iron84
14-11-2007, 12:14
Ho provato a dare il comando smartctl -a /dev/hda e ho ottenuto questo risultato.
smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Maxtor DiamondMax Plus 9 family
Device Model: Maxtor 6Y120L0
Serial Number: Y3HV333E
Firmware Version: YAR41BW0
User Capacity: 122,942,324,736 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0
Local Time is: Wed Nov 14 13:03:03 2007 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 242) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 54) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
3 Spin_Up_Time 0x0027 202 196 063 Pre-fail Always - 13129
4 Start_Stop_Count 0x0032 253 253 000 Old_age Always - 1412
5 Reallocated_Sector_Ct 0x0033 253 253 063 Pre-fail Always - 5
6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0
7 Seek_Error_Rate 0x000a 253 252 000 Old_age Always - 0
8 Seek_Time_Performance 0x0027 250 241 187 Pre-fail Always - 45911
9 Power_On_Minutes 0x0032 179 179 000 Old_age Always - 618h+57m
10 Spin_Retry_Count 0x002b 253 252 157 Pre-fail Always - 0
11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 250 250 000 Old_age Always - 1517
192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age Always - 0
193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always - 0
194 Temperature_Celsius 0x0032 253 253 000 Old_age Always - 40
195 Hardware_ECC_Recovered 0x000a 253 252 000 Old_age Always - 11059
196 Reallocated_Event_Count 0x0008 248 248 000 Old_age Offline - 5
197 Current_Pending_Sector 0x0008 253 253 000 Old_age Offline - 0
198 Offline_Uncorrectable 0x0008 253 141 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0008 198 197 000 Old_age Offline - 2
200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 253 215 000 Old_age Always - 1
202 TA_Increase_Count 0x000a 253 248 000 Old_age Always - 0
203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail Always - 2
204 Shock_Count_Write_Opern 0x000a 253 252 000 Old_age Always - 0
205 Shock_Rate_Write_Opern 0x000a 253 252 000 Old_age Always - 0
207 Spin_High_Current 0x002a 253 252 000 Old_age Always - 0
208 Spin_Buzz 0x002a 253 252 000 Old_age Always - 0
209 Offline_Seek_Performnce 0x0024 197 194 000 Old_age Offline - 0
99 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
100 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
101 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
SMART Error Log Version: 1
Warning: ATA error count 578 inconsistent with error log pointer 5
ATA Error Count: 578 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 578 occurred at disk power-on lifetime: 20088 hours (837 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 3f c7 07 e0 Error: ICRC, ABRT at LBA = 0x0007c73f = 509759
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 80 3f c7 07 e0 08 00:09:13.216 READ DMA
c8 00 c8 77 c6 07 e0 08 00:09:13.216 READ DMA
c8 00 00 2f 09 e6 e0 08 00:09:13.200 READ DMA
c8 00 00 e7 b4 07 e0 08 00:09:13.184 READ DMA
c8 00 18 af 8b e8 e0 08 00:09:13.168 READ DMA
Error 577 occurred at disk power-on lifetime: 20088 hours (837 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 27 5f e6 e0 Error: ICRC, ABRT at LBA = 0x00e65f27 = 15097639
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 c0 27 5f e6 e0 08 00:09:08.560 READ DMA
c8 00 00 27 5e e6 e0 08 00:09:08.560 READ DMA
c8 00 08 0f e6 90 e0 08 00:09:08.544 READ DMA
c8 00 08 e7 7a 24 e0 08 00:09:08.528 READ DMA
c8 00 08 c7 23 0c e0 08 00:09:08.512 READ DMA
Error 576 occurred at disk power-on lifetime: 20088 hours (837 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 d7 c7 07 e0 Error: ICRC, ABRT at LBA = 0x0007c7d7 = 509911
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 00 d7 c7 07 e0 08 00:06:30.240 READ DMA
c8 00 c0 47 31 e6 e0 08 00:06:30.240 READ DMA
c8 00 00 47 30 e6 e0 08 00:06:30.240 READ DMA
c8 00 c0 5f 4d c3 e0 08 00:06:30.224 READ DMA
c8 00 40 df 4b c3 e0 08 00:06:30.224 READ DMA
Error 575 occurred at disk power-on lifetime: 3621 hours (150 days + 21 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 06 3f bb 52 e2 Error: UNC 6 sectors at LBA = 0x0252bb3f = 38976319
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 d8 08 3f bb 52 e2 00 01:28:19.904 READ DMA
c8 d8 08 3f bb 52 e2 00 01:28:18.832 READ DMA
c8 d8 08 37 bb 52 e2 00 01:28:18.816 READ DMA
c8 d8 08 37 d3 51 e2 00 01:28:18.816 READ DMA
c8 d8 08 3f d3 51 e2 00 01:28:18.816 READ DMA
Error 574 occurred at disk power-on lifetime: 3621 hours (150 days + 21 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 06 3f bb 52 e2 Error: UNC 6 sectors at LBA = 0x0252bb3f = 38976319
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 d8 08 3f bb 52 e2 00 01:28:18.832 READ DMA
c8 d8 08 37 bb 52 e2 00 01:28:18.816 READ DMA
c8 d8 08 37 d3 51 e2 00 01:28:18.816 READ DMA
c8 d8 08 3f d3 51 e2 00 01:28:18.816 READ DMA
c8 d8 08 2f d3 51 e2 00 01:28:18.816 READ DMA
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 24132 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Cosa sono i "ERROR" alla fine del log?
