Maestro_Mihagi
23-12-2008, 22:11
Ciao a tutti. Ho questo pc:
-------------------------
CPU-Z version 1.49
-------------------------
Processors Information
------------------------------------------------------------------------------------
Processor 1 (ID = 0)
Number of cores 1 (max 1)
Number of threads 1 (max 1)
Name Intel Celeron
Codename Northwood
Specification Intel(R) Celeron(R) CPU 2.40GHz
Package Socket 478 mPGA (platform ID = 2h)
CPUID F.2.9
Extended CPUID F.2
Brand ID 10
Core Stepping D1
Technology 0.13 um
Core Speed 2375.4 MHz (24.0 x 99.0 MHz)
Rated Bus speed 395.9 MHz
Stock frequency 2400 MHz
Instructions sets MMX, SSE, SSE2
L1 Data cache 8 KBytes, 4-way set associative, 64-byte line size
Trace cache 12 Kuops, 8-way set associative
L2 cache 128 KBytes, 2-way set associative, 64-byte line size
FID/VID Control no
Features
Chipset
------------------------------------------------------------------------------
Northbridge SiS 650 rev. 80
Southbridge SiS LPC Bridge rev. 25
Graphic Interface AGP
AGP Revision 2.0
AGP Transfer Rate 4x
AGP SBA supported, enabled
Memory Type DDR
Memory Size 256 MBytes
CAS# 2.5
RAS# to CAS# 4
RAS# Precharge 4
Cycle Time (tRAS) 7
Bank Cycle Time (tRC) 12
Memory SPD
------------------------------------------------------------------------------
DIMM #1
General
Memory type DDR
Manufacturer (ID) Nanya Technology (7F7F7F0B00000000)
Size 256 MBytes
Max bandwidth PC3200 (200 MHz)
Part number M2U25664DS88B3G-5T
Serial number FFFFFFFF
Manufacturing date Week 07/Year 04
Attributes
Number of banks 1
Data width 64 bits
Correction None
Registered no
Buffered no
Nominal Voltage 2.50 Volts
EPP no
XMP no
Timings table
Frequency (MHz) 133 166 200
CAS# 2.0 2.5 3.0
RAS# to CAS# delay 2 3 3
RAS# Precharge 2 3 3
TRAS 6 7 8
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Secondo CPUZ la memoria montata è PC3200, ma le specifiche tecniche della scheda madre dicono che supporta al massimo PC2700. Quindi non stà lavorando alla massima frequenza giusto?
Io ho comprato un modulo di 512 MB della Kingston PC2700 DDR. Vorrei impostare l'FSB a 166 Mhz così da avere un rapporto 1:1 FSB RAM. Il problema è che dal bios posso modificare la frequenza, ma non il fattore di moltiplicazione (LOCKED). Posso alzare comunque la frequenza?
Un'ultima cosa: posso usare i due moduli RAM insieme?
Visto che sono alle prime armi, chiedo a voi prima di fare qualche danno.
Grazie :D
-------------------------
CPU-Z version 1.49
-------------------------
Processors Information
------------------------------------------------------------------------------------
Processor 1 (ID = 0)
Number of cores 1 (max 1)
Number of threads 1 (max 1)
Name Intel Celeron
Codename Northwood
Specification Intel(R) Celeron(R) CPU 2.40GHz
Package Socket 478 mPGA (platform ID = 2h)
CPUID F.2.9
Extended CPUID F.2
Brand ID 10
Core Stepping D1
Technology 0.13 um
Core Speed 2375.4 MHz (24.0 x 99.0 MHz)
Rated Bus speed 395.9 MHz
Stock frequency 2400 MHz
Instructions sets MMX, SSE, SSE2
L1 Data cache 8 KBytes, 4-way set associative, 64-byte line size
Trace cache 12 Kuops, 8-way set associative
L2 cache 128 KBytes, 2-way set associative, 64-byte line size
FID/VID Control no
Features
Chipset
------------------------------------------------------------------------------
Northbridge SiS 650 rev. 80
Southbridge SiS LPC Bridge rev. 25
Graphic Interface AGP
AGP Revision 2.0
AGP Transfer Rate 4x
AGP SBA supported, enabled
Memory Type DDR
Memory Size 256 MBytes
CAS# 2.5
RAS# to CAS# 4
RAS# Precharge 4
Cycle Time (tRAS) 7
Bank Cycle Time (tRC) 12
Memory SPD
------------------------------------------------------------------------------
DIMM #1
General
Memory type DDR
Manufacturer (ID) Nanya Technology (7F7F7F0B00000000)
Size 256 MBytes
Max bandwidth PC3200 (200 MHz)
Part number M2U25664DS88B3G-5T
Serial number FFFFFFFF
Manufacturing date Week 07/Year 04
Attributes
Number of banks 1
Data width 64 bits
Correction None
Registered no
Buffered no
Nominal Voltage 2.50 Volts
EPP no
XMP no
Timings table
Frequency (MHz) 133 166 200
CAS# 2.0 2.5 3.0
RAS# to CAS# delay 2 3 3
RAS# Precharge 2 3 3
TRAS 6 7 8
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Secondo CPUZ la memoria montata è PC3200, ma le specifiche tecniche della scheda madre dicono che supporta al massimo PC2700. Quindi non stà lavorando alla massima frequenza giusto?
Io ho comprato un modulo di 512 MB della Kingston PC2700 DDR. Vorrei impostare l'FSB a 166 Mhz così da avere un rapporto 1:1 FSB RAM. Il problema è che dal bios posso modificare la frequenza, ma non il fattore di moltiplicazione (LOCKED). Posso alzare comunque la frequenza?
Un'ultima cosa: posso usare i due moduli RAM insieme?
Visto che sono alle prime armi, chiedo a voi prima di fare qualche danno.
Grazie :D