Gerringer
24-11-2007, 03:46
salve
ho letto un po di topic sia qui, sia su altri forum sia su google ma niente di fatto
premettendo che non è colpa di gparted come successo ad alcuni xchè nel mio caso NON E' PRESENTE il file usr/share/hal/fdi/policy/gparted-disable-automount.fdi
da un po di tempo quando collego a sistema già avviato una chiavetta usb fat32 non fa l'automount
riavviando con la chiavetta inserita invece tutto ok ma espellendola e reinserendola non salta fuori nulla
con il mount manuale tutto ok invece
le prove che ho fatto sono le seguenti:
lanciando il comando
gnome-mount -vbd /dev/sdb1
mi appare
gnome-mount 0.5
libhal-storage.c 1401 : INFO: called LIBHAL_FREE_DBUS_ERROR but dbusError was not set.
** (gnome-mount:6868): WARNING **: Il device "/dev/sdb1" fornito non è né un volume, né un'unità.
altra cosa strana è che non ho /etc/init.d/hal
e hal non lo trovo da nessuna parte
ho editato etc/hal/fdi/policy/preferences.fdi
inserendo <merge key=”volume.ignore” type=”bool”>false</merge>
ma niente da fare
ho dato infine il comando
dmesg | tail -f /var/log/messages
per vedere in tempo reale cosa succede quando collego la penna
l'output è il seguente
Nov 23 20:08:11 quincy kernel: [ 486.796000] usb 5-5: new high speed USB device using ehci_hcd and address 5
Nov 23 20:08:11 quincy kernel: [ 486.932000] usb 5-5: configuration #1 chosen from 1 choice
Nov 23 20:08:12 quincy kernel: [ 486.932000] scsi5 : SCSI emulation for USB Mass Storage devices
Nov 23 20:08:16 quincy kernel: [ 491.932000] scsi 5:0:0:0: Direct-Access Generic STORAGE DEVICE 1.04 PQ: 0 ANSI: 0
Nov 23 20:08:17 quincy kernel: [ 492.188000] SCSI device sdb: 512000 512-byte hdwr sectors (262 MB)
Nov 23 20:08:17 quincy kernel: [ 492.312000] usb 5-5: reset high speed USB device using ehci_hcd and address 5
Nov 23 20:08:17 quincy kernel: [ 492.828000] usb 5-5: reset high speed USB device using ehci_hcd and address 5
Nov 23 20:08:18 quincy kernel: [ 493.344000] usb 5-5: reset high speed USB device using ehci_hcd and address 5
Nov 23 20:08:18 quincy kernel: [ 493.868000] usb 5-5: reset high speed USB device using ehci_hcd and address 5
Nov 23 20:08:19 quincy kernel: [ 494.384000] usb 5-5: reset high speed USB device using ehci_hcd and address 5
Nov 23 20:08:19 quincy kernel: [ 494.900000] usb 5-5: reset high speed USB device using ehci_hcd and address 5
Nov 23 20:08:20 quincy kernel: [ 495.036000] sdb: Write Protect is off
Nov 23 20:08:20 quincy kernel: [ 495.296000] SCSI device sdb: 512000 512-byte hdwr sectors (262 MB)
Nov 23 20:08:20 quincy kernel: [ 495.420000] usb 5-5: reset high speed USB device using ehci_hcd and address 5
Nov 23 20:08:20 quincy kernel: [ 495.936000] usb 5-5: reset high speed USB device using ehci_hcd and address 5
Nov 23 20:08:21 quincy kernel: [ 496.448000] usb 5-5: reset high speed USB device using ehci_hcd and address 5
Nov 23 20:08:21 quincy kernel: [ 496.972000] usb 5-5: reset high speed USB device using ehci_hcd and address 5
Nov 23 20:08:22 quincy kernel: [ 497.488000] usb 5-5: reset high speed USB device using ehci_hcd and address 5
Nov 23 20:08:23 quincy kernel: [ 498.004000] usb 5-5: reset high speed USB device using ehci_hcd and address 5
Nov 23 20:08:23 quincy kernel: [ 498.140000] sdb: Write Protect is off
Nov 23 20:08:23 quincy kernel: [ 498.144000] sdb: sdb1
Nov 23 20:08:23 quincy kernel: [ 498.400000] sd 5:0:0:0: Attached scsi removable disk sdb
Nov 23 20:08:23 quincy kernel: [ 498.400000] sd 5:0:0:0: Attached scsi generic sg1 type 0
e la cosa finisce lì
prima avevo gparted installato
lui mi riconosceva la partizione ma mi diceva filesystem non conosciuto, controllare di avere il plugin installato
o una cosa simile cmq
qualcuno ha alternative da provare?
grazie
ciao
ho letto un po di topic sia qui, sia su altri forum sia su google ma niente di fatto
premettendo che non è colpa di gparted come successo ad alcuni xchè nel mio caso NON E' PRESENTE il file usr/share/hal/fdi/policy/gparted-disable-automount.fdi
da un po di tempo quando collego a sistema già avviato una chiavetta usb fat32 non fa l'automount
riavviando con la chiavetta inserita invece tutto ok ma espellendola e reinserendola non salta fuori nulla
con il mount manuale tutto ok invece
le prove che ho fatto sono le seguenti:
lanciando il comando
gnome-mount -vbd /dev/sdb1
mi appare
gnome-mount 0.5
libhal-storage.c 1401 : INFO: called LIBHAL_FREE_DBUS_ERROR but dbusError was not set.
** (gnome-mount:6868): WARNING **: Il device "/dev/sdb1" fornito non è né un volume, né un'unità.
altra cosa strana è che non ho /etc/init.d/hal
e hal non lo trovo da nessuna parte
ho editato etc/hal/fdi/policy/preferences.fdi
inserendo <merge key=”volume.ignore” type=”bool”>false</merge>
ma niente da fare
ho dato infine il comando
dmesg | tail -f /var/log/messages
per vedere in tempo reale cosa succede quando collego la penna
l'output è il seguente
Nov 23 20:08:11 quincy kernel: [ 486.796000] usb 5-5: new high speed USB device using ehci_hcd and address 5
Nov 23 20:08:11 quincy kernel: [ 486.932000] usb 5-5: configuration #1 chosen from 1 choice
Nov 23 20:08:12 quincy kernel: [ 486.932000] scsi5 : SCSI emulation for USB Mass Storage devices
Nov 23 20:08:16 quincy kernel: [ 491.932000] scsi 5:0:0:0: Direct-Access Generic STORAGE DEVICE 1.04 PQ: 0 ANSI: 0
Nov 23 20:08:17 quincy kernel: [ 492.188000] SCSI device sdb: 512000 512-byte hdwr sectors (262 MB)
Nov 23 20:08:17 quincy kernel: [ 492.312000] usb 5-5: reset high speed USB device using ehci_hcd and address 5
Nov 23 20:08:17 quincy kernel: [ 492.828000] usb 5-5: reset high speed USB device using ehci_hcd and address 5
Nov 23 20:08:18 quincy kernel: [ 493.344000] usb 5-5: reset high speed USB device using ehci_hcd and address 5
Nov 23 20:08:18 quincy kernel: [ 493.868000] usb 5-5: reset high speed USB device using ehci_hcd and address 5
Nov 23 20:08:19 quincy kernel: [ 494.384000] usb 5-5: reset high speed USB device using ehci_hcd and address 5
Nov 23 20:08:19 quincy kernel: [ 494.900000] usb 5-5: reset high speed USB device using ehci_hcd and address 5
Nov 23 20:08:20 quincy kernel: [ 495.036000] sdb: Write Protect is off
Nov 23 20:08:20 quincy kernel: [ 495.296000] SCSI device sdb: 512000 512-byte hdwr sectors (262 MB)
Nov 23 20:08:20 quincy kernel: [ 495.420000] usb 5-5: reset high speed USB device using ehci_hcd and address 5
Nov 23 20:08:20 quincy kernel: [ 495.936000] usb 5-5: reset high speed USB device using ehci_hcd and address 5
Nov 23 20:08:21 quincy kernel: [ 496.448000] usb 5-5: reset high speed USB device using ehci_hcd and address 5
Nov 23 20:08:21 quincy kernel: [ 496.972000] usb 5-5: reset high speed USB device using ehci_hcd and address 5
Nov 23 20:08:22 quincy kernel: [ 497.488000] usb 5-5: reset high speed USB device using ehci_hcd and address 5
Nov 23 20:08:23 quincy kernel: [ 498.004000] usb 5-5: reset high speed USB device using ehci_hcd and address 5
Nov 23 20:08:23 quincy kernel: [ 498.140000] sdb: Write Protect is off
Nov 23 20:08:23 quincy kernel: [ 498.144000] sdb: sdb1
Nov 23 20:08:23 quincy kernel: [ 498.400000] sd 5:0:0:0: Attached scsi removable disk sdb
Nov 23 20:08:23 quincy kernel: [ 498.400000] sd 5:0:0:0: Attached scsi generic sg1 type 0
e la cosa finisce lì
prima avevo gparted installato
lui mi riconosceva la partizione ma mi diceva filesystem non conosciuto, controllare di avere il plugin installato
o una cosa simile cmq
qualcuno ha alternative da provare?
grazie
ciao