PDA

View Full Version : [Thread Ufficiale] Nec Optiarc 7203A/S


[RenderMAN]
23-05-2008, 22:22
http://www.sonynec-optiarc.eu/images/non_lang/navigation/logo_optiarc.gif 7203A/S SERIES
Ecco l'ultima creatura della joint venture NEC/SONY il modello 7203 nelle due varianti A (Eide/Atapi) ed S (Serial-ATA) l'unica differenza tra i due dunque è l'interfaccia di comunicazione, per il resto sono identici al 100%

The new Optiarc 20x DVD multi writer AD-7203A, with Labelflash™, open up new dimensions for flexible read, write and disc label functions.
This high-performance DVD/CD-burner is able to read your DVDs at a speed of 16x and CDs at 48x. It also brings fascinating dynamics into play when writing your blank disks. Now it can even write the DVD-R DL two layer format with 12x, while reaching a speed of up to 20x for DVD +R and DVD-R. DVD +R9 and +RWs are processed at 8x and DVD-RWs at 6x. And DVD-RAM can be recorded with up to 12x DVD speed. So how fast can it burn my CDs, you might ask? Even here, with speeds of 48x (CD-R) and 32x (CD-RW), it’s at the top of its class.



SPECIFICHE
Read Speed: DVD: 16x max. CD: 48x max.
Write Speed: DVD-R: 20x max. DVD +R: 20x max.
DVD-RW: 6x max. DVD +RW: 8x max.
DVD-R DL: 12x max. DVD +R9: 8x max.
DVD-RAM: 12x max.
CD-R: 48x max. CD-RW: 32x max.
Access time : DVD: 160 ms CD: 140 ms
Mechanism: Motorized tray load mechanism for horizontal and vertical use
Interface : E-IDE / ATAPI (in questo caso modello 7203A)
Burst transfer rate: PIO mode 4 / Ultra DMA 66 (in questo caso modello 7203A)
Cache: 2 MByte
Media supported: DVD-ROM, DVD-R (DL), DVD-RW (DL), DVD-RAM, DVD +R (DL), DVD +RW, CD-ROM, CD-R and CD-RW with 80mm and 120mm diameter
Modes supported: DVD-ROM, DVD-Video, CD-ROM, CD-ROM XA, CD-I Ready, CD-Bridge, PhotoCD, VideoCD, CD-DA, CD Extra, CD Text
Writing methods: DAO, SAO, TAO with zero gap, variable or fixed packet, multisession
Compatibility: MPC Level 3, MultiRead, PC2001
Weight: 0.69 kg
Dimensions : 148 mm x 42 mm x 170 mm
Special features: Labelflash™, dust protected enclosure,
buffer under run error prevention,
available colours: beige, black, silver

MODALITA' DI SCRITTURA (con Fw originali)
48xCDR CAV
32xCDRW ZCLV
20xDVD-R CAV
6xDVD-RW CLV
12xDVD-RDL CAV
20xDVD+R CAV
8xDVD+RW ZCLV
12xDVD+RDL CAV
12xDVD-RAM PCAV

Legenda:
CAV = Constant Angular Velocity, the DVD is written at a constantly increasing speed.
CLV = Constant Linear Velocity, the DVD is written at a constant speed.
ZCLV = Zone Constant Linear Velocity, the DVD is divided into zones. After each zone the write speed is increased.
PCAV = Partial Constant Angular Velocity, the DVD is being written at an increasing speed until a certain speed. After this speed it will not increase anymore.


