PDA

View Full Version : MSI P7N SLI Platinum S775 nForce 750i


stugots
29-01-2008, 16:55
MSI P7N SLI Platinum S775 nForce 750i

Questo è quello che ho trovato in rete riguardo questa mobo...

http://i248.photobucket.com/albums/gg164/caccamolotto/prod_7c8408143a84df73dca883e10ec201.jpg


CPU

* Supports Socket 775 for Intel® Core 2 Extreme, Core 2 Quad, Core 2 Duo, P4, P4EE, Pentium D, Pentium XE processors
* Supports FSB 1333/1066/800/533MHz.
* Supports EIST technology.
* Supports Intel® Hyper-Threading technology.


MSI Reminds you...
1. NVIDIA nForce Series boards DO NOT support Windows® 98/ME
2. SLI Technology only supports 32-bit and 64-bit Windows XP
3. For the best performance and commitment of convenience, please use memories listed in MSI approved memory module vendor list (Please check memory test report), which provides the easiest, up-to-date memory configurations.

Chipset

* NVIDIA® nForce 750i SLI (C72P) Chipset
* NVIDIA® nForce 430i (MCP51) Chipset

Main Memory

* Supports dual channel DDR2 533/667/800, using four 240-pin/1.8V DDR2 DIMMs.
* Supports a maximum memory size up to 8GB

Slots

* Three PCI Express x16 slots
o the mazarine slot PCI Express x 16 slot (PCI_E1) supports PCIE 2.0 x 16 mode.
o the two light-blue PCI Express x 16 slots (PCI_E2 & PCI_E3) support PCI Express x 8 mode only.
o supports SLI technology.
* Two 32-bit v2.3 Master PCI bus slots (support 3.3v/5v PCI bus interface)

On-Board IDE

* An IDE controller on the NVIDIA® nForce430i chipset provides IDE HDD/CD-ROM with PIO, Bus Master and Ultra DMA133/100/66 operation modes.
o Can connect up to 4 IDE devices.

On-Board SATA

* nForce 430i supports 4 SATA II ports (SATA 1 to 4).
o Transfer rate is up to 300 MB/s.
o 2 eSATA port by JMicron JMB363 (back panel, optional)
* NV RAID
o 4 SATA ports support RAID 0, 1, 0+1, 5 or JBOD is supported
o 2 eSATA ports (back panel) support RAID 0/1 mode

http://i248.photobucket.com/albums/gg164/caccamolotto/slide_6.jpg

il prezzo si aggira dai 110 ai 130 euri....
che ne pensate?

Fatality
30-01-2008, 13:56
è un ottima mobo,probabilmente il migliore compromesso per un utente che vuole avere compatibilità con lo SLI e le nuove CPU a 45nm,senza svenarsi.

Se solo si trovasse in italia... ancora irreperibile

Boscagoo
30-01-2008, 21:39
è un ottima mobo,probabilmente il migliore compromesso per un utente che vuole avere compatibilità con lo SLI e le nuove CPU a 45nm,senza svenarsi.

Se solo si trovasse in italia... ancora irreperibile

beh, non penso che escano tra molto ;) l'unico difetto è che supportano le ram fino a 800mhz, pensavo di più :stordita:

Edit: Spostiamoci su questo 3d: http://www.hwupgrade.it/forum/showthread.php?t=1664466