View Full Version : Scheda madre nuova...ma quale???
cirowner
10-11-2008, 17:55
salve a tutti...avrei una domandina da farvi. Ho un pc a cui devo cambiare la scheda madre, che vorrei acquistare su intenet. Visto che però voglio riciclare il processore devo comprere una scheda madre del tutto compatibile col pc. Le caratteristiche che devono essere uguali a quella vecchia in modo che vada bene sono solo il tipo di socket del processore e il tipo di attacco dell'alimentatore??o devo guardare anche qualcos'altro??
Sgogetal4
10-11-2008, 18:05
Il socket prima cosa, poi che ram monti e se quindi se sono ddr, ddr2 o ddr3, poi se hai una scheda video agp o pci-express e per ultimo l'alimentatore.... Cmq se ci dici che componenti hai ossiamo aiutarti meglio...
cirowner
10-11-2008, 18:48
dati scheda madre vecchia:
Marca: gigabyte
modello: ga-81848pm
socket processore: 478
2 slot ram ddr
3 slot pci
1 slot agp
attacco alimentarore serie atx (un socket da 20 pin e uno da 4)
2 attacchi sata
a me serve una scehda madre che abbia queste caratteristiche....se vi serve posso postarvi una foto...
Nitro 76
10-11-2008, 20:50
Questa Asrock P4i65G , potrebbe fare al caso tuo
http://www.trovaprezzi.it/categoria.aspx?id=29&libera=P4i65G&prezzomin=-1&prezzomax=-1
;)
Questa Asrock P4i65G , potrebbe fare al caso tuo
http://www.trovaprezzi.it/categoria.aspx?id=29&libera=P4i65G&prezzomin=-1&prezzomax=-1
;)
quoto la asrock p4i65g che è ottima e io l'ho montata nel mio vecchio cp con P4. però se posso consigliarti io terrei la cpu e prenderei una MSI 945GCM478
cosi avresti comunque una tecnlogia più recente,anche se dovresti comprare delle ram nuove e una nuova scheda video con slot pci express
Specifications
CPU
• Supports Intel® P4 Northwood/Prescott/Celeron processors.
• Supports FSB 533/ 800MHz.
Please refer to CPU Support for compatible CPU; the above description is for reference only.
Chipset
• Intel® 945GC Chipset
- Integrated Intel® GMA 950 graphics core
• Intel® ICH7 Chipset
- Hi-Speed USB (USB2.0) controller, 480Mb/sec, up to 8 ports.
- 4 SATAII ports with transfer rate up to 3Gb/s.
- 1 channel Ultra ATA 100 bus master IDE controller.
- PCI Master v2.3, I/O APIC.
Main Memory
• Supports two unbuffered DIMM of 1.8 Volt DDR2 SDRAM
• Supports dual channel DDR2 memory architecture.
• Supports DDR2 533/667 memory interface. (4GB Max)
Slots
• One PCI Express x16 slot.
• Two 32-bit v2.3 master PCI bus slots. (support 3.3v/5v PCI bus interface)
On-Board IDE/SATA
• One Ultra DMA 66/100 IDE controllers integrated in ICH7
- Supports PIO, Bus Master operation modes.
- Can connect up to two Ultra ATA drives.
• SATAII controller integrated in ICH7
- Up to 3Gb/s transfer speed.
- Can connect up to four SATAII devices.
Audio
• Chip integrated by Realtek® ALC888
- Flexible 7.1-channel audio with jack sensing
- Compliant with Azalia 1.0 Spec
LAN
• Supports 10 / 100 Mb/s Fast Ethernet by Realtek RTL8101E.
• Supports 10 / 100 /1000 Mb/s Fast Ethernet by Realtek RTL8111C.
- Supports ACPI Power Management.
Internal I/O Connectors
- ATX 24-Pin power connector
- 4-pin ATX 12V power connector
- 1 x CPU / System x 2 FAN connectors
- CD-in connector
- Front panel audio connector
- 2 x Front panel connectors
- 2 x USB 2.0 connector support additional 4 ports
- 1 x Floppy disk drive connector
- 4 x Serial ATAII connectors
- 1 x ATA100 connector
- 1 x SPDIF-out connector
- Chassis intrusion switch connector
- Clear CMOS jumper
MSI Reminds You...
• The floppy disk cable will be optional.
Back Panel I/O Ports
- 1 x Parallel port
- 1 x Serial port (COM 1)
- 1 x Graphics Card port
- 1 x PS/2 keyboard
- 1 x PS/2 mouse
- 1 x 6 in 1 audio jack
- 4 x USB 2.0 ports
- 1 x RJ45 LAN jack
BIOS
• The mainboard BIOS provides "Plug & Play" BIOS which detects the peripheral devices and
expansion cards of the board automatically.
• The mainboard provides a Desktop Management Interface(DMI) function which records your
mainboard specifications.
Dimension
• 24.5cm(L) x 20.0cm(W) Micro-ATX Form Factor
vBulletin® v3.6.4, Copyright ©2000-2025, Jelsoft Enterprises Ltd.