HOME PAGE UFFICIALE (http://www.sonynec-optiarc.eu/en/exhibits/half-height-drives/ad-7203a)

F.A.Q. (http://www.sonynec-optiarc.eu/en/support-service/faqs2/generelle-probleme)

FIRMWARE UFFICIALI (http://www.sonynec-optiarc.eu/en/support-service/downloads/fw_dvd-writer-ad-series.html)


UN-Official Firmware by "Liggy's and Dee's"
I Nec da sempre sono supportati (in modo NON ufficiale ovviamente) da due grandi quali Liggy's and Dee's, partendo dal firmware originale essi sfornano firmware modificati ed ottimizzati per ogni nostra esigenza, a partire del Bitsetting...li consigli vivamente, sono ottimi e stabili tanto quanto quelli originali!
N.B. OVVIAMENTE SE DECIDETE DI USARE FIRMWARE NON UFFICIALI LO FATE A VOSTRO RISCHIO E PERICOLO, IL SOTTOSCRITTO NON SI ASSUME NESSUNA RESPONSABILITA' PER QUALSIASI DANNO NE POSSA DERIVARE


Liggy's and Dee's modified NEC and Optiarc firmwares (http://liggydee.cdfreaks.com/page/en/Optiarc-AD-7200A/)

Work in progres....SuL

provolinoo
24-05-2008, 12:00
Ho visto che il sito ufficiale riporta, per questo masterizzatore, una capacità di scrittura del supporti DVD+R DL di 8x mentre il sito di di Liggy and Dee dice che riesce a scriverli a 12x...

...è un errore di battitura oppure è il firmware moddato che in qualche modo sblocca tale velocità? :D

[RenderMAN]
24-05-2008, 13:25
Ho visto che il sito ufficiale riporta, per questo masterizzatore, una capacità di scrittura del supporti DVD+R DL di 8x mentre il sito di di Liggy and Dee dice che riesce a scriverli a 12x...

...è un errore di battitura oppure è il firmware moddato che in qualche modo sblocca tale velocità? :D

Confermo, spesso tra le modifiche vi è anche un incremento delle velocità, con la serie 45xx spesso burmanvo dei dvd mediocri certificati 8x @12 senza problemi.
Occhio a non esagerare però, + aumenti peggiore è la qualità di scrittura ovviamente.

provolinoo
24-05-2008, 16:42
;22594790']Confermo, spesso tra le modifiche vi è anche un incremento delle velocità, con la serie 45xx spesso burmanvo dei dvd mediocri certificati 8x @12 senza problemi.
Occhio a non esagerare però, + aumenti peggiore è la qualità di scrittura ovviamente.

Grazie per la risposta ;)

Io però mi riferivo alla capacità fisica del masterizzatore di raggiungere i 12x con i supporti DVD+R DL e non al fatto che il masterizzatore fosse in grado di scrivere i supporti ad una velocità maggiore di quella per cui sono certificati :)

[RenderMAN]
26-05-2008, 02:29
Grazie per la risposta ;)

Io però mi riferivo alla capacità fisica del masterizzatore di raggiungere i 12x con i supporti DVD+R DL e non al fatto che il masterizzatore fosse in grado di scrivere i supporti ad una velocità maggiore di quella per cui sono certificati :)

Perdonami ma hai le idee confuse!!!

E' esattamente la stessa cosa!
Come dici tu, scrivere OGGI "fisicamente" un DL @12X equivale di fatto ad un "Overspeed" (è in arrivo una mio guida completa...datemi ancora qualche giorno....), di fatto oggi NON ESISTE AL MONDO UN SOLO SUPPORTO DL CERTIFICATO 12x, (ALMENO CHE MI RISULTI,ma potrei sempre sbagliarmi, se esistono allora posta il link).

Detto questo ti dico che lo si può fare "in casa" (senza l'aiuto di nessuno) puoi cioè editare un Fw e decidere TU le velocità di Burning....aspetta la mia guida....manca poco.

provolinoo
26-05-2008, 14:26
;22615033']Perdonami ma hai le idee confuse!!!


Non ti preoccupare... è solo che non ci capiamo, io parlo di una cosa tu di un'altra ;)

Comunque tutto ok, sono riuscito a recuperare l'informazione che mi serviva girando su internet :)

08r-dc
12-07-2008, 21:52
comprato per usarlo come master esterno
ancora non l'ho provato ma sicuramente mi darà soddisfazioni...come il mio vecchio nec (3250? boh?)

p.s. in particolare sto cercando la possibilità di trasformarlo in lightscribe e non lableflash...