Ho installato tutto regolarmente sul mio pc una debian 4.0 etch r3 amd64 da netinstall, ora:
l'audio non c'è
la scheda di rete integrata sulla p5k non và
ho provato a cancellare e creare il mio account ma
1)
http://img291.imageshack.us/img291/3585/schermataey2.th.png (http://img291.imageshack.us/my.php?image=schermataey2.png)
2)
http://img254.imageshack.us/img254/5085/schermata1cb3.th.png (http://img254.imageshack.us/my.php?image=schermata1cb3.png)
3)
http://img291.imageshack.us/img291/502/schermata2yc7.th.png (http://img291.imageshack.us/my.php?image=schermata2yc7.png)
4)
http://img291.imageshack.us/img291/6957/schermata3ul8.th.png (http://img291.imageshack.us/my.php?image=schermata3ul8.png)
5)
http://img254.imageshack.us/img254/9995/schermata4vc9.th.png (http://img254.imageshack.us/my.php?image=schermata4vc9.png)
6)
http://img206.imageshack.us/img206/4089/schermata5fg8.th.png (http://img206.imageshack.us/my.php?image=schermata5fg8.png)
e non vado più avanti. Per la rete invece, come dice il readme
. Move the base driver tar file to the directory of your choice. For example,
use /home/username/atl1 or /usr/local/src/atl1.
2. Untar/unzip archive:
tar zxf atl1-x.x.x.tar.gz
3. Change to the driver src directory:
cd atl1-x.x.x/src/
4. Compile the driver module:
make install
ma mi succede questo, nell'atto di eseguire il make
Makefile:65**Linux kernel source not found
:mc: :mc: :mc: :mc: :mc: :mc: :mc:
non ho capito il motivo della cancellazione dell'account. cmq probabilmente x l'audio devi aprire il mixer e abilitare l'audio sul front (una volta la debian aveva fregato anke me). x la rete non capisco dove sia il problema xkè dall'immagine 5 si vede ke stai scaricando il source del kernel da internet.
non ho capito il motivo della cancellazione dell'account. cmq probabilmente x l'audio devi aprire il mixer e abilitare l'audio sul front (una volta la debian aveva fregato anke me). x la rete non capisco dove sia il problema xkè dall'immagine 5 si vede ke stai scaricando il source del kernel da internet.
allora li stò usando una scheda di rete a parte, da windows e da linux (eccetto debian) ho sempre usato l'adattatore di rete della p5k
allora li stò usando una scheda di rete a parte, da windows e da linux (eccetto debian) ho sempre usato l'adattatore di rete della p5k
se hai installato il source quell'errore non ha senso. vedi un po nel readme se devi passare qualke dato al configure, magari non riesce a trovare i sorgenti.
quasi risolto...
debian:/home/matteo/Desktop/Attansic/src# make install
make -C /lib/modules/2.6.18-6-amd64/build SUBDIRS=/home/matteo/Desktop/Attansic/src modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.18-6-amd64'
CC [M] /home/matteo/Desktop/Attansic/src/at_main.o
In file included from /home/matteo/Desktop/Attansic/src/at_main.c:1:
/home/matteo/Desktop/Attansic/src/at.h:10:5: warning: "AUTO" is not defined
/home/matteo/Desktop/Attansic/src/at.h:82:5: warning: "DBG" is not defined
/home/matteo/Desktop/Attansic/src/at_main.c:109: warning: initialization from incompatible pointer type
CC [M] /home/matteo/Desktop/Attansic/src/at_hw.o
In file included from /home/matteo/Desktop/Attansic/src/at_hw.c:1:
/home/matteo/Desktop/Attansic/src/at.h:10:5: warning: "AUTO" is not defined
/home/matteo/Desktop/Attansic/src/at.h:82:5: warning: "DBG" is not defined
CC [M] /home/matteo/Desktop/Attansic/src/at_param.o
In file included from /home/matteo/Desktop/Attansic/src/at_param.c:1:
/home/matteo/Desktop/Attansic/src/at.h:10:5: warning: "AUTO" is not defined
/home/matteo/Desktop/Attansic/src/at.h:82:5: warning: "DBG" is not defined
CC [M] /home/matteo/Desktop/Attansic/src/at_test.o
In file included from /home/matteo/Desktop/Attansic/src/at_test.c:1:
/home/matteo/Desktop/Attansic/src/at.h:10:5: warning: "AUTO" is not defined
/home/matteo/Desktop/Attansic/src/at.h:82:5: warning: "DBG" is not defined
CC [M] /home/matteo/Desktop/Attansic/src/kcompat.o
CC [M] /home/matteo/Desktop/Attansic/src/at_ethtool.o
In file included from /home/matteo/Desktop/Attansic/src/at_ethtool.c:1:
/home/matteo/Desktop/Attansic/src/at.h:10:5: warning: "AUTO" is not defined
/home/matteo/Desktop/Attansic/src/at.h:82:5: warning: "DBG" is not defined
LD [M] /home/matteo/Desktop/Attansic/src/atl1.o
Building modules, stage 2.
