MarkManson
01-03-2009, 15:18
- Cerco disperatamente questa elettronica...Se ne avete una per cortesia postatemi una foto cosi vedo se è come la mia e se si lo compro immediatamente...
Grazie ragazzi....Ne ho urgentemente Bisogno!
http://img19.imageshack.us/img19/2571/img0120cd3.th.jpg (http://img19.imageshack.us/my.php?image=img0120cd3.jpg)
http://img253.imageshack.us/img253/3307/img0124br6.th.jpg (http://img253.imageshack.us/my.php?image=img0124br6.jpg)
http://img70.imageshack.us/img70/2293/img0126bh1.th.jpg (http://img70.imageshack.us/my.php?image=img0126bh1.jpg)
Specifications for the 120GB EIDE drive (model WD1200BB, WD1200LB).
Question
Specifications for the 120GB EIDE drive (model WD1200BB, WD1200LB).
Answer
Specifications for the WD Caviar® WD1200BB and WD1200LB
Recommended Setup Parameters
Cylinders 1 16383
Heads 16
Sectors/Track 63
Landing Zone 16383
WPC 16383
Jumper Setting Information Ten Pin Drive
1 All EIDE drives 8.4 GB and larger use 16383 cylinders, 16 heads and 63 SPT due to interface restrictions. Physical Specifications
Formatted Capacity 1 120,034 MB
Interface 40-pin EIDE
Actuator Type Rotary Voice Coil
Number of Disks 2
Data Surfaces 4
Number of Heads 4
Bytes Per Sector 512
User Sectors Per Drive 234,441,648
Servo Type Embedded
Recording Method EPR4 Rate 16/17 PRML
ECC Reed Solomon
Head Park 2 Automatic
PRML - Partial Response Maximum Likelihood
EIDE - Enhanced Integrated Drive Electronics
1 Western Digital defines a megabyte (MB) as 1,000,000 bytes and a gigabyte (GB) as 1,000,000,000 bytes
2 Turning the system power off causes the WD Caviar® to perform an automatic head park operation.
Performance Specifications
Average Seek 1
- Read
- Write 8.9 ms average
10.9 ms average
Track-to-Track Seek 2.0 ms average
Full Stroke Seek 21 ms average
Index Pulse Period 8.3 ms (nominal)
Average Latency 4.2 ms (nominal)
Rotational Speed 7200 RPM (nominal)
Data Transfer Rate (maximum)
- Buffer to Host
- Buffer to Disk
100 MB/s (Mode 5 Ultra ATA)
66.6 MB/s (Mode 4 Ultra ATA)
33.3 MB/s (Mode 2 Ultra ATA)
16.6 MB/s (Mode 4 PIO)
16.6 MB/s (Mode 2 multi-word DMA)
736 Mbits/s maximum
Interleave 1:1
Buffer Size 2 MB
Error Rate - Unrecoverable <1 in 1014 bits read
Spindle Start Time
- From Power-on to Drive Ready 2
- From Power-on to Rotational Speed 3 7.0 s average
5.0 s average
Spindle Stop Time 6.5 s average
Contact Start/Stop Cycles (CSS) 50,000 minimum
1 When measuring seek times, the average latency must be subtracted from read, write, or explicit seek commands.
2 Defined as the time from power-on to the setting of the Drive Ready and Seek Complete including calibration.
3 Defined as the time from power-on to when the full spindle rotational speed is reached.
Physical Dimensions
Height English: 1.028 inches max
Metric: 26.1 mm max
Length English: 5.787 inches max
Metric: 147.0 mm max
Width English: 4.00 inches ±0.010 inch
Metric: 101.6 mm ±0.25 mm
Weight English: 1.32 pounds ±0.13 pounds
Metric: 0.60 kg ±0.06 kg
Electrical Specifications
Current Requirements and Power Dissipation
Operating Mode RMS Current Power, Typical 1
12 VDC 5 VDC
Spinup 1.3 A (max) 650 mA 19.0 W
Read/Write/Idle 350 mA 700 mA 7.75 W
Seek 675 mA 725 mA 12.0 W
Power Management Commands
Operating Mode RMS Current 1 Power, Typical 1
12 VDC 5 VDC
Idle (E1H) 370 mA 625 mA 7.5 W
Standby (E0H) 15 mA 170 mA 1.0 W
Sleep (E6H) 15 mA 60 mA 0.5 W
Input Voltage Requirements
+5.0V (±5%) and 12.0V (±10%)
Ripple
+12 VDC +5 VDC
Maximum
Frequency 200 mV (double amplitude)
0-30 MHz 100 mV (double amplitude)
0-30 MHz
Power Connectors and Cables
Power Connector 4-pin AMP (P/N 84069-1 or equivalent)
Mating Connector Body (AMP 1-480424-0 or equivalent)
Pins (AMP 60619-4 or equivalent)
Power Cable Wire Guage 18 AWG (or heavier)
1 All values are typical (25°C, 5.0V, and 12V input) except where specified as maximum.
Note: Current measurements cut off frequency at 1 kHz.
