PDA

View Full Version : [MI + S.S.] MS-6163 Pro ver.2.0 con SDRAM e Intel 600MhZ


Papero63
07-03-2008, 06:55
Scheda madre con Processore Intel 600mhZ e dissy , Sdram 256 MB , il tutto funzionante e testato ! cedo a 20 EUR + SS.

:sofico:

CPU

• Support Slot 1 for Intel® Pentium® II/III or Celeron™ Processor
• Supports 233MHz~700MHz


Chipset

• Intel® 82433BX Chipset
• Intel® 82371EB Chipset


FSB

• 66~155MHz clocks are supported.
(According to product specification, FSB above 100MHz is not guaranteed to work properly with your CPU)



Main Memory

• Supports four 168-pin unbuffered DIMM using eight memory banks.
• Supports a maximum memory size of 348MB (8M• 8) or 768MB (16M• 4) registered DIMM
only
• Support ECC (1-bit Error Code Correct) function
• Supports 3.3v PC100 SDRAM DIMM.



Slots

• One AGP (Accelerated Graphics Port) slot.
- AGP specification compliant
- AGP 66/133MHz 3.3v device support
• Six 32-bit Master PCI Bus slots and one 16-bit ISA Bus slot wherein one shared slot can be
used as ISA or PCI
• Supports 3.3v/5v PCI Bus Interface.


On-Board IDE

• An IDE controller on the Intel® 82371EB PCI Chipset provides IDE HDD/CD-ROM with PIO,
Bus Master and Ultra DMA 33 operation modes.
• Can connect up to four IDE devices.


Audio

• Creative® ES1373 Chipset
- 64-voice and AC3 Capable
- Running on PCI Bus
- Direct Sound Hardware Accelerator
- Direct Music Hardware Accelerator
- AC97® Compliant



On-Board Peripherals

• On-Board Peripherals include:
- 1 Floppy port supports 2 FDD with 360K, 720K, 1.2M, 1.44M and 2.88Mbytes.
- 2 Serial ports (COM A + COM B)
- 1 Parallel port supports SPP/EPP/ECP mode
- 2 USB ports
- 1 IrDA connector for SIR

Papero63
08-03-2008, 13:34
UP