View Full Version : grub error 17
ho il pc in dual boot con Linux e Windows e oggi ho dovuto ripristinare Windows con un immagine di salvataggio della partizione
ovviamente al riavvio grub era corrotto, allora ho avviato la live di Ubuntu e ripristinato (in parte) il grub da terminale in questo modo:
sudo grub
root (hd0,5)
setup (hd0)
quit
infatti al riavvio del sistemo mi ritrovo il mio bel grub che avevo prima solo che Windows si avvia regolarmente mentre se cerco di avviare Ububtu mi dà l'errore:
Grub Error 17
c'è un modo per risolvere il problema?
Non mi va di reistallare Ubuntu :cry:
Fai così:
1)Avvia la live di Ubuntu
2)Postaci il contenuto del comando " sudo fdisk -l " (senza "")
3)Monta la partizione di Ubuntu nella live e posta il contenuto del file /boot/grub/menu.lst
2)Postaci il contenuto del comando " sudo fdisk -l
ubuntu@ubuntu:~$ sudo fdisk -l
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xf802f802
Device Boot Start End Blocks Id System
/dev/sda1 * 1 7856 63103288+ 7 HPFS/NTFS
/dev/sda2 7857 30401 181092712+ 5 Extended
/dev/sda5 7857 20907 104832126 7 HPFS/NTFS
/dev/sda6 20908 30167 74380918+ 83 Linux
/dev/sda7 30168 30401 1879573+ 82 Linux swap / Solaris
3)Monta la partizione di Ubuntu nella live e posta il contenuto del file /boot/grub/menu.lst
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=0855549f-90ea-491b-a27a-3c10f1a8737e ro
## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,6)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 8.04, kernel 2.6.24-18-generic
root (hd0,6)
kernel /boot/vmlinuz-2.6.24-18-generic root=UUID=0855549f-90ea-491b-a27a-3c10f1a8737e ro quiet splash
initrd /boot/initrd.img-2.6.24-18-generic
quiet
title Ubuntu 8.04, kernel 2.6.24-18-generic (recovery mode)
root (hd0,6)
kernel /boot/vmlinuz-2.6.24-18-generic root=UUID=0855549f-90ea-491b-a27a-3c10f1a8737e ro single
initrd /boot/initrd.img-2.6.24-18-generic
title Ubuntu 8.04, kernel 2.6.24-17-generic
root (hd0,6)
kernel /boot/vmlinuz-2.6.24-17-generic root=UUID=0855549f-90ea-491b-a27a-3c10f1a8737e ro quiet splash
initrd /boot/initrd.img-2.6.24-17-generic
quiet
title Ubuntu 8.04, kernel 2.6.24-17-generic (recovery mode)
root (hd0,6)
kernel /boot/vmlinuz-2.6.24-17-generic root=UUID=0855549f-90ea-491b-a27a-3c10f1a8737e ro single
initrd /boot/initrd.img-2.6.24-17-generic
title Ubuntu 8.04, kernel 2.6.24-16-generic
root (hd0,6)
kernel /boot/vmlinuz-2.6.24-16-generic root=UUID=0855549f-90ea-491b-a27a-3c10f1a8737e ro quiet splash
initrd /boot/initrd.img-2.6.24-16-generic
quiet
title Ubuntu 8.04, kernel 2.6.24-16-generic (recovery mode)
root (hd0,6)
kernel /boot/vmlinuz-2.6.24-16-generic root=UUID=0855549f-90ea-491b-a27a-3c10f1a8737e ro single
initrd /boot/initrd.img-2.6.24-16-generic
title Ubuntu 8.04, memtest86+
root (hd0,6)
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Microsoft Windows XP Professional
root (hd0,0)
savedefault
makeactive
chainloader +1
Sostituisci (hd0,6) con (hd0,3)
il numero 3 sta ad indicare la quarta partizione, infatti si parte da 0 che indicala prima, 1 indica la seconda e così via...
facci sapere...
Mi stranizza il fatto che non ci siano le partizione sda3 e sda4 :confused:
Se la partizione di Ubuntu è /dev/sda6, si dovrebbe sostituire (hd0,6) con (hd0,5) ;)
Sostituisci (hd0,6) con (hd0,3)
il numero 3 sta ad indicare la quarta partizione, infatti si parte da 0 che indicala prima, 1 indica la seconda e così via...
facci sapere...quarta partizione che non c'è ! Ha ragione Leed, devi sostituire con (hd0,5).
sda3 e sda4 non ci sono perché sono riservate alle eventuali partizioni primarie che non possono essere più di 4.
grazie a tutti per le risposte :)
avete ragione, sul Grub la (hd0, 6) fa riferimento alla partizione dati in NTFS
credo che sia giusto correggere con (hd0, 5) perchè Grub associa un numero in meno rispetto a Linux quindi la partizione sda6 sul Grub dovrebbe essere hd0, 5
stasera provo a sistemare :D
grazie a tutti per le risposte :)
avete ragione, sul Grub la (hd0, 6) fa riferimento alla partizione dati in NTFS
credo che sia giusto correggere con (hd0, 5) perchè Grub associa un numero in meno rispetto a Linux quindi la partizione sda6 sul Grub dovrebbe essere hd0, 5
stasera provo a sistemare :D
per evitare di avviare live, montare, riavviare all'infinito, etc, etc,
quando sei nel menu di grub, scegli il sistema, premi "e", entra nel menu, modifica la voce che ti serve e poi premi "b".
quando trovi il settaggio giusto, apri menu.lst modifichi e salvi
per evitare di avviare live, montare, riavviare all'infinito, etc, etc,
quando sei nel menu di grub, scegli il sistema, premi "e", entra nel menu, modifica la voce che ti serve e poi premi "b".
quando trovi il settaggio giusto, apri menu.lst modifichi e salvi
grazie per il consiglio, questo non lo conoscevo
vBulletin® v3.6.4, Copyright ©2000-2025, Jelsoft Enterprises Ltd.