Environmental Specifications
Shock 1
Operating 20 G, 2 ms (read, write)
Non-operating 250 G, 2 ms
Vibration
Operating Linear: 20-300 Hz, 0.75 G (0 to peak)
Random: 10-300 Hz, 0.004 g2/Hz
Non-operating 5-20 Hz, 0.195 inches (double amplitude)
20-500 Hz, 4.0 G (0 to peak)
Sweep Rate 0.5 octave/minute minimum
Drive Generated Vibration
Operating 0.2 gm-mm typical with the drive in an unconstrained condition
Rotational Shock Non-Operating
Amplitude 20 K rad/sec2
Duration 2 ms
Operating Temperature and Humidity
Temperature 2 5°C to 55°C (41°F to 131°F)
Humidity 5-95% RH non-condensing
33°C (maximum wet bulb)
Thermal Gradient 20°C/hour (maximum)
Humidity Gradient 20%/hour (maximum)
Non-Operating Temperature and Humidity
Temperature -40°C to 65°C (-40°F to 149°F)
Humidity 5-95% RH non-condensing
35°C (maximum wet bulb)
Thermal Gradient 30°C/hour (maximum)
Humidity Gradient 20%/hour (maximum)
Altitude
Operating -1000 feet to 10,000 feet (-305M to 3,050M)
Non-Operating -1000 feet to 40,000 feet (-305M to 12,200M)
Acoustics
Idle Mode 3 34 dBA average
Seek Mode 0 4, 5 36 dBA average
Seek Mode 3 4, 5 35 dBA average
Reliability Specifications
AFR <0.8%
Component Design Life 5 years
Warranty Period Warranty Length
1 Half sine wave, measured without shock isolation and without non-recoverable errors.
2 The system environment must allow sufficient air flow.
3 No audible pure tones.
4 Random seek at a rate of 26 seeks per second.
5 Mode 0 and Mode 3 support the Automatic Acoustic Management feature.
Grazie ragazzi....Ne ho urgentemente Bisogno!
http://img19.imageshack.us/img19/2571/img0120cd3.th.jpg (http://img19.imageshack.us/my.php?image=img0120cd3.jpg)
http://img253.imageshack.us/img253/3307/img0124br6.th.jpg (http://img253.imageshack.us/my.php?image=img0124br6.jpg)
http://img70.imageshack.us/img70/2293/img0126bh1.th.jpg (http://img70.imageshack.us/my.php?image=img0126bh1.jpg)
Specifications for the 120GB EIDE drive (model WD1200BB, WD1200LB).
Question
Specifications for the 120GB EIDE drive (model WD1200BB, WD1200LB).
Answer
Specifications for the WD Caviar® WD1200BB and WD1200LB
Recommended Setup Parameters
Cylinders 1 16383
Heads 16
Sectors/Track 63
Landing Zone 16383
WPC 16383
Jumper Setting Information Ten Pin Drive
1 All EIDE drives 8.4 GB and larger use 16383 cylinders, 16 heads and 63 SPT due to interface restrictions. Physical Specifications
