Prezioso
12-04-2008, 22:34
Ciao a tutti...
non so se il masterizzatore si sia rotto, magari potete dirmelo dal log....oggi mentre masterizzavo è andata via la corrente....
ho riprovato dopo un pò....ad un certo punto nero si è tipo impallato(colpa mia forse ho aperto msn:D ) e mi ha bruciato di nuovo il dvd dl....
esco per comprarne uno nuovo.....MA DIVERSO dal solito......
zac! non parte proprio la masterizzazione, mi da l'errore impossibile masterizzare disc at one....e non mi da la possibilità NE di simulare una possibile masterizzazione NE di cambiare a track at one....
ho subito pensato, è andato alla frutta il masterizzatore per via della corrente andata via.....e invece ho masterizzato cd e dvd 4.7 senza problemi anche in disc at one.....
l'errore è questo....
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programmi\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28/07/2004 16.51.12
Versione Nero: 6.6.0.0 (Nero Express)
Masterizzatore: <HL-DT-ST DVDRAM GSA-4163B>Versione: A105 - HA 0 TA 1 - 6.6.0.0
Driver Adattatore: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Versione: 0L23 - HA 0 TA 0 - 6.6.0.0
Driver Adattatore: <atapi> HA 0
=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 0 ID 1 DMA: On
DiskPeripheral : Maxtor 6B300S0 nvata Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8163 G: CDRom0
HL-DT-ST DVDRAM GSA-4163 H: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2046MB (2095532kB)
Free physical memory: 1482MB (1518132kB)
Memory in use : 27 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
12.4.2008
Scrivi Immagine DVD
22.27.58 #1 Text 0 File Burncd.cpp, Line 2834
HL-DT-ST DVDRAM GSA-4163B
Protezione buffer underrun attivato
22.27.58 #2 Text 0 File Reader.cpp, Line 127
Reader running
22.27.58 #3 Text 0 File Burncd.cpp, Line 3119
Turn on Disc-at-once, using DVD media
22.27.58 #4 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 3867845 (859:31.20, 7554MB)
22.27.58 #5 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
22.27.58 #6 Text 0 File DlgWaitCD.cpp, Line 2310
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: CMC MAG, Media Type ID: D03, Product revision number: 64
Disc Application Code: 0, Extended Information Indicators: 3
22.27.58 #7 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
22.27.58 #8 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Modalità 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 3867846 (3867846) = #3867846/859:31.21
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3867846 blocks [HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------
22.27.58 #9 Text 0 File ThreadedTransferInterface.cpp, Line 1045
Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 7921348608, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
3867846 | lead-out | 1 | 0x00 | 0x41
22.27.58 #10 Phase 24 File dlgbrnst.cpp, Line 1861
Inizio ottimizzazione file
22.27.58 #11 Text 0 File Burncd.cpp, Line 4135
Cache writing successful.
22.27.58 #12 Phase 25 File dlgbrnst.cpp, Line 1861
Ottimizzazione file completata
22.27.58 #13 Phase 36 File dlgbrnst.cpp, Line 1861
Inizio scrittura a 2,4x (3.324 KB/s)
22.27.58 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2471
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
22.27.58 #15 Text 0 File DVDPlusDualLayer.cpp, Line 383
Disc finalized, LBA total Image size: 3867846 (7554MB), Last LBA L0: 1933935 (3777MB)
22.28.00 #16 SCSI -1135 File Cdrdrv.cpp, Line 1175
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x03B26000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0xBF 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x0C 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x35 0x2D 0x00 0x0E 0x0C 0x00
22.28.00 #17 Text 0 File DVDPlusDualLayer.cpp, Line 465
L0 Data Zone Capacity set to 1933936 (1D8270h, 3777MB) -> ERROR, capacity different:
L0 Data Zone Capacity on disc: 2086912 (1FD800h, 4076MB)
L0 Data Zone Capacity requested to be set: 1933936 (1D8270h, 3777MB)
22.28.00 #18 CDR -1135 File ThreadedTransferInterface.cpp, Line 1676
Errore di scrittura
22.28.00 #19 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1676
Non è possibile utilizzare il Disc At Once
22.28.00 #20 Text 0 File dlgbrnst.cpp, Line 1719
Set remaining time: 0:00,000 (0ms) -> OK
22.28.00 #21 Phase 38 File dlgbrnst.cpp, Line 1861
Scrittura fallita a 2,4x (3.324 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9464 bytes, created 08/03/2007 1.51.00
File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 08/03/2007 1.51.00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 22.59.44 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
so ke posso provare a cambiare supporto ma fino a lunedì sono in pensieroooooo.....mi sapete dire se già è alla frutta il master dal log?
