Maxell
08-03-2008, 10:32
Ciao a tutti
devo masterizzare Vista64 (in file .iso) su DVD
Il file .iso è grosso però 4,42 GB quindi nella schermata di nero burn. mi va oltre i 4489 MB richiesti massimali!!!!
Ho provato a spuntare l'opzione Disc At Once a 4500/4550 ma quando seleziono "scrivi" dopo un paio di secondi mi esce questo:
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.8.5.0
Internal Version: 7, 8, 5, 0
Recorder: <HL-DT-ST DVDRAM GSA-4120B>Version: A117 - HA 1 TA 0 - 7.8.5.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVDRAM GSA-4120B>Version: A117 - HA 1 TA 0 - 7.8.5.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4120B atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616Q atapi Port 0 ID 1 DMA: On
DiskPeripheral : WDC WD1500ADFD-00NLR1 atapi Port 1 ID 0 DMA: On
DiskPeripheral : Maxtor 6B300S0 BANC SI3114r Port 2 ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y120M0 YAR5 SI3114r Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4120B E: CDRom0
SAMSUNG DVD-ROM SD-616Q F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048044kB)
Free physical memory: 362MB (370884kB)
Memory in use : 64 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
8.3.2008
Scrivi Immagine DVD
11.31.23 #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
11.31.23 #2 Text 0 File Burncd.cpp, Line 3499
Turn on Disc-At-Once, using DVD media
11.31.27 #3 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2329599 (517:41.24, 4549MB), real: 4489MB
Last address to be written: 2320154 (515:35.29, 4531MB)
11.31.27 #4 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: YES (enabled: CD DVD)
11.31.27 #5 Text 0 File DlgWaitCD.cpp, Line 2949
Recorder: HL-DT-ST DVDRAM GSA-4120B, Media type: DVD-R
Disc Manufacturer: FUJIFI - LM03
Disc Application Code: 64, Disc Physical Code: 193
11.31.27 #6 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Not enough free discspace.
(Medium in drive: DVD-R. Medium required by compilation: DVD R/RW; DVD-RAM; DVD+R DL.)
Data to be written: 0 byte (0 byte)
Space available on the disc: 0 byte (0 byte)
11.31.27 #7 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Modalità 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2320155 (2320155) = #2320155/515:35.30
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2320155 blocks [E: HL-DT-ST DVDRAM GSA-4120B]
--------------------------------------------------------------
11.31.27 #8 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: HL-DT-ST DVDRAM GSA-4120B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4751677440, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2320155 | 2320155 | 0x00
2320155 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
11.31.27 #9 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
11.31.28 #10 Text 0 File Burncd.cpp, Line 4278
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
11.31.28 #11 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started
11.31.28 #12 Text 0 File Burncd.cpp, Line 4397
Cache writing successful.
11.31.28 #13 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed
11.31.28 #14 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 8x (11.080 KB/s)
11.31.28 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
11.31.28 #16 Text 0 File DVDR.cpp, Line 3192
Recording mode: Sequential Recording Mode
11.31.28 #17 Text 0 File DVDR.cpp, Line 3348
Start write address at LBA 0
DVD high compatibility mode: Yes
11.31.28 #18 Text 0 File Cdrdrv.cpp, Line 9859
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: -
Revision number of minimum recording speed: -
Revision number table of recording speed: - - - - - - -
Class: 0
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
11.31.28 #19 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x53 00 00 00 00 00 23 67 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 10 53 00 00 0C 24 00 00 C0 00 05
11.31.28 #20 CDR -1066 File ThreadedTransferInterface.cpp, Line 1752
Invalid field in command
E: HL-DT-ST DVDRAM GSA-4120B
11.31.28 #21 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1752
Could not perform start of Disc-at-once
11.31.28 #22 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
11.31.28 #23 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 8x (11.080 KB/s)
11.31.28 #24 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
11.31.31 #25 Text 0 File Cdrdrv.cpp, Line 11214
DriveLocker: UnLockVolume completed
11.31.31 #26 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
...Si puo risolvere secondo voi??Grazie!!!
devo masterizzare Vista64 (in file .iso) su DVD
Il file .iso è grosso però 4,42 GB quindi nella schermata di nero burn. mi va oltre i 4489 MB richiesti massimali!!!!
