PDA

View Full Version : [PR+sped] Vendo Enermax noisetaker 2 600w


dovo
21-05-2009, 09:27
Come da titolo vendo Enermax Noisetaker 2 da 600w, l'alimentatore monta uno sleeving kit nero fatto da me, e connettori neri invece degli originali bianchi, ul connettore scheda madre originale non è stato smontto, nella spedizione ne allego anche uno nero per chi vuole cambiarlo.
supporta lo sli.

prezzo 60 euro+ s.s---> spedizione compresa!!!---> 55 euro spedizione compresa!!

pagamento postepay o bonifico.


http://www.pctunerup.com/up/results/_200905/th_20090521102750_CIMG3544.JPG (http://www.pctunerup.com/up/image.php?src=_200905/20090521102750_CIMG3544.JPG)
http://www.pctunerup.com/up/results/_200905/th_20090521102819_CIMG3545.JPG (http://www.pctunerup.com/up/image.php?src=_200905/20090521102819_CIMG3545.JPG)

vick_nait
21-05-2009, 09:32
coda..intanto mi informo.
vick

vick_nait
21-05-2009, 09:37
ne trovo solo uno sul trovaprezzi.potresti darmi un link dell'ali?scontrino..garanzia e anno di acquisto?è completo di tutto?
vick

dovo
21-05-2009, 09:47
http://www.pctuner.net/articoli/alimentatori/410/Enermax-NoiseTaker-II-485W/

il mio è il modello superiore

oppure questa in inglese

http://www.pureoverclock.com/review.php?id=8


allego scheda tecnica:

- Specifications :

Rails
EG701AX-VE SFMA

+12v1
18A
35A
combined power

+12v2
18A

-12v
0.8A

+5v
45A

+5v sb
2.5A

+3.3v
36A




Maximum Power: 600W (support both 20pins and 24pins DUAL CPU motherboards)
Efficiency: 80%
Active PFC: Yes
Input Voltage: 90V~265V (Auto Adjusted)
Input Frequency Range: 47Hz~63Hz
Input Current: 40A/115V and 80A/230V max. during cold start
Hold up time: 17ms at 115VAC or 230VAC, full load
Over Voltage Protection: +5V: 5.5V~7.0V; +3.3V:3.76V~4.3V; +12V & +12V2: 13.4V~15.6V
Over Load Protection: 110~160% of max load
Over current Protection: +3.3V : 55A (max); +5V: 48A (max); +12V1 & +12V2: 20A (max)
Over Temperature Protection: Operating Ambient 10ºC~40ºC, Storage Ambient -40ºC~70ºC
Humidity:
Operating : to 85% relative humidity, non condensing at 25ºC
Storage: to 95% relative humidity, non condensing at 50ºC
MTBF: Greater than 100K hours at 70% of full rated load; 230VAC / 50Hz input; 25ºC ambient
EMC: EN55022 Class B, EN61000-4-2 Class B, EN61000-4-3 Class A, EN61000-4-4 Class B, EN61000-4-5 Class B, EN61000-4-6 Class A, EN61000-4-8 Class A, EN61000-4-11 Class B, FCC Part 15 & Part 2, CNS 13438 Class B
Safety: Approval UL, cUL, TÜV, CB
Dimension: W150 x H86 x D140 (mm)

- Pin layout :
20+4 Pins Main Power: 1 (support 24P and 20P MB)
P4 +12V (8pins) CPU : 1
6 Pins PCI Express : 2
Serial ATA : 4
HDD Power :7
FDD Power : 2
Fan Monitor: 1





- Features :

- smart fan function


The Smart Fan technology was developed by the folks at Enermax to protect your investment. After your system shutdown, the two ball bearing fans continue to run for another 2 mins to cool off your power supply and components . It also has a heat sensor that will allow the fans to run for more then 2 mins if the temp is greater then 40c after the 2 min. This will greatly increase the life your power supply and components.



- dual +12V Rails


Independent 12V rails supply to MB/CPU and drives in order to provide stable and clean current to noise-sensitive devices, such as: CPU, add-on cards. Meet UL 240VA safety requirements. It also separate the motherboard rails and video card rails to ensure maximum power to your PCI Express video card.



- high efficiency (80%)


High efficiency is achieve by using using high quality components and the skills of our designer to maximizes your power supply output and minimize wasted power. Efficiency is the measure of how much of the 100% power going in to the PSU is being used up and the unused power dissipate into heat through the heatsink. Lower efficiency means that more power is being wasted and also the PSU will generate more heat. .



- ring core technology


Effectively prevents electro-magnetic pulse leaking from switching power supply to appliances that are being attached to the same power source, i.e. AC wall plug..



- protection


Enermax has one of the highest protection standard on the market today, due to our advance design we offer the following type of protections:

OCP -Over Current Protection, UCP -Under Current Protection, OVP - Over Voltage Protection, OLP -Over Load Protection, OTP - Over Temperature Protection, SCP - Short Circuits Protection.