MODPOST
CC /home/matteo/Desktop/Attansic/src/atl1.mod.o
LD [M] /home/matteo/Desktop/Attansic/src/atl1.ko
make[1]: Leaving directory `/usr/src/linux-headers-2.6.18-6-amd64'
gzip -c ../atl1.7 > atl1.7.gz
# remove all old versions of the driver
find /lib/modules/2.6.18-6-amd64 -name atl1.ko -exec rm -f {} \; || true
find /lib/modules/2.6.18-6-amd64 -name atl1.ko.gz -exec rm -f {} \; || true
install -D -m 644 atl1.ko /lib/modules/2.6.18-6-amd64/kernel/drivers/net/atl1/atl1.ko
/sbin/depmod -a || true
install -D -m 644 atl1.7.gz /usr/share/man/man7/atl1.7.gz
man -c -P'cat > /dev/null' atl1 || true
man:
impossibile scrivere in /var/cache/man/cat7/atl1.7.gz in modo catman
atl1.
debian:/home/matteo/Desktop/Attansic/src#
jeremy.83
17-05-2008, 08:55
Mi sembra solo un errore legato al manuale dei comandi, quindi in teoria, nonostante i warning, dovrebbe aver installato.
Ma se vuoi un ambiente desktop, etch non è adatto, meglio se l'aggiorni a sid o almeno a lenny, che dovrebbe riconoscere almeno la periferica di rete out of the box. Il 2.6.18 è uscito 2 anni fa se non ricordo male e moltissimo hw di sistemi moderni non riesce a rilevarlo.
Anche vero che senza rete attiva è impossibile l'aggiornamento, quindi se vuoi aggiornare riscarica la iso e reinstalla il tutto.
Ciao.
Mi sembra solo un errore legato al manuale dei comandi, quindi in teoria, nonostante i warning, dovrebbe aver installato.
Ma se vuoi un ambiente desktop, etch non è adatto, meglio se l'aggiorni a sid o almeno a lenny, che dovrebbe riconoscere almeno la periferica di rete out of the box. Il 2.6.18 è uscito 2 anni fa se non ricordo male e moltissimo hw di sistemi moderni non riesce a rilevarlo.
Anche vero che senza rete attiva è impossibile l'aggiornamento, quindi se vuoi aggiornare riscarica la iso e reinstalla il tutto.
Ciao.
l'audio và, ho messo i alsa-driver 1.0.16,per la rete ancora no..ci deve essere un modo per risolvere:muro:
Shang Tsung
17-05-2008, 15:12
Ciao, sinceramente non ci ho capito nulla di quello che hai detto, in particolar modo del cancellare l'account.
Comunque, non importa, postaci un bel lspci -v
Ciao, sinceramente non ci ho capito nulla di quello che hai detto, in particolar modo del cancellare l'account.
Comunque, non importa, postaci un bel lspci -v
:)
debian4400:/home/matteo# lspci -v
00:00.0 Host bridge: Intel Corporation Unknown device 29c0 (rev 02)
Subsystem: ASUSTeK Computer Inc. Unknown device 8276
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information
00:01.0 PCI bridge: Intel Corporation Unknown device 29c1 (rev 02) (prog-if 00 [ Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe800000-fe8fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Capabilities: [88] Subsystem: ASUSTeK Computer Inc. Unknown device 8276
Capabilities: [80] Power Management version 3
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Capabilities: [a0] Express Root Port (Slot+) IRQ 0
00:1a.0 USB Controller: Intel Corporation Unknown device 2937 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device 8277
Flags: bus master, medium devsel, latency 0, IRQ 169
I/O ports at b800 [size=32]
Capabilities: [50] Vendor Specific Information
00:1a.1 USB Controller: Intel Corporation Unknown device 2938 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device 8277
Flags: bus master, medium devsel, latency 0, IRQ 225
I/O ports at b880 [size=32]
Capabilities: [50] Vendor Specific Information
00:1a.2 USB Controller: Intel Corporation Unknown device 2939 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device 8277
Flags: bus master, medium devsel, latency 0, IRQ 233
I/O ports at bc00 [size=32]
Capabilities: [50] Vendor Specific Information
00:1a.7 USB Controller: Intel Corporation Unknown device 293c (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device 8277
Flags: bus master, medium devsel, latency 0, IRQ 233
Memory at fe7ffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port
Capabilities: [98] Vendor Specific Information
00:1b.0 Audio device: Intel Corporation Unknown device 293e (rev 02)
Subsystem: ASUSTeK Computer Inc. Unknown device 829f
Flags: bus master, fast devsel, latency 0, IRQ 58
Memory at fe7f8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Capabilities: [70] Express Unknown type IRQ 0
00:1c.0 PCI bridge: Intel Corporation Unknown device 2940 (rev 02) (prog-if 00 [ Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Unknown device 8277
Capabilities: [a0] Power Management version 2
00:1c.4 PCI bridge: Intel Corporation Unknown device 2948 (rev 02) (prog-if 00 [ Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Unknown device 8277
Capabilities: [a0] Power Management version 2
00:1c.5 PCI bridge: Intel Corporation Unknown device 294a (rev 02) (prog-if 00 [ Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: fe900000-fe9fffff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Unknown device 8277
Capabilities: [a0] Power Management version 2
00:1d.0 USB Controller: Intel Corporation Unknown device 2934 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device 8277