---------------------------
Invece questo sul portatile con debian etch.
smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: FUJITSU MHV2080AT PL
Serial Number: NSA2T6128EW3
Firmware Version: 000000A0
User Capacity: 80,026,361,856 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a
Local Time is: Wed Nov 14 17:10:03 2007 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 552) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 70) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 046 Pre-fail Always - 31258
2 Throughput_Performance 0x0005 100 100 030 Pre-fail Offline - 28049408
3 Spin_Up_Time 0x0003 100 100 025 Pre-fail Always - 1
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 823
5 Reallocated_Sector_Ct 0x0033 100 100 024 Pre-fail Always - 8589934592000
7 Seek_Error_Rate 0x000f 100 100 047 Pre-fail Always - 2925
8 Seek_Time_Performance 0x0005 100 100 019 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 18475656
10 Spin_Retry_Count 0x0013 100 100 020 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 780
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 29
193 Load_Cycle_Count 0x0032 097 097 000 Old_age Always - 71173
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 27 (Lifetime Min/Max 18/48)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 248
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 413138944
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000f 100 100 060 Pre-fail Always - 24331
203 Run_Out_Cancel 0x0002 100 100 000 Old_age Always - 1533254828650
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
son normali quei valori altissimi?
smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Maxtor DiamondMax Plus 9 family
Device Model: Maxtor 6Y120L0
Serial Number: Y3HV333E
Firmware Version: YAR41BW0
User Capacity: 122,942,324,736 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0
Local Time is: Wed Nov 14 13:03:03 2007 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 242) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 54) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
3 Spin_Up_Time 0x0027 202 196 063 Pre-fail Always - 13129
4 Start_Stop_Count 0x0032 253 253 000 Old_age Always - 1412
5 Reallocated_Sector_Ct 0x0033 253 253 063 Pre-fail Always - 5
6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0
7 Seek_Error_Rate 0x000a 253 252 000 Old_age Always - 0
8 Seek_Time_Performance 0x0027 250 241 187 Pre-fail Always - 45911
9 Power_On_Minutes 0x0032 179 179 000 Old_age Always - 618h+57m
10 Spin_Retry_Count 0x002b 253 252 157 Pre-fail Always - 0
11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 250 250 000 Old_age Always - 1517
192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age Always - 0
193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always - 0
194 Temperature_Celsius 0x0032 253 253 000 Old_age Always - 40
195 Hardware_ECC_Recovered 0x000a 253 252 000 Old_age Always - 11059
196 Reallocated_Event_Count 0x0008 248 248 000 Old_age Offline - 5
197 Current_Pending_Sector 0x0008 253 253 000 Old_age Offline - 0
198 Offline_Uncorrectable 0x0008 253 141 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0008 198 197 000 Old_age Offline - 2
200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 253 215 000 Old_age Always - 1
202 TA_Increase_Count 0x000a 253 248 000 Old_age Always - 0
203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail Always - 2
204 Shock_Count_Write_Opern 0x000a 253 252 000 Old_age Always - 0
205 Shock_Rate_Write_Opern 0x000a 253 252 000 Old_age Always - 0
207 Spin_High_Current 0x002a 253 252 000 Old_age Always - 0
208 Spin_Buzz 0x002a 253 252 000 Old_age Always - 0
209 Offline_Seek_Performnce 0x0024 197 194 000 Old_age Offline - 0
99 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
100 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
101 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
SMART Error Log Version: 1
Warning: ATA error count 578 inconsistent with error log pointer 5