Formatted Capacity 1 120,034 MB
Interface 40-pin EIDE
Actuator Type Rotary Voice Coil
Number of Disks 2
Data Surfaces 4
Number of Heads 4
Bytes Per Sector 512
User Sectors Per Drive 234,441,648
Servo Type Embedded
Recording Method EPR4 Rate 16/17 PRML
ECC Reed Solomon
Head Park 2 Automatic
PRML - Partial Response Maximum Likelihood
EIDE - Enhanced Integrated Drive Electronics
1 Western Digital defines a megabyte (MB) as 1,000,000 bytes and a gigabyte (GB) as 1,000,000,000 bytes
2 Turning the system power off causes the WD Caviar® to perform an automatic head park operation.
Performance Specifications
Average Seek 1
- Read
- Write 8.9 ms average
10.9 ms average
Track-to-Track Seek 2.0 ms average
Full Stroke Seek 21 ms average
Index Pulse Period 8.3 ms (nominal)
Average Latency 4.2 ms (nominal)
Rotational Speed 7200 RPM (nominal)
Data Transfer Rate (maximum)
- Buffer to Host
- Buffer to Disk
100 MB/s (Mode 5 Ultra ATA)
66.6 MB/s (Mode 4 Ultra ATA)
33.3 MB/s (Mode 2 Ultra ATA)
16.6 MB/s (Mode 4 PIO)
16.6 MB/s (Mode 2 multi-word DMA)
736 Mbits/s maximum
Interleave 1:1
Buffer Size 2 MB
Error Rate - Unrecoverable <1 in 1014 bits read
Spindle Start Time
- From Power-on to Drive Ready 2
- From Power-on to Rotational Speed 3 7.0 s average
5.0 s average
Spindle Stop Time 6.5 s average
Contact Start/Stop Cycles (CSS) 50,000 minimum
1 When measuring seek times, the average latency must be subtracted from read, write, or explicit seek commands.
2 Defined as the time from power-on to the setting of the Drive Ready and Seek Complete including calibration.
3 Defined as the time from power-on to when the full spindle rotational speed is reached.
Physical Dimensions
Height English: 1.028 inches max
Metric: 26.1 mm max
Length English: 5.787 inches max
Metric: 147.0 mm max
Width English: 4.00 inches ±0.010 inch
Metric: 101.6 mm ±0.25 mm
Weight English: 1.32 pounds ±0.13 pounds
Metric: 0.60 kg ±0.06 kg
Electrical Specifications
Current Requirements and Power Dissipation
Operating Mode RMS Current Power, Typical 1
12 VDC 5 VDC
Spinup 1.3 A (max) 650 mA 19.0 W
Read/Write/Idle 350 mA 700 mA 7.75 W
Seek 675 mA 725 mA 12.0 W
Power Management Commands
Operating Mode RMS Current 1 Power, Typical 1
12 VDC 5 VDC
Idle (E1H) 370 mA 625 mA 7.5 W
Standby (E0H) 15 mA 170 mA 1.0 W
Sleep (E6H) 15 mA 60 mA 0.5 W
Input Voltage Requirements
+5.0V (±5%) and 12.0V (±10%)
Ripple
+12 VDC +5 VDC
Maximum
Frequency 200 mV (double amplitude)
0-30 MHz 100 mV (double amplitude)
0-30 MHz
Power Connectors and Cables
Power Connector 4-pin AMP (P/N 84069-1 or equivalent)
Mating Connector Body (AMP 1-480424-0 or equivalent)
Pins (AMP 60619-4 or equivalent)
Power Cable Wire Guage 18 AWG (or heavier)
1 All values are typical (25°C, 5.0V, and 12V input) except where specified as maximum.
Note: Current measurements cut off frequency at 1 kHz.
Environmental Specifications
Shock 1
Operating 20 G, 2 ms (read, write)
Non-operating 250 G, 2 ms
Vibration
Operating Linear: 20-300 Hz, 0.75 G (0 to peak)
Random: 10-300 Hz, 0.004 g2/Hz
Non-operating 5-20 Hz, 0.195 inches (double amplitude)
20-500 Hz, 4.0 G (0 to peak)
Sweep Rate 0.5 octave/minute minimum
Drive Generated Vibration
Operating 0.2 gm-mm typical with the drive in an unconstrained condition
Rotational Shock Non-Operating
Amplitude 20 K rad/sec2
Duration 2 ms
Operating Temperature and Humidity
Temperature 2 5°C to 55°C (41°F to 131°F)
Humidity 5-95% RH non-condensing
33°C (maximum wet bulb)
Thermal Gradient 20°C/hour (maximum)
Humidity Gradient 20%/hour (maximum)
Non-Operating Temperature and Humidity
Temperature -40°C to 65°C (-40°F to 149°F)
Humidity 5-95% RH non-condensing
35°C (maximum wet bulb)
Thermal Gradient 30°C/hour (maximum)
Humidity Gradient 20%/hour (maximum)
Altitude
Operating -1000 feet to 10,000 feet (-305M to 3,050M)
Non-Operating -1000 feet to 40,000 feet (-305M to 12,200M)
Acoustics
Idle Mode 3 34 dBA average
Seek Mode 0 4, 5 36 dBA average
Seek Mode 3 4, 5 35 dBA average
Reliability Specifications
AFR <0.8%
Component Design Life 5 years
Warranty Period Warranty Length
1 Half sine wave, measured without shock isolation and without non-recoverable errors.
2 The system environment must allow sufficient air flow.
3 No audible pure tones.
4 Random seek at a rate of 26 seeks per second.
5 Mode 0 and Mode 3 support the Automatic Acoustic Management feature.