16x della Memorex.Marca che uso da anni e mi sono sempre trovato bene.Ho aperto la confezione,prendo un dvd,provo a masterizzarlo e mi appare scritto
"Disco illegale F: TDK DVDRW1616N non è possibile utilizzare Disc at Once scrittura fallita a 8x".
Non demordo.Provo un altro dvd e mi da lo stesso errore e così per altre tre volte.
Comincio a girare sul net alla ricerca di una soluzione.Aggiornamento firmware del masterizzatore(fatto).Altre marche di dvd(fatto ma ho sempre usato Memorex.Casualmente ho trovato dei Sony e funzionavano)Aggiornamento del sistema(è sempre aggiornato)Guardare se i canali Ide erano a posto(fatto).Insomma...Le ho provate tutte!Sono disperato perchè ho preso 200 dvd e non vorrei gettarli via tutti!
Vi lascio anche il log dell'errore.
Il masterizzatore è un TDK DVDRW1616N.Il s.o. è Win Xp Professional sp3.Il software che uso per masterizzare è Nero 7.11.10.1 ultra edition.
Ringrazio tutti coloro che mi aiuteranno a trovare una soluzione!
Ah...dimenticavo!Il log!

Beppe

1C82-0000-19E5-MAAX-4008-8429-****

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.11.10.0
Internal Version: 7, 11, 10, 0

Recorder: <TDK DVDRW1616N> Version: 2.79 - HA 1 TA 0 - 7.11.10.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <TDK DVDRW1616N >Version: 2.79 - HA 1 TA 0 - 7.11.10.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : TDK DVDRW1616N atapi Port 4 ID 0 DMA: On
DiskPeripheral : Maxtor 6B200P0 atapi Port 5 ID 0 DMA: On
DiskPeripheral : ST3300822A atapi Port 5 ID 1 DMA: On
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 6 ID 0 DMA: Off

=== CDRom-Device-Map ===
TDK DVDRW1616N F: CdRom0
SCSIVAX DVD/CD-ROM H: CdRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1022MB (1046956kB)
Free physical memory: 542MB (555052kB)
Memory in use : 46 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

21.12.2009
Compilation ISO
12.14.11 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

12.14.11 #2 Text 0 File Isodoc.cpp, Line 6711
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

12.14.11 #3 ISO9660GEN -11 File Geniso.cpp, Line 3350
First writeable address = 0 (0x00000000)

12.14.11 #4 Text 0 File Burncd.cpp, Line 3500
Turn on Disc-At-Once, using DVD media

12.14.11 #5 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorDVD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'

12.14.11 #6 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2175087 (483:21.12, 4248MB)

12.14.11 #7 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

12.14.11 #8 Text 0 File DlgWaitCD.cpp, Line 2988
Recorder: TDK DVDRW1616N, Media type: DVD-R
Disc Manufacturer ID: <MBI 01> <RG40>
Disc Application Code: 64, Disc Physical Code: 193

12.14.11 #9 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12.14.11 #10 Text 0 File ThreadedTransferInterface.cpp, Line 778
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2175088 (2175088) = #2175088/483:21.13
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2175088 blocks [F: TDK DVDRW1616N]
--------------------------------------------------------------

12.14.11 #11 Text 0 File ThreadedTransferInterface.cpp, Line 979
Prepare [F: TDK DVDRW1616N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4454580224, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2175088 | 0 | 0x00
2175088 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

12.14.11 #12 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

12.14.11 #13 Text 0 File Burncd.cpp, Line 4286
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

12.14.11 #14 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started

12.14.11 #15 Text 0 File Burncd.cpp, Line 4405
Cache writing successful.

12.14.11 #16 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed

12.14.12 #17 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 8x (11.080 KB/s)

12.14.12 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2726
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

12.14.12 #19 Text 0 File DVDR.cpp, Line 3262
Recording mode: Sequential Recording Mode

12.14.12 #20 Text 0 File DVDR.cpp, Line 3416
Start write address at LBA 0
DVD high compatibility mode: Yes

12.14.12 #21 Text 0 File Cdrdrv.cpp, Line 10161
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
Outer Limit of Data Recordable Area: 26127F h
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0, Extended part version: 33
Start PSN of the Extra Border Zone: 2FE10 h
Start PSN of Physical format information blocks in Extra Border Zone: 2FFA0 h
Media Specific [16..783]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01 40 C1 FD 9E D8 52 00 - 02 85 0D 10 88 9A 80 00 .@....R.........
03 4D 42 49 20 30 31 00 - 04 52 47 34 30 00 00 00 .MBI.01..RG40...
05 88 80 00 00 00 02 00 - 06 09 0D 13 87 78 80 00 .............x..
07 88 80 00 00 00 00 00 - 08 05 15 0D 10 0B 0A 00 ................
09 98 08 0F 0B 78 88 00 - 0A 80 00 00 00 00 10 00 .....x..........
0B 07 19 15 A7 88 75 00 - 0C 99 BC AA A2 20 22 00 ......u.......".
0D 00 00 D0 00 00 00 00 - 0E 09 25 33 2F 29 1E 00 ..........%3/)..
0F 50 21 2D 1F 9A B6 00 - 10 88 84 00 04 00 04 00 .P!-............
11 00 00 00 00 00 00 00 - 12 09 2F 37 2F 29 1E 00 ........../7/)..
13 50 1F 2D 1F 9A B6 00 - 14 88 C4 00 04 00 04 00 .P.-............
15 00 00 00 00 00 00 00 - 16 0B 3F 33 2F 29 1E 00 ..........?3/)..
17 50 21 2D 1F 9A B6 00 - 18 88 84 00 04 00 04 00 .P!-............
19 00 00 00 00 00 00 00 - 1A 0B 51 37 2F 29 1E 00 ..........Q7/)..
1B 50 1F 2D 1F 9A B6 00 - 1C 88 C4 00 04 00 04 00 .P.-............
1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

12.14.12 #22 SPTI -1046 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 00 00 00 00 00 21 30 70 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05

12.14.12 #23 CDR -1046 File ThreadedTransferInterface.cpp, Line 1733
Illegal disc
F: TDK DVDRW1616N

12.14.12 #24 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1733
Could not perform start of Disc-at-once

12.14.12 #25 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 83836800

12.14.12 #26 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 8x (11.080 KB/s)

12.14.12 #27 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

12.14.14 #28 Text 0 File Cdrdrv.cpp, Line 11411
DriveLocker: UnLockVolume completed

12.14.14 #29 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[Perseverance]

Puoi controllare se il MediaID (Manufacturer) dei DVD che hai acquistato è lo stesso di quelli che avevi in passato masterizzato con successo?

Se hai nero dovresti avere nero cd\dvd speed. Te lo dice lì il media ID del disco. Se sono differenti è probabile che non siano compatibili in scrittura in modalità DAO col tuo masterizzatore, tenta la scrittura in TAO (Track Ad Once).

Altrimenti prova a masterizzare con una distribuzione linux, il software è di solito brasero o k3b.

[Beppe Tunz]

Ho provato a vedere se potevo metterlo in TAO ma non mi permette di farlo..In teoria i dvd dovrebbero essere gli stessi perchè li ho comprati dallo stesso fornitore...

[Perseverance]

Il MEDIA_ID ti dice se sono gli stessi, non la locandina del venditore. Se è un venditore serio di supporti ottici dovrebbe scrivere per esteso il media id del supporto che vende!

Li hai provati su un altro masterizzatore?
99/100 è il firmware del masterizzatore da aggiornare. Secondo me hanno cambiato mediaid, quindi sono differenti ed il masterizzatore non riesce a capire come calibrare il laser per scriverci.

[Beppe Tunz]

forse faccio prima a buttare masterizzatore e prenderne uno nuovo...

[Beppe Tunz]

cd - dvd speed non me li legge..Mi da errore!

[Perseverance]

Strano, se vai in "info disc" (o qualcosa di simile) te lo dovrebbe dire, addirittura ti dovrebbe comparire tutte le informazioni esadecimali del supporto. Deve essere vecchio per non supportare queste cose!

[Beppe Tunz]

mi sa che è vecchiotto..Ho provato a masterizzare il dvd con un'altro masterizzatore e non ha dato nessun problema..Soluzione:devo acquistare un nuovo masterizzatore.
Grazie comunque e buone feste!