non so se il masterizzatore si sia rotto, magari potete dirmelo dal log....oggi mentre masterizzavo è andata via la corrente....
ho riprovato dopo un pò....ad un certo punto nero si è tipo impallato(colpa mia forse ho aperto msn:D ) e mi ha bruciato di nuovo il dvd dl....
esco per comprarne uno nuovo.....MA DIVERSO dal solito......
zac! non parte proprio la masterizzazione, mi da l'errore impossibile masterizzare disc at one....e non mi da la possibilità NE di simulare una possibile masterizzazione NE di cambiare a track at one....
ho subito pensato, è andato alla frutta il masterizzatore per via della corrente andata via.....e invece ho masterizzato cd e dvd 4.7 senza problemi anche in disc at one.....
l'errore è questo....
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programmi\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28/07/2004 16.51.12
Versione Nero: 6.6.0.0 (Nero Express)
Masterizzatore: <HL-DT-ST DVDRAM GSA-4163B>Versione: A105 - HA 0 TA 1 - 6.6.0.0
Driver Adattatore: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Versione: 0L23 - HA 0 TA 0 - 6.6.0.0
Driver Adattatore: <atapi> HA 0
=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 0 ID 1 DMA: On
DiskPeripheral : Maxtor 6B300S0 nvata Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8163 G: CDRom0
HL-DT-ST DVDRAM GSA-4163 H: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2046MB (2095532kB)
Free physical memory: 1482MB (1518132kB)
Memory in use : 27 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
12.4.2008
Scrivi Immagine DVD
22.27.58 #1 Text 0 File Burncd.cpp, Line 2834
HL-DT-ST DVDRAM GSA-4163B
Protezione buffer underrun attivato
22.27.58 #2 Text 0 File Reader.cpp, Line 127
Reader running
22.27.58 #3 Text 0 File Burncd.cpp, Line 3119
Turn on Disc-at-once, using DVD media
22.27.58 #4 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 3867845 (859:31.20, 7554MB)
22.27.58 #5 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
22.27.58 #6 Text 0 File DlgWaitCD.cpp, Line 2310
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: CMC MAG, Media Type ID: D03, Product revision number: 64
Disc Application Code: 0, Extended Information Indicators: 3
22.27.58 #7 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
22.27.58 #8 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Modalità 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 3867846 (3867846) = #3867846/859:31.21
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3867846 blocks [HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------
22.27.58 #9 Text 0 File ThreadedTransferInterface.cpp, Line 1045
Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 7921348608, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
3867846 | lead-out | 1 | 0x00 | 0x41
22.27.58 #10 Phase 24 File dlgbrnst.cpp, Line 1861
Inizio ottimizzazione file
22.27.58 #11 Text 0 File Burncd.cpp, Line 4135
Cache writing successful.
22.27.58 #12 Phase 25 File dlgbrnst.cpp, Line 1861
Ottimizzazione file completata
22.27.58 #13 Phase 36 File dlgbrnst.cpp, Line 1861
Inizio scrittura a 2,4x (3.324 KB/s)
22.27.58 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2471
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
22.27.58 #15 Text 0 File DVDPlusDualLayer.cpp, Line 383
Disc finalized, LBA total Image size: 3867846 (7554MB), Last LBA L0: 1933935 (3777MB)
22.28.00 #16 SCSI -1135 File Cdrdrv.cpp, Line 1175
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x03B26000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0xBF 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x0C 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x35 0x2D 0x00 0x0E 0x0C 0x00
22.28.00 #17 Text 0 File DVDPlusDualLayer.cpp, Line 465
L0 Data Zone Capacity set to 1933936 (1D8270h, 3777MB) -> ERROR, capacity different:
L0 Data Zone Capacity on disc: 2086912 (1FD800h, 4076MB)
L0 Data Zone Capacity requested to be set: 1933936 (1D8270h, 3777MB)
22.28.00 #18 CDR -1135 File ThreadedTransferInterface.cpp, Line 1676
Errore di scrittura
22.28.00 #19 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1676
Non è possibile utilizzare il Disc At Once
22.28.00 #20 Text 0 File dlgbrnst.cpp, Line 1719
Set remaining time: 0:00,000 (0ms) -> OK
22.28.00 #21 Phase 38 File dlgbrnst.cpp, Line 1861
Scrittura fallita a 2,4x (3.324 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9464 bytes, created 08/03/2007 1.51.00
File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 08/03/2007 1.51.00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 22.59.44 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
so ke posso provare a cambiare supporto ma fino a lunedì sono in pensieroooooo.....mi sapete dire se già è alla frutta il master dal log?