ATA Error Count: 578 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 578 occurred at disk power-on lifetime: 20088 hours (837 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 3f c7 07 e0 Error: ICRC, ABRT at LBA = 0x0007c73f = 509759
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 80 3f c7 07 e0 08 00:09:13.216 READ DMA
c8 00 c8 77 c6 07 e0 08 00:09:13.216 READ DMA
c8 00 00 2f 09 e6 e0 08 00:09:13.200 READ DMA
c8 00 00 e7 b4 07 e0 08 00:09:13.184 READ DMA
c8 00 18 af 8b e8 e0 08 00:09:13.168 READ DMA
Error 577 occurred at disk power-on lifetime: 20088 hours (837 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 27 5f e6 e0 Error: ICRC, ABRT at LBA = 0x00e65f27 = 15097639
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 c0 27 5f e6 e0 08 00:09:08.560 READ DMA
c8 00 00 27 5e e6 e0 08 00:09:08.560 READ DMA
c8 00 08 0f e6 90 e0 08 00:09:08.544 READ DMA
c8 00 08 e7 7a 24 e0 08 00:09:08.528 READ DMA
c8 00 08 c7 23 0c e0 08 00:09:08.512 READ DMA
Error 576 occurred at disk power-on lifetime: 20088 hours (837 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 d7 c7 07 e0 Error: ICRC, ABRT at LBA = 0x0007c7d7 = 509911
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 00 d7 c7 07 e0 08 00:06:30.240 READ DMA
c8 00 c0 47 31 e6 e0 08 00:06:30.240 READ DMA
c8 00 00 47 30 e6 e0 08 00:06:30.240 READ DMA
c8 00 c0 5f 4d c3 e0 08 00:06:30.224 READ DMA
c8 00 40 df 4b c3 e0 08 00:06:30.224 READ DMA
Error 575 occurred at disk power-on lifetime: 3621 hours (150 days + 21 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 06 3f bb 52 e2 Error: UNC 6 sectors at LBA = 0x0252bb3f = 38976319
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 d8 08 3f bb 52 e2 00 01:28:19.904 READ DMA
c8 d8 08 3f bb 52 e2 00 01:28:18.832 READ DMA
c8 d8 08 37 bb 52 e2 00 01:28:18.816 READ DMA
c8 d8 08 37 d3 51 e2 00 01:28:18.816 READ DMA
c8 d8 08 3f d3 51 e2 00 01:28:18.816 READ DMA
Error 574 occurred at disk power-on lifetime: 3621 hours (150 days + 21 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 06 3f bb 52 e2 Error: UNC 6 sectors at LBA = 0x0252bb3f = 38976319
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 d8 08 3f bb 52 e2 00 01:28:18.832 READ DMA
c8 d8 08 37 bb 52 e2 00 01:28:18.816 READ DMA
c8 d8 08 37 d3 51 e2 00 01:28:18.816 READ DMA
c8 d8 08 3f d3 51 e2 00 01:28:18.816 READ DMA
c8 d8 08 2f d3 51 e2 00 01:28:18.816 READ DMA
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 24132 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Cosa sono i "ERROR" alla fine del log?
---------------------------
Invece questo sul portatile con debian etch.
smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: FUJITSU MHV2080AT PL
Serial Number: NSA2T6128EW3
Firmware Version: 000000A0
User Capacity: 80,026,361,856 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a
Local Time is: Wed Nov 14 17:10:03 2007 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 552) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 70) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 046 Pre-fail Always - 31258
2 Throughput_Performance 0x0005 100 100 030 Pre-fail Offline - 28049408
3 Spin_Up_Time 0x0003 100 100 025 Pre-fail Always - 1
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 823
5 Reallocated_Sector_Ct 0x0033 100 100 024 Pre-fail Always - 8589934592000
7 Seek_Error_Rate 0x000f 100 100 047 Pre-fail Always - 2925
8 Seek_Time_Performance 0x0005 100 100 019 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 18475656
10 Spin_Retry_Count 0x0013 100 100 020 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 780
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 29
193 Load_Cycle_Count 0x0032 097 097 000 Old_age Always - 71173
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 27 (Lifetime Min/Max 18/48)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 248
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 413138944
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000f 100 100 060 Pre-fail Always - 24331
203 Run_Out_Cancel 0x0002 100 100 000 Old_age Always - 1533254828650
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
son normali quei valori altissimi?