LAN win-linux

[Furla]

ciao a tutti, ho 2 PC: uno con win server 2003 ed uno con ubuntu 7.04 appena installato. entrambi i pc hanno 2 schede di rete: una wireless, che li connette ad un ap-router, ed una ethernet con cui li collego tra loro tramite cavo crossed, per spostare i file grossi. fin'ora la configurazione era la stessa, ma sul pc linux prima c'era win2k sp4 (e tutto ovviamente funzionava a dovere).

il dispositivo wireless non è stato riconosciuto da ubuntu, come prevedibile (ho già trovato una pagina che potrebbe fare al caso mio anche se non ci capisco molto, http://wiki.ubuntu-it.org/Hardware/DispositiviSenzaFili/RalinkRT73, risolto il primo problema mi aiutate a farla funzionare, vero? :D), mentre la scheda ethernet sono già riuscito ad impostarla.

il mio problema è che non riesco a condividere files tramite la rete ethernet: i pc si pingano a vicenda, quindi la rete c'è...
sulle guide trovate in rete leggo che in teoria non occorre impostare nulla per vedere da linux le risorse condivise da windows, eppure places->rete->windows network è vuota.
se invece tento di condividere qualcosa sul pc linux andando su system->amministrazione->cartelle condivise, dopo aver inserito la password mi appare una finestra di dialogo che dice che devo installare i servizi di condivisione e mi permette di (de)selezionare smb e nfs, ma quando clicko su "install services" resta imbambolato per qualche secondo e poi ricompare la stessa finestra.

qualcuno mi sa aiutare?

[Gimli[2BV!2B]]

Prova ad accedere direttamente col tuo file-browser mettendo come indirizzo:

smb://IP.DEL.COMPUTER.WIN2003

Per il wizard di condivisione che non vuol andare, prova ad installare prima samba con il tuo programma di gestione di pacchetti preferito (Synaptic o Adept o chissà che...), poi prova ad usarlo di nuovo.

[tutmosi3]

Ci sono firewall in Windows che impediscono l'accesso?

Ciao

[Furla]

nessun firewall, buona la prima di gimli!

ok adesso sono in grado di scaricare i driver e seguire le istruzioni della pagina che ho linkato nel primo post, se ho problemi vi faccio sapere!

ah un'altra cosa, da quel che ho capito samba è indispensabile se voglio accedere alle risorse del PC linux da quello windows (l'inverso di quello che sono riuscito a fare). per installarlo con il mio "programma gestione pacchetti preferito" (che non ho la minima idea di cosa sia) mi serve internet, giusto?

[Gimli[2BV!2B]]

E' sì, serve internet... Non credo ci sia sul cd di kubuntu il server Samba, per problemi di spazio.

Per "programma gestione pacchetti preferito" intendo Synaptic o Adept, che sono i gestori grafici migliori. Dovresti trovarli nel menù (se ancora in inglese dovrebbe essere sotto "package manager" o simile), non ricordo in quale sezione perchè non ho usato granchè Ubuntu.

Scaricarli a mano mi sembra poco proponibile, perchè credo abbiano abbastanza dipendenze insoddisfatte da seguire.

[Furla]

;18779604']Scaricarli a mano mi sembra poco proponibile, perchè credo abbiano abbