Ventresca
24-08-2008, 23:07
Salve a tutti! Ieri, a seguito dell'ennesima botta presa dal mio pc desktop, l'HDD mi ha definitivamente abbandonato.
Non era la prima volta (ho il pc messo in una posizione infame, per cui appena c'è un po' di corrente si prende delle mazzate dalla finestra spinta dal vento), ed infatti aveva già qualche problemino, ma ora sembra proprio essere arrivato al capolinea.
Ubuntu e XP mi si avviano di rado, da un fscheck di Linux sono usciti diversi inodes danneggiati, entrambi i sistemi operativi hanno dei blocchi improvvisi (quando si avviano... e chissà perchè soprattutto su FireFox) con spia dell'HDD che resta accesa, fissa.
E soprattutto, dopo i suddetti blocchi, lo si può sentire nettamente ticchettare, come se la testina cercasse di leggere senza riuscirci (una cosa che ho sentito già su un vecchio iPod dall'HDD rotto).
Ora, trattandosi di un vecchio socket 754 equipaggiato con HDD ATA da 120 GB, come intervengo?
La mobo è una Asus K8V SE Deluxe, supporta i SATA 1, io vorrei mettere un singolo disco capiente e soprattutto affidabile, anche a scapito della velocità. Il pc infatti passa gran parte della giornata a fare da media server e, botte della finestra a parte, oggettivamente è sottoposto a stress costante in lettura e scrittura.
Ovviamente non posso rimetterci un ATA come il vecchio IBM Deskstar che ora monta... quindi cosa mi consigliate, che sia capiente e affidabile (e soprattutto trattandosi di mobo vecchia, compatibile)?
Un'ultima domanda: a patto di riuscire ad avviare uno dei due OS con successo e di mantenerlo stabile durante il trasferimento, se io attacco il nuovo HDD in SATA e lascio in ATA EIDE quello che attualmente ho, posso procedere ad un cloning o devo toccare qualche settaggio nel bios o nei jumper degli HDD?
In parole povere, se lascio il mio HDD sfondato in ATA primary, facendo il boot da lì così come sta ora, e attacco quello nuovo in SATA contemporaneamente, me lo vede diretto come HDD secondario?
Grazie in anticipo.
P.S.: per chi fosse interessato, il log SMART:
sudo smartctl -l error /dev/sda
smartctl version 5.37 [x86_64-unknown-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF READ SMART DATA SECTION ===
SMART Error Log Version: 1
ATA Error Count: 37 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 37 occurred at disk power-on lifetime: 20169 hours (840 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 20 38 49 59 ea Error: UNC 32 sectors at LBA = 0x0a594938 = 173623608
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 38 20 49 59 ea 00 00:04:53.100 READ DMA
27 00 00 00 00 00 e0 00 00:04:53.100 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 00:04:53.100 IDENTIFY DEVICE
ef 07 00 00 00 00 a0 00 00:04:53.100 SET FEATURES [Set device spin-up]
ec 00 00 00 00 00 a0 02 00:04:53.100 IDENTIFY DEVICE
Error 36 occurred at disk power-on lifetime: 20169 hours (840 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 20 38 49 59 ea Error: UNC 32 sectors at LBA = 0x0a594938 = 173623608
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 38 20 49 59 ea 00 00:04:48.200 READ DMA
27 00 00 00 00 00 e0 00 00:04:48.200 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 00:04:48.200 IDENTIFY DEVICE
ef 07 00 00 00 00 a0 00 00:04:48.200 SET FEATURES [Set device spin-up]
ec 00 00 00 00 00 a0 02 00:04:48.200 IDENTIFY DEVICE
Error 35 occurred at disk power-on lifetime: 20169 hours (840 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 20 38 49 59 ea Error: UNC 32 sectors at LBA = 0x0a594938 = 173623608
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 38 20 49 59 ea 00 00:04:43.300 READ DMA
27 00 00 00 00 00 e0 00 00:04:43.300 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 00:04:43.300 IDENTIFY DEVICE
ef 07 00 00 00 00 a0 00 00:04:43.300 SET FEATURES [Set device spin-up]
ec 00 00 00 00 00 a0 02 00:04:43.300 IDENTIFY DEVICE
Error 34 occurred at disk power-on lifetime: 20169 hours (840 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 20 38 49 59 ea Error: UNC 32 sectors at LBA = 0x0a594938 = 173623608
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 38 20 49 59 ea 00 00:04:38.300 READ DMA
27 00 00 00 00 00 e0 00 00:04:38.300 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 00:04:38.300 IDENTIFY DEVICE
ef 07 00 00 00 00 a0 00 00:04:38.300 SET FEATURES [Set device spin-up]
ec 00 00 00 00 00 a0 02 00:04:38.300 IDENTIFY DEVICE
Error 33 occurred at disk power-on lifetime: 20169 hours (840 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 20 38 49 59 ea Error: UNC 32 sectors at LBA = 0x0a594938 = 173623608
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 38 20 49 59 ea 00 00:04:33.400 READ DMA
27 00 00 00 00 00 e0 00 00:04:33.400 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 00:04:33.400 IDENTIFY DEVICE
ef 07 00 00 00 00 a0 00 00:04:33.400 SET FEATURES [Set device spin-up]
ec 00 00 00 00 00 a0 02 00:04:33.400 IDENTIFY DEVICE
Non era la prima volta (ho il pc messo in una posizione infame, per cui appena c'è un po' di corrente si prende delle mazzate dalla finestra spinta dal vento), ed infatti aveva già qualche problemino, ma ora sembra proprio essere arrivato al capolinea.
Ubuntu e XP mi si avviano di rado, da un fscheck di Linux sono usciti diversi inodes danneggiati, entrambi i sistemi operativi hanno dei blocchi improvvisi (quando si avviano... e chissà perchè soprattutto su FireFox) con spia dell'HDD che resta accesa, fissa.
E soprattutto, dopo i suddetti blocchi, lo si può sentire nettamente ticchettare, come se la testina cercasse di leggere senza riuscirci (una cosa che ho sentito già su un vecchio iPod dall'HDD rotto).
Ora, trattandosi di un vecchio socket 754 equipaggiato con HDD ATA da 120 GB, come intervengo?
La mobo è una Asus K8V SE Deluxe, supporta i SATA 1, io vorrei mettere un singolo disco capiente e soprattutto affidabile, anche a scapito della velocità. Il pc infatti passa gran parte della giornata a fare da media server e, botte della finestra a parte, oggettivamente è sottoposto a stress costante in lettura e scrittura.
Ovviamente non posso rimetterci un ATA come il vecchio IBM Deskstar che ora monta... quindi cosa mi consigliate, che sia capiente e affidabile (e soprattutto trattandosi di mobo vecchia, compatibile)?
Un'ultima domanda: a patto di riuscire ad avviare uno dei due OS con successo e di mantenerlo stabile durante il trasferimento, se io attacco il nuovo HDD in SATA e lascio in ATA EIDE quello che attualmente ho, posso procedere ad un cloning o devo toccare qualche settaggio nel bios o nei jumper degli HDD?
In parole povere, se lascio il mio HDD sfondato in ATA primary, facendo il boot da lì così come sta ora, e attacco quello nuovo in SATA contemporaneamente, me lo vede diretto come HDD secondario?
Grazie in anticipo.
P.S.: per chi fosse interessato, il log SMART:
sudo smartctl -l error /dev/sda
smartctl version 5.37 [x86_64-unknown-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF READ SMART DATA SECTION ===
SMART Error Log Version: 1
ATA Error Count: 37 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 37 occurred at disk power-on lifetime: 20169 hours (840 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 20 38 49 59 ea Error: UNC 32 sectors at LBA = 0x0a594938 = 173623608
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 38 20 49 59 ea 00 00:04:53.100 READ DMA
27 00 00 00 00 00 e0 00 00:04:53.100 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 00:04:53.100 IDENTIFY DEVICE
ef 07 00 00 00 00 a0 00 00:04:53.100 SET FEATURES [Set device spin-up]
ec 00 00 00 00 00 a0 02 00:04:53.100 IDENTIFY DEVICE
Error 36 occurred at disk power-on lifetime: 20169 hours (840 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 20 38 49 59 ea Error: UNC 32 sectors at LBA = 0x0a594938 = 173623608
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 38 20 49 59 ea 00 00:04:48.200 READ DMA
27 00 00 00 00 00 e0 00 00:04:48.200 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 00:04:48.200 IDENTIFY DEVICE
ef 07 00 00 00 00 a0 00 00:04:48.200 SET FEATURES [Set device spin-up]
ec 00 00 00 00 00 a0 02 00:04:48.200 IDENTIFY DEVICE
Error 35 occurred at disk power-on lifetime: 20169 hours (840 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 20 38 49 59 ea Error: UNC 32 sectors at LBA = 0x0a594938 = 173623608
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 38 20 49 59 ea 00 00:04:43.300 READ DMA
27 00 00 00 00 00 e0 00 00:04:43.300 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 00:04:43.300 IDENTIFY DEVICE
ef 07 00 00 00 00 a0 00 00:04:43.300 SET FEATURES [Set device spin-up]
ec 00 00 00 00 00 a0 02 00:04:43.300 IDENTIFY DEVICE
Error 34 occurred at disk power-on lifetime: 20169 hours (840 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 20 38 49 59 ea Error: UNC 32 sectors at LBA = 0x0a594938 = 173623608
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 38 20 49 59 ea 00 00:04:38.300 READ DMA
27 00 00 00 00 00 e0 00 00:04:38.300 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 00:04:38.300 IDENTIFY DEVICE
ef 07 00 00 00 00 a0 00 00:04:38.300 SET FEATURES [Set device spin-up]
ec 00 00 00 00 00 a0 02 00:04:38.300 IDENTIFY DEVICE
Error 33 occurred at disk power-on lifetime: 20169 hours (840 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 20 38 49 59 ea Error: UNC 32 sectors at LBA = 0x0a594938 = 173623608
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 38 20 49 59 ea 00 00:04:33.400 READ DMA
27 00 00 00 00 00 e0 00 00:04:33.400 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 00:04:33.400 IDENTIFY DEVICE
ef 07 00 00 00 00 a0 00 00:04:33.400 SET FEATURES [Set device spin-up]
ec 00 00 00 00 00 a0 02 00:04:33.400 IDENTIFY DEVICE