“ Enermax Noisetaker 600W - EG701AX

Power PC's are becoming very popular as many people are realising the true power of the PC over the consoles for gaming. But If you are running a power system then you will need a Powerful Power Supply Unit to keep it all running. Here we have the latest offering from Enermax, the Noisetaker EG701AX. This power supply looks after itself as well as looking after the rest of your components. This PSU has every connector you need for all the latest technology including S-ATA, P4 Prescott boards and PCI-express. Packed full of features the Enermax Noisetaker series are PSU's for the serious PC gamer or power user.

Dual Smart Fan

Like I have just mentioned above the EG701AX is cooled with 2 fans for better all round cooling. Both of these fans are on a system called Smart Fan. Essentially what smart fan does is keep the fans running after the the PC has been switched off. The fans will continue to run for at least 2 minutes after shut down in order to effectively cool the components inside the PSU, this prolongs the life of your power supply and keeps performance at an optimum. The Dual fan helps to keep the noise down inside your case. With two fans circulating the air at a lower rpm, your PSU gets a good cooling solution without the need for ear plugs. If you have ever tried watching a DVD on your computer and have noisy fans inside your case, then you will now the importance of keeping the volume down. Also this better circulation will slow down any build up of dust that may reduce performance. As an added bonus, these two fans will help the overall circulation inside your case.



Separate 12V Rails

Separate 12v rails for your motherboard, CPU and drives in order to produce a stable system especially to noise sensitive devices like your CPU and add on cards.



Compatibility

The Enermax Noisetaker EG701AX is compatible with a wide range of motherboards and CPU's. This Power supply unit can be used with standard ATX boards, Athlon 64/FX boards and CPU's, Pentium for platforms including the latest Prescott, and motherboards that use 875 and 865 chipsets. Plus next gen CPU and chipset support like the 925 and 915 from Intel.



Feature List

· ATX 12v compatible

· Smart Fan

· Dual fan

· Separate 12v rails

· S-ATA connectors

· Manual and Auto fan

· High circuit reliability

· Ring Core

· Active PFC Function

· Fan Monitor

· Low acoustic noise

Connectors

The Enermax EG701AX Power supply unit comes with the following connectors

1 x 24pin ATX power connector
1 x 6pin PCI express connector
1 x 4pin Intel processor connector
4 x S-ATA Connectors
2 x Standard floppy connectors
7 x Standard 4pin power connectors

There should be enough in this package to house even the most power hungry of users.
Overall we are looking at a very high quality power supply. I would urge you that if you are planning on building a new system with loads of drives or especially if you have a gaming system with a Graphics card that needs an extra power connector, then its well worth safeguarding these components by buying a power supply that can handle it, and the EG701AX from Enermax can handle it easily. “

dovo
21-05-2009, 09:49
la scatola è stata buttata da mia madre :mad:
l'alimentatore ha circa 2 anni e mezzo, e non ha più la garanzia.

vick_nait
21-05-2009, 10:56
dovo, scusmi, mi sono sccorto ora che non è un modulare.
coda libera.
vick

dovo
23-05-2009, 17:59
up!

dovo
24-05-2009, 09:28
up!

dovo
25-05-2009, 10:25
up!

dovo
25-05-2009, 19:13
aggiornato il prezzo a 60 euro spedizione compresa!

dovo
29-05-2009, 07:36
up!

dovo
01-06-2009, 15:54
a nessuno interessa questo alimentatore??

dovo
03-06-2009, 10:57
up...aggiorno il prezzo a 55euro spese comprese!

dovo
15-06-2009, 14:23
ancora disponibile!!

dovo
16-06-2009, 11:15
up!

..::Gianlu::..
16-06-2009, 13:37
quindi in totale sono 36 amper?
ma per una p4p800e deluxe andrebbe bene? come faccio con tutti gli attacchi molex?
ciauz

dovo
16-06-2009, 16:00
in totale sono 35A...non vedo perchè non dovrebbe andare bene sulla tua scheda madre! ;)

dovo
17-06-2009, 15:17
e up!

..::Gianlu::..
17-06-2009, 16:45
ti ho scritto in pvt

dovo
17-06-2009, 21:44
risposto :)

exces
20-06-2009, 14:29
ciao
coda a 50 spedito

dovo
22-06-2009, 15:43
scusami non ho visto la tua offerta! :mc:

ti interessa ancora?

m4dbra1n
22-06-2009, 22:21
forse interessa a me :D

tengo d'occhio il thread ;)

dovo
23-06-2009, 16:43
uppino...si sa mai :D

exces
23-06-2009, 21:25
scusami non ho visto la tua offerta! :mc:

ti interessa ancora?

no
mi spiace...
buona vendita ;)

minutemide87
24-06-2009, 19:34
Coda
Fammi sapere in pvt per concludere

dovo
25-06-2009, 09:15
hai pvt