dino.c1979
04-05-2009, 20:32
:D Ciao Raga...avrei bisogno di alcune delucidazioni...
Possiedo queste Ramm DDR3 Corsair Dominator DHX 2000 Ghz..ma nel mio Hardware in firma sono settate a 1600 altrimenti il sistema Crasha all'avvio di Windows oppure STOP con Orthos...
Ho provato QUASI in tutti i modi ma non riesco ad arrivare neanche a 1800...
qualcuno può aiutarmi al riguardo se sono proprio queste RAM che non possono salire???
Oppure può essere qualche settaggio impostato male?
Non dico arrivare a 2000 sarebbe un sogno,ma almeno arrivare a 1800!
Comunque sono a 1600 con i timing originali 9-9-9-24...
La mia configurazione da BIOS è questa:
Ai Overclock Tuner: manual
Oc from cpu level: Auto
Oc from memory level: Auto
FSB frequency: 400
Cpu Ratio setting: 10
Cpu clock Skew: auto
NB Clock Skew: auto
FSB Strap to North bridge: 333
PCIE frequency: 101
Dram Frequency: 1601
Dram Command Rate: 2T
Dram timing control: Manual
Cas Latency: 9
Ras to Cas Delay: 9
Ras pre Time: 9
Ras Act Time: 24
Ras to Ras Delay: Auto
Ref Cycle Time: Auto
Write Recovery Time Auto
Read to Pre Time: Auto
Read to Write Delay (SD): Auto
Write to Read Delay(S): Auto
Write to Read Delay(D): Auto
Read to Read Delay (S): Auto
Read to Read Delay (D): Auto
Write to Write Delay(S): Auto
Write to Write Delay(D): Auto
Write to Pre Delay: Auto
Read to Pre Delay: Auto
Pre to Pre Delay: Auto
All Pre to Act Delay: Auto
All Pre to REF Delay: Auto
Dram Static Read control: auto
Dram Dynamic Write control: auto
Dram Skew Control
Ai Clock Twister: auto
Ai Transaction Booster: auto
EPU II Phase control: auto
Cpu voltage: auto
Load Line Calibration: auto
CPU PLL Voltage: auto
FSB Termination Voltage: auto
CPU GTLVref(0): Auto
CPU GTLVref(1): Auto
CPU GTLVref(2): Auto
CPU GTLVref(3): Auto
NB GTLVref: Auto
North Bridge voltage: auto
Dram Voltage: 1,90 (come da Costruttore)
NB DDR Vref: auto
DDR3 ChannelA Vref: Auto
DDR3 ChannelB Vref: Auto
South Bridge auto
South Bridge auto
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
Configure Advanced CPU setting
Cpu ratio setting: 10
C1E support: Disabled
CPU TM function: Disabled
Max CPUID value limit: Disabled
Vanderpool Technology: Disabled
Execute Disable bit: Disabled
Core Multi-Processing: Enabled :mc:
Possiedo queste Ramm DDR3 Corsair Dominator DHX 2000 Ghz..ma nel mio Hardware in firma sono settate a 1600 altrimenti il sistema Crasha all'avvio di Windows oppure STOP con Orthos...
Ho provato QUASI in tutti i modi ma non riesco ad arrivare neanche a 1800...
qualcuno può aiutarmi al riguardo se sono proprio queste RAM che non possono salire???
Oppure può essere qualche settaggio impostato male?
Non dico arrivare a 2000 sarebbe un sogno,ma almeno arrivare a 1800!
Comunque sono a 1600 con i timing originali 9-9-9-24...
La mia configurazione da BIOS è questa:
Ai Overclock Tuner: manual
Oc from cpu level: Auto
Oc from memory level: Auto
FSB frequency: 400
Cpu Ratio setting: 10
Cpu clock Skew: auto
NB Clock Skew: auto
FSB Strap to North bridge: 333
PCIE frequency: 101
Dram Frequency: 1601
Dram Command Rate: 2T
Dram timing control: Manual
Cas Latency: 9
Ras to Cas Delay: 9
Ras pre Time: 9
Ras Act Time: 24
Ras to Ras Delay: Auto
Ref Cycle Time: Auto
Write Recovery Time Auto
Read to Pre Time: Auto
Read to Write Delay (SD): Auto
Write to Read Delay(S): Auto
Write to Read Delay(D): Auto
Read to Read Delay (S): Auto
Read to Read Delay (D): Auto
Write to Write Delay(S): Auto
Write to Write Delay(D): Auto
Write to Pre Delay: Auto
Read to Pre Delay: Auto
Pre to Pre Delay: Auto
All Pre to Act Delay: Auto
All Pre to REF Delay: Auto
Dram Static Read control: auto
Dram Dynamic Write control: auto
Dram Skew Control
Ai Clock Twister: auto
Ai Transaction Booster: auto
EPU II Phase control: auto
Cpu voltage: auto
Load Line Calibration: auto
CPU PLL Voltage: auto
FSB Termination Voltage: auto
CPU GTLVref(0): Auto
CPU GTLVref(1): Auto
CPU GTLVref(2): Auto
CPU GTLVref(3): Auto
NB GTLVref: Auto
North Bridge voltage: auto
Dram Voltage: 1,90 (come da Costruttore)
NB DDR Vref: auto
DDR3 ChannelA Vref: Auto
DDR3 ChannelB Vref: Auto
South Bridge auto
South Bridge auto
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
Configure Advanced CPU setting
Cpu ratio setting: 10
C1E support: Disabled
CPU TM function: Disabled
Max CPUID value limit: Disabled
Vanderpool Technology: Disabled
Execute Disable bit: Disabled
Core Multi-Processing: Enabled :mc: