ArtX
25-09-2008, 21:43
Ciao,
mi è arrivato da pochissimo questo pc in sign, e avendo sempre avuto un portatile non sò molto di overclock anche se lo avevo fatto con il vecchio pc di famiglia, un athlon xp2000 palomino, ma quelli erano altri tempi e poi con gli amd era semplicissimo, ora con questo intel è un casino tra FSB e altro :D
Mi riuscite a dare solo alcune dritte?? :)
Eccovi alcune info prese da cpu-z:
Processors Information
------------------------------------------------------------------------------------
Processor 1 (ID = 0)
Number of cores 4 (max 4)
Number of threads 4 (max 4)
Name Intel Core 2 Quad Q9550
Codename Yorkfield
Specification Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz
Package Socket 775 LGA (platform ID = 4h)
CPUID 6.7.7
Extended CPUID 6.17
Core Stepping C1
Technology 45 nm
Core Speed 2000.0 MHz (6.0 x 333.3 MHz)
Rated Bus speed 1333.3 MHz
Stock frequency 2833 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, EM64T
L1 Data cache 4 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 4 x 32 KBytes, 8-way set associative, 64-byte line size
L2 cache 2 x 6144 KBytes, 24-way set associative, 64-byte line size
FID/VID Control yes
FID range 6.0x - 8.5x
max VID 1.250 V
Features XD, VT
Chipset
------------------------------------------------------------------------------
Northbridge Intel X48 rev. 01
Southbridge Intel 82801IR (ICH9R) rev. 02
Graphic Interface PCI-Express
PCI-E Link Width x16
PCI-E Max Link Width x16
Memory Type DDR2
Memory Size 4096 MBytes
Channels Dual (Symmetric)
Memory Frequency 533.3 MHz (5:8)
CAS# 5.0
RAS# to CAS# 7
RAS# Precharge 7
Cycle Time (tRAS) 20
Command Rate 2T
Memory SPD
------------------------------------------------------------------------------
DIMM #1
General
Memory type DDR2
Module format Regular UDIMM
Manufacturer (ID) G.Skill (7F7F7F7FCD000000)
Size 2048 MBytes
Max bandwidth PC2-6400 (400 MHz)
Part number F2-8800CL5-2GBPI
Attributes
Number of banks 2
Data width 64 bits
Correction None
Nominal Voltage 1.80 Volts
EPP yes (1 profiles)
XMP no
Timings table
Frequency (MHz) 266 400
CAS# 4.0 5.0
RAS# to CAS# delay 4 5
RAS# Precharge 4 5
TRAS 10 15
TRC 16 24
EPP profile 1 (full)
Voltage level 1.900 Volts
Address Command Rate 2T
Cycle time 1.875 ns (533.3 MHz)
tCL 5.0 clocks
tRCD 5 clocks (9.25 ns)
tRP 5 clocks (9.25 ns)
tRAS 15 clocks (28.00 ns)
tRC 48 clocks (90.00 ns)
tWR 13 clocks (24.00 ns)
DIMM #2
General
Memory type DDR2
Module format Regular UDIMM
Manufacturer (ID) G.Skill (7F7F7F7FCD000000)
Size 2048 MBytes
Max bandwidth PC2-6400 (400 MHz)
Part number F2-8800CL5-2GBPI
Attributes
Number of banks 2
Data width 64 bits
Correction None
Nominal Voltage 1.80 Volts
EPP yes (1 profiles)
XMP no
Timings table
Frequency (MHz) 266 400
CAS# 4.0 5.0
RAS# to CAS# delay 4 5
RAS# Precharge 4 5
TRAS 10 15
TRC 16 24
EPP profile 1 (full)
Voltage level 1.900 Volts
Address Command Rate 2T
Cycle time 1.875 ns (533.3 MHz)
tCL 5.0 clocks
tRCD 5 clocks (9.25 ns)
tRP 5 clocks (9.25 ns)
tRAS 15 clocks (28.00 ns)
tRC 48 clocks (90.00 ns)
tWR 13 clocks (24.00 ns)
Mainboard Model X48-DQ6 (0x1BC - 0x576256)
Hardware monitor
-----------------------------------------------------
ITE IT87 hardware monitor
Voltage sensor 0 1.10 Volts [0x45] (CPU VCORE)
Voltage sensor 1 1.94 Volts [0x79] (DDR)
Voltage sensor 2 3.31 Volts [0xCF] (+3.3V)
Voltage sensor 3 5.05 Volts [0xBC] (+5V)
Voltage sensor 7 12.54 Volts [0xC4] (+12V)
Voltage sensor 8 3.06 Volts [0xBF] (VBAT)
Temperature sensor 0 31°C (87°F) [0x1F] (System)
Temperature sensor 1 21°C (69°F) [0x15] (CPU)
Fan sensor 0 996 RPM [0x2A6] (FANIN0
Hardware monitor
-----------------------------------------------------
Intel Core 2 Quad Q9550 hardware monitor
Temperature sensor 0 41°C (105°F) [0x3B] (Core #0)
Temperature sensor 1 37°C (98°F) [0x3F] (Core #1)
Temperature sensor 3 39°C (102°F) [0x3D] (Core #3)
Temperature sensor 2 40°C (103°F) [0x3C] (Core #2)
DMI BIOS
--------
vendor Award Software International, Inc.
version F6
date 02/29/2008
Per ora è configurato bene? Cosa si potrebbe fare :D ? e come si usano i multibios delle gigabyte ?
Grazie
mi è arrivato da pochissimo questo pc in sign, e avendo sempre avuto un portatile non sò molto di overclock anche se lo avevo fatto con il vecchio pc di famiglia, un athlon xp2000 palomino, ma quelli erano altri tempi e poi con gli amd era semplicissimo, ora con questo intel è un casino tra FSB e altro :D
Mi riuscite a dare solo alcune dritte?? :)
Eccovi alcune info prese da cpu-z:
Processors Information
------------------------------------------------------------------------------------
Processor 1 (ID = 0)
Number of cores 4 (max 4)
Number of threads 4 (max 4)
Name Intel Core 2 Quad Q9550
Codename Yorkfield
Specification Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz
Package Socket 775 LGA (platform ID = 4h)
CPUID 6.7.7
Extended CPUID 6.17
Core Stepping C1
Technology 45 nm
Core Speed 2000.0 MHz (6.0 x 333.3 MHz)
Rated Bus speed 1333.3 MHz
Stock frequency 2833 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, EM64T
L1 Data cache 4 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 4 x 32 KBytes, 8-way set associative, 64-byte line size
L2 cache 2 x 6144 KBytes, 24-way set associative, 64-byte line size
FID/VID Control yes
FID range 6.0x - 8.5x
max VID 1.250 V
Features XD, VT
Chipset
------------------------------------------------------------------------------
Northbridge Intel X48 rev. 01
Southbridge Intel 82801IR (ICH9R) rev. 02
Graphic Interface PCI-Express
PCI-E Link Width x16
PCI-E Max Link Width x16
Memory Type DDR2
Memory Size 4096 MBytes
Channels Dual (Symmetric)
Memory Frequency 533.3 MHz (5:8)
CAS# 5.0
RAS# to CAS# 7
RAS# Precharge 7
Cycle Time (tRAS) 20
Command Rate 2T
Memory SPD
------------------------------------------------------------------------------
DIMM #1
General
Memory type DDR2
Module format Regular UDIMM
Manufacturer (ID) G.Skill (7F7F7F7FCD000000)
Size 2048 MBytes
Max bandwidth PC2-6400 (400 MHz)
Part number F2-8800CL5-2GBPI
Attributes
Number of banks 2
Data width 64 bits
Correction None
Nominal Voltage 1.80 Volts
EPP yes (1 profiles)
XMP no
Timings table
Frequency (MHz) 266 400
CAS# 4.0 5.0
RAS# to CAS# delay 4 5
RAS# Precharge 4 5
TRAS 10 15
TRC 16 24
EPP profile 1 (full)
Voltage level 1.900 Volts
Address Command Rate 2T
Cycle time 1.875 ns (533.3 MHz)
tCL 5.0 clocks
tRCD 5 clocks (9.25 ns)
tRP 5 clocks (9.25 ns)
tRAS 15 clocks (28.00 ns)
tRC 48 clocks (90.00 ns)
tWR 13 clocks (24.00 ns)
DIMM #2
General
Memory type DDR2
Module format Regular UDIMM
Manufacturer (ID) G.Skill (7F7F7F7FCD000000)
Size 2048 MBytes
Max bandwidth PC2-6400 (400 MHz)
Part number F2-8800CL5-2GBPI
Attributes
Number of banks 2
Data width 64 bits
Correction None
Nominal Voltage 1.80 Volts
EPP yes (1 profiles)
XMP no
Timings table
Frequency (MHz) 266 400
CAS# 4.0 5.0
RAS# to CAS# delay 4 5
RAS# Precharge 4 5
TRAS 10 15
TRC 16 24
EPP profile 1 (full)
Voltage level 1.900 Volts
Address Command Rate 2T
Cycle time 1.875 ns (533.3 MHz)
tCL 5.0 clocks
tRCD 5 clocks (9.25 ns)
tRP 5 clocks (9.25 ns)
tRAS 15 clocks (28.00 ns)
tRC 48 clocks (90.00 ns)
tWR 13 clocks (24.00 ns)
Mainboard Model X48-DQ6 (0x1BC - 0x576256)
Hardware monitor
-----------------------------------------------------
ITE IT87 hardware monitor
Voltage sensor 0 1.10 Volts [0x45] (CPU VCORE)
Voltage sensor 1 1.94 Volts [0x79] (DDR)
Voltage sensor 2 3.31 Volts [0xCF] (+3.3V)
Voltage sensor 3 5.05 Volts [0xBC] (+5V)
Voltage sensor 7 12.54 Volts [0xC4] (+12V)
Voltage sensor 8 3.06 Volts [0xBF] (VBAT)
Temperature sensor 0 31°C (87°F) [0x1F] (System)
Temperature sensor 1 21°C (69°F) [0x15] (CPU)
Fan sensor 0 996 RPM [0x2A6] (FANIN0
Hardware monitor
-----------------------------------------------------
Intel Core 2 Quad Q9550 hardware monitor
Temperature sensor 0 41°C (105°F) [0x3B] (Core #0)
Temperature sensor 1 37°C (98°F) [0x3F] (Core #1)
Temperature sensor 3 39°C (102°F) [0x3D] (Core #3)
Temperature sensor 2 40°C (103°F) [0x3C] (Core #2)
DMI BIOS
--------
vendor Award Software International, Inc.
version F6
date 02/29/2008
Per ora è configurato bene? Cosa si potrebbe fare :D ? e come si usano i multibios delle gigabyte ?
Grazie