PDA

View Full Version : Dell D600 - Nuovo HDD


willy999
07-01-2009, 22:15
Vorrei sostituire questo hdd del Dell D660:
Fujitsu MHT2040AH
FUNCTIONAL SPECIFICATIONS
Formatted storage capacity 40 GB
Bytes per sector 512 bytes
Seek time (track to track) 1.5 typ. ms. typ.
Seek time (average) 12 typ. ms. typ. (read/write)
Seek time (full track) 22 typ. ms. typ. (read/write)
Average latency time 5.56 ms.
Rotational speed 5,400 RPM
Interface ATA-6
Data Buffer Size 8 MB
Data transfer rate (DMA mode 2) 16.6 MB per second
Data transfer rate (PIO mode 4) 16.6 MB per second
Data transfer rate (UDMA mode 2) 33.3 MB per second
Data transfer rate (UDMA mode 4) 66.6 MB per second
Data transfer rate (UltraATA) 100 MB per second
Recording code MEEPRML
Head positioning method Rotary VCM Embedded Servo
Spindle start time 4.0 seconds typical
PHYSICAL SPECIFICATIONS
Power requirement Voltage 5V ±5%
Ripple 100 mV P-P
Power requirement Spin up 1.0A max.
Power requirement Read/write 2.3 W typ.
Power requirement Idle (ready) 0.85 W typ.
Power requirement Sleep 0.1 W typ.
Form Factor 2.5-inch x 9.5mm
Mounting screws M3
Height 9.5 mm
Width 70 mm
Depth 100 mm
Weight 0.099 kg
Ambient temperature (operating) 5 to 55 degrees C
Ambient temperature (non-operating) -40 to 65 degrees C
Maximum DE surface temperature (operating) 60 deg. C

con uno pił capiente: 160 - 200gb. E' possibile? e se si potete consigliarmi qualche modello da acquistare? Grazie.