guadix73
24-11-2008, 15:32
Salve a tutti. Come immaginate dal titolo, ho acquistato la suddetta CPU e il dissi (un artic cooler freezer 7 pro). Li ho montati ma il pc mi si blocca ogni tanto con scheramte blu. Ho aggiornato il bios e niente è cambiato. Sandra 2007 mi riporta:
avviso 236: impostazioni del Vcore superiori al valore predefinito. verificare la impostazioni del Vcore.
Warning W236 - Processor core voltage (Vcore) is higher than rated maximum. Unless the reported value is incorrect or the processor is a different type that is not correctly detected, the voltage is higher than it should be. If you’re over-clocking the processor you may have pushed too far.
Fix: If the BIOS supports processor Vcore setting, check that the voltage programmed is correct for the processor installed. If not, check whether the mainboard supports the installed processor.
Inoltre la velocità della ventola non risulta controllata automaticamente nonostante lo spinotto del dissi sia a 4 pin.
Che mi suggerite?
grazie
avviso 236: impostazioni del Vcore superiori al valore predefinito. verificare la impostazioni del Vcore.
Warning W236 - Processor core voltage (Vcore) is higher than rated maximum. Unless the reported value is incorrect or the processor is a different type that is not correctly detected, the voltage is higher than it should be. If you’re over-clocking the processor you may have pushed too far.
Fix: If the BIOS supports processor Vcore setting, check that the voltage programmed is correct for the processor installed. If not, check whether the mainboard supports the installed processor.
Inoltre la velocità della ventola non risulta controllata automaticamente nonostante lo spinotto del dissi sia a 4 pin.
Che mi suggerite?
grazie