Ho provato a spuntare l'opzione Disc At Once a 4500/4550 ma quando seleziono "scrivi" dopo un paio di secondi mi esce questo:
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.8.5.0
Internal Version: 7, 8, 5, 0
Recorder: <HL-DT-ST DVDRAM GSA-4120B>Version: A117 - HA 1 TA 0 - 7.8.5.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVDRAM GSA-4120B>Version: A117 - HA 1 TA 0 - 7.8.5.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4120B atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616Q atapi Port 0 ID 1 DMA: On
DiskPeripheral : WDC WD1500ADFD-00NLR1 atapi Port 1 ID 0 DMA: On
DiskPeripheral : Maxtor 6B300S0 BANC SI3114r Port 2 ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y120M0 YAR5 SI3114r Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4120B E: CDRom0
SAMSUNG DVD-ROM SD-616Q F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048044kB)
Free physical memory: 362MB (370884kB)
Memory in use : 64 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
8.3.2008
Scrivi Immagine DVD
11.31.23 #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
11.31.23 #2 Text 0 File Burncd.cpp, Line 3499
Turn on Disc-At-Once, using DVD media
11.31.27 #3 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2329599 (517:41.24, 4549MB), real: 4489MB
Last address to be written: 2320154 (515:35.29, 4531MB)
11.31.27 #4 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: YES (enabled: CD DVD)
11.31.27 #5 Text 0 File DlgWaitCD.cpp, Line 2949
Recorder: HL-DT-ST DVDRAM GSA-4120B, Media type: DVD-R
Disc Manufacturer: FUJIFI - LM03
Disc Application Code: 64, Disc Physical Code: 193
11.31.27 #6 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Not enough free discspace.
(Medium in drive: DVD-R. Medium required by compilation: DVD R/RW; DVD-RAM; DVD+R DL.)
Data to be written: 0 byte (0 byte)
Space available on the disc: 0 byte (0 byte)
11.31.27 #7 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Modalità 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2320155 (2320155) = #2320155/515:35.30
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2320155 blocks [E: HL-DT-ST DVDRAM GSA-4120B]
--------------------------------------------------------------
11.31.27 #8 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: HL-DT-ST DVDRAM GSA-4120B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4751677440, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2320155 | 2320155 | 0x00
2320155 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
11.31.27 #9 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
11.31.28 #10 Text 0 File Burncd.cpp, Line 4278
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
11.31.28 #11 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started
11.31.28 #12 Text 0 File Burncd.cpp, Line 4397
Cache writing successful.
11.31.28 #13 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed
11.31.28 #14 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 8x (11.080 KB/s)
11.31.28 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
11.31.28 #16 Text 0 File DVDR.cpp, Line 3192
Recording mode: Sequential Recording Mode
11.31.28 #17 Text 0 File DVDR.cpp, Line 3348
Start write address at LBA 0
DVD high compatibility mode: Yes
11.31.28 #18 Text 0 File Cdrdrv.cpp, Line 9859
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: -
Revision number of minimum recording speed: -
Revision number table of recording speed: - - - - - - -
Class: 0
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
11.31.28 #19 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x53 00 00 00 00 00 23 67 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 10 53 00 00 0C 24 00 00 C0 00 05
11.31.28 #20 CDR -1066 File ThreadedTransferInterface.cpp, Line 1752
Invalid field in command
E: HL-DT-ST DVDRAM GSA-4120B
11.31.28 #21 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1752
Could not perform start of Disc-at-once
11.31.28 #22 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
11.31.28 #23 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 8x (11.080 KB/s)
11.31.28 #24 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
11.31.31 #25 Text 0 File Cdrdrv.cpp, Line 11214
DriveLocker: UnLockVolume completed
11.31.31 #26 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
...Si puo risolvere secondo voi??Grazie!!!