stefandre_nicari
22-10-2008, 21:06
Salve a tutti! Vorrei acquistare dei nuovi moduli di RAM. Attualmente ho 1GB...vorrei arrivare a 2...solo che non essendomi mai interessato all'argomento non ho la più pallida idea di cosa devo cercare.
La mia motherboard supporta fino a 4 moduli...adesso ce ne sono 2 da 512mb...solo che non ho capito bene che caratteristiche devono avere i nuovi banchi per essere supportati...vi posto ciò che trovo nel manuale...
1.4 System memory
1.4.1 DIMM sockets location
The motherboard comes with two 184-pin Double Data Rate (DDR) Dual
Inline Memory Modules (DIMM) sockets.
1.4.2 Memory Configurations
You may install 256 MB, 512 MB and 1 GB unbuffered non-ECC DDR DIMMs
into the DIMM sockets using the memory configurations in this section.
• For dual-channel configuration, the total size of memory module(s)
installed per channel must tbe the same (DIMM_A2 = DIMM_B2).
• Always install DIMMs with the same CAS latency. For optimum
compatibility, it is recommended that you obtain memory modules
from the same vendor. Refer to the DDR Qualified Vendors List on
the next page for details.
• Due to chipset resource allocation, the system may detect less than
4 GB system memory when you installed four 1 GB DDR memory
modules.
• This motherboard does not support memory modules made up of
128 Mb chips or double sided x16 memory modules.
http://img407.imageshack.us/img407/2761/immaginenu9.png (http://imageshack.us)
Cosa mi consilgiate? Cambio i due da 512 e ne metto di nuovi? Che modelli mi consigliate?
La mia motherboard supporta fino a 4 moduli...adesso ce ne sono 2 da 512mb...solo che non ho capito bene che caratteristiche devono avere i nuovi banchi per essere supportati...vi posto ciò che trovo nel manuale...
1.4 System memory
1.4.1 DIMM sockets location
The motherboard comes with two 184-pin Double Data Rate (DDR) Dual
Inline Memory Modules (DIMM) sockets.
1.4.2 Memory Configurations
You may install 256 MB, 512 MB and 1 GB unbuffered non-ECC DDR DIMMs
into the DIMM sockets using the memory configurations in this section.
• For dual-channel configuration, the total size of memory module(s)
installed per channel must tbe the same (DIMM_A2 = DIMM_B2).
• Always install DIMMs with the same CAS latency. For optimum
compatibility, it is recommended that you obtain memory modules
from the same vendor. Refer to the DDR Qualified Vendors List on
the next page for details.
• Due to chipset resource allocation, the system may detect less than
4 GB system memory when you installed four 1 GB DDR memory
modules.
• This motherboard does not support memory modules made up of
128 Mb chips or double sided x16 memory modules.
http://img407.imageshack.us/img407/2761/immaginenu9.png (http://imageshack.us)
Cosa mi consilgiate? Cambio i due da 512 e ne metto di nuovi? Che modelli mi consigliate?