grey.fox
05-11-2008, 20:13
Salve,c'è qualcuno che mi può spiegare passo passo come si crea una configurazione per questo router e come si fa poi a "passargliela"??
Scusate ma sono totalmente ignorante in materia,prima avevo uno zyxel e collegandomi tramite telnet usciva un menù di configurazione abbastanza semplice,qui invece sempre tramite telnet sono capace solo a entrare nel router e vedere la versione del sofware che vi posto qui sotto.
Qualcuno mi può dare una mano?
Devo configurarlo per teleconomy flat.
Cisco Internetwork Operating System Software
IOS (tm) C800 Software (C800-SY6-MW), Version 12.0(7)T, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Mon 06-Dec-99 14:10 by phanguye
Image text-base: 0x000EA000, data-base: 0x006C8000
ROM: TinyROM version 1.4(1)
Router uptime is 1 minute
System returned to ROM by power-on
System image file is "flash:aaa1160.bin"
Cisco C803 (MPC860) processor (revision 1) with 43756K bytes of virtual memory.
Processor board ID FOC0742009S
CPU part number 33
X.25 software, Version 3.0.0.
Bridging software.
Basic Rate ISDN software, Version 1.1.
1 Ethernet/IEEE 802.3 interface(s)
1 ISDN Basic Rate interface(s)
4M bytes of physical memory (DRAM)
8K bytes of non-volatile configuration memory
8M bytes of flash on board (4M from flash card)
Configuration register is 0x2102
Scusate ma sono totalmente ignorante in materia,prima avevo uno zyxel e collegandomi tramite telnet usciva un menù di configurazione abbastanza semplice,qui invece sempre tramite telnet sono capace solo a entrare nel router e vedere la versione del sofware che vi posto qui sotto.
Qualcuno mi può dare una mano?
Devo configurarlo per teleconomy flat.
Cisco Internetwork Operating System Software
IOS (tm) C800 Software (C800-SY6-MW), Version 12.0(7)T, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Mon 06-Dec-99 14:10 by phanguye
Image text-base: 0x000EA000, data-base: 0x006C8000
ROM: TinyROM version 1.4(1)
Router uptime is 1 minute
System returned to ROM by power-on
System image file is "flash:aaa1160.bin"
Cisco C803 (MPC860) processor (revision 1) with 43756K bytes of virtual memory.
Processor board ID FOC0742009S
CPU part number 33
X.25 software, Version 3.0.0.
Bridging software.
Basic Rate ISDN software, Version 1.1.
1 Ethernet/IEEE 802.3 interface(s)
1 ISDN Basic Rate interface(s)
4M bytes of physical memory (DRAM)
8K bytes of non-volatile configuration memory
8M bytes of flash on board (4M from flash card)
Configuration register is 0x2102