Flags: bus master, medium devsel, latency 0, IRQ 50
I/O ports at b080 [size=32]
Capabilities: [50] Vendor Specific Information
00:1d.1 USB Controller: Intel Corporation Unknown device 2935 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device 8277
Flags: bus master, medium devsel, latency 0, IRQ 66
I/O ports at b400 [size=32]
Capabilities: [50] Vendor Specific Information
00:1d.2 USB Controller: Intel Corporation Unknown device 2936 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device 8277
Flags: bus master, medium devsel, latency 0, IRQ 233
I/O ports at b480 [size=32]
Capabilities: [50] Vendor Specific Information
00:1d.7 USB Controller: Intel Corporation Unknown device 293a (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device 8277
Flags: bus master, medium devsel, latency 0, IRQ 50
Memory at fe7ff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port
Capabilities: [98] Vendor Specific Information
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) (prog-if 01 [Sub tractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Capabilities: [50] Subsystem: ASUSTeK Computer Inc. Unknown device 8277
00:1f.0 ISA bridge: Intel Corporation Unknown device 2918 (rev 02)
Subsystem: ASUSTeK Computer Inc. Unknown device 8277
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information
00:1f.2 IDE interface: Intel Corporation Unknown device 2921 (rev 02) (prog-if 8 f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Unknown device 8277
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 58
I/O ports at a000 [size=8]
I/O ports at 9c00 [size=4]
I/O ports at 9880 [size=8]
I/O ports at 9800 [size=4]
I/O ports at 9480 [size=16]
I/O ports at 9400 [size=16]
Capabilities: [70] Power Management version 3
Capabilities: [b0] Vendor Specific Information
00:1f.3 SMBus: Intel Corporation Unknown device 2930 (rev 02)
Subsystem: ASUSTeK Computer Inc. Unknown device 8277
Flags: medium devsel, IRQ 233
Memory at fe7ff400 (64-bit, non-prefetchable) [size=256]
I/O ports at 0400 [size=32]
00:1f.5 IDE interface: Intel Corporation Unknown device 2926 (rev 02) (prog-if 8 5 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Unknown device 8277
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 58
I/O ports at b000 [size=8]
I/O ports at ac00 [size=4]
I/O ports at a880 [size=8]
I/O ports at a800 [size=4]
I/O ports at a480 [size=16]
I/O ports at a400 [size=16]
Capabilities: [70] Power Management version 3
Capabilities: [b0] Vendor Specific Information
01:00.0 VGA compatible controller: ATI Technologies Inc Unknown device 7288 (pro g-if 00 [VGA])
Subsystem: PC Partner Limited Unknown device e190
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at d0000000 (32-bit, prefetchable) [size=256M]
I/O ports at c000 [size=256]
Memory at fe8e0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at fe8c0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Express Legacy Endpoint IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
01:00.1 Display controller: ATI Technologies Inc Unknown device 72a8
Subsystem: PC Partner Limited Unknown device e191
Flags: bus master, fast devsel, latency 0
Memory at fe8f0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Express Endpoint IRQ 0
02:00.0 Ethernet controller: Unknown device 1969:1048 (rev b0)
Subsystem: ASUSTeK Computer Inc. Unknown device 8226
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at fe9c0000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at fe9a0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2
Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Capabilities: [58] Express Endpoint IRQ 0
03:00.0 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Contr oller (rev 03) (prog-if 01 [PriO])
Subsystem: ASUSTeK Computer Inc. Unknown device 824f
Flags: bus master, fast devsel, latency 0, IRQ 169
Memory at feafe000 (32-bit, non-prefetchable) [size=8K]
Expansion ROM at feae0000 [disabled] [size=64K]
Capabilities: [68] Power Management version 2
Capabilities: [50] Express Legacy Endpoint IRQ 1
03:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Contr oller (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Unknown device 824f
Flags: bus master, fast devsel, latency 0, IRQ 177
I/O ports at dc00 [size=8]
I/O ports at d880 [size=4]
I/O ports at d800 [size=8]
I/O ports at d480 [size=4]
I/O ports at d400 [size=16]
Capabilities: [68] Power Management version 2
05:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139 C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Flags: bus master, medium devsel, latency 64, IRQ 233
I/O ports at e800 [size=256]
Memory at febffc00 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
05:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller ( rev c0) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device 81fe
Flags: bus master, medium devsel, latency 64, IRQ 169
Memory at febff000 (32-bit, non-prefetchable) [size=2K]
I/O ports at ec00 [size=128]
Capabilities: [50] Power Management version 2
debian4400:/home/matteo#
vBulletin® v3.6.4, Copyright ©2000-2025, Jelsoft Enterprises Ltd.