oc di x2 5000+ 65w consigli fast per overclock?

[MaxT]

ho un 5000 x2 65w stepping g2
questo http://www.cpu-world.com/CPUs/K8/AMD-Athlon%2064%20X2%205000+%20-%20ADO5000IAA5DO%20(ADO5000DOBOX).html

la mobo è una asrock con Hybrid Booster si può variare moltiplicatore, il VCore e l'FSB da bios. chipset mobo è nForce 430/GeForce 6150SE
memeria ddr 800 cl5 team elite


Mi son letto la guida sull'overclok del k8 ed altri amd. anche se mi sono perso nel percorso di lettura.

Qualche cosnfiglio per ottenere un buon overclock con questa cpu? :help:

[MaxT]

le opzioni disponibili sulla scheda sono:

-------------------------CPU Configuration
AM2 Boost
If you set this option to [Enabled], you will enable ASRock AM2 Boost
function, which will improve the memory performance. The default value is
[Disabled]. Please refer to caution 8 on page 8 for details.
Overclock Mode
Use this to select Overclock Mode. The default value is [Auto]. Configuration
options: [Auto], [CPU, PCIE, Sync.] and [CPU, PCIE, Async.].
CPU Frequency (MHz)
Use this option to adjust CPU frequency. The default value is [200].
PCIE Frequency (MHz)
Use this option to adjust PCIE frequency. The default value is [100].
Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
CPU/LDT Spread Spectrum
This feature will be set to [0.75% Hershey] as default. Configuration
options: [Disabled], [0.5% Hershey], [0.75% Hershey], [0.5% Triangular],
and [0.75% Triangular].
PCIE Spread Spectrum
This feature will be set to [Enabled] as default. Configuration
options: [Disabled], and [Enabled].
SATA Spread Spectrum
This feature will be set to [Enabled] as default. Configuration
options: [Disabled], and [Enabled].
.................................................................................
Processor Maximum Multiplier
It will display Processor Maximum Multiplier for reference.
Processor Maximum Voltage
It will display Processor Maximum Voltage for reference.
Multiplier/Voltage Change
This item is set to [Auto] by default. If it is set to [Manual], you may adjust the
value of Processor Multiplier and Processor Voltage. However, it is recommended
to keep the default value for system stability.
Processor Multiplier
This item will show when “Multiplier/Voltage Change” is set to [Manual];
otherwise, it will be hidden. The range of the value depends on the CPU
you adopt on this motherboard. However, for system stability, it is not
recommended to adjust the value of this item.
Processor Voltage
This item will show when “Multiplier/Voltage Change” is set to [Manual];
otherwise, it will be hidden. The range of the value depends on the CPU
you adopt on this motherboard. However, for safety and system stability,
it is not recommended to adjust the value of this item.
Memory Clock
This item can be set by the code using [Auto]. You can set one of the
standard values as listed: [200 MHz (DDRII 400)], [266 MHz (DDRII 533)],
[333 MHz (DDRII 667)], and [400MHz (DDRII 800)].
Flexibility Option
The default value of this option is [Disabled]. It will allow better tolerance for
memory compatibility when it is set to [Enabled].
CAS Latency
Use this item to adjust the means of memory accessing. Configuration
options: [Auto], [2.0], [3.0], and [2.5]. The default value is [Auto].
TRAS
Use this to adjust TRAS values. Configuration options: [Auto], [5CLK], [6CLK],
[7CLK], [8CLK], [9CLK], [10CLK], [11CLK], [12CLK], [13CLK], [14CLK], and
[15CLK]. The default value is [Auto].
TRP
Use this to adjust TRP values. Configuration options: [Auto], [2CLK], [3CLK],
[4CLK], [5CLK], and [6CLK]. The default value is [Auto].
TRCD
Use this to adjust TRCD values. Configuration options: [Auto], [2CLK], [3CLK],
[4CLK], [5CLK], and [6CLK]. The default value is [Auto].
TRRD
Use this to adjust TRRD values. Configuration options: [Auto], [2T], [3T], and
[4T]. The default value is [Auto].
TRC
Use this to adjust TRC values. Configuration options: [7T] to [22T]. The
default value is [Auto].
MA Timing
Use this to adjust values for MA timing. Configuration options: [Auto], [2T],
[1T]. The default value is [Auto].
Burst Length
Burst length can be set to 8, 4 or 2 beats. 64 Bit Dq must use the 4 beats.
Bank Interleaving
Interleaving allows memory accesses to be spread out over banks on the
same node, or accross nodes, decreasing access contention.
Memory Hole
Use this item to enable or disable memory hole. The Default value is
[Disabled].
DDRII Initialization Mode
Configuration options: [Auto] and [Compatible]. The default value is [Auto].

[MaxT]

-------------------------- CHIPSET CONFIGURATION
....
CPU - NB Link Speed
This feature allows you selecting CPU to NB link frequency. Configuration
options: [Auto], [200 MHz], [400 MHz], [600 MHz], [800 MHz], and [1000
MHz].
CPU - NB Link Width
This feature allows you selecting CPU to NB link width. Configuration options:
[Auto], [8 bit], and [16 bit].
DRAM Voltage
Use this to select DRAM voltage. Configuration options: [Auto], [Ultra High],
[High], [Normal], and [Low]. The default value is [Auto].

[MaxT]

in allegato screen cpu configuration

[MaxT]

immagine di chipest setting

[isomen]

Disabilità i vari spread spectrum, fixa pci e pci-e, metti il molti HT a 4 e le ram a 333, adesso puoi iniziare a salire con l'fsb (inizialmente puoi fare 10 mhz, poi 4/5) e ogni volta fai un test veloce di stabilità, ai primi sintomi d'instabilità decidi se alzare il vcore (tenendo d'occhio le temp) o abbassare di qualche mhz e fermarti.
Al termine fai test approfonditi di stabilità.

;) CIAUZ

[MaxT]

fixa pci e pci-e, metti il molti HT


per impostare questi parametri su cosa agisco?

per il fixing imposto la modalità asincrona?
Per Ht non trovo LDT/FSB Frequency ratio

ps per il resto sei stato chiarissimo, grazie ;)

[isomen]

per impostare questi parametri su cosa agisco?

per il fixing imposto la modalità asincrona?
Per Ht non trovo LDT/FSB Frequency ratio

ps per il resto sei stato chiarissimo, grazie ;)

Si, per overclockare imposta:

[CPU, PCIE, Async.]

PCIE Frequency (a 100 o 101)

CPU - NB Link Speed (a 800 con bus fino a 250, 600 se vai oltre)

;) CIAUZ

[MaxT]

sale parecchio, sono ancora in fase di test.:)

grazie molte isomen ;)

[MaxT]

.

[isomen]

sale parecchio, sono ancora in fase di test.:)

grazie molte isomen ;)

Di niente... boun OC.

;) CIAUZ

[Lino P]

sale parecchio, sono ancora in fase di test.:)

grazie molte isomen ;)

non fidarti.. è 1 sprovveduto alle prime armi, rischi solo di far danni...:asd: :ahahah:

[isomen]

non fidarti.. è 1 sprovveduto alle prime armi, rischi solo di far danni...:asd: :ahahah:

E' vero... ed ho pure la percentuale sui pc che riesco a far bruciare :rotfl: :rotfl:

...e siccome riesco spesso nel mio intento :sbonk: offro da bere :cincin: :gluglu: :hic: :ubriachi:

;) CIAUZ

[Lino P]

grande iso... the AMD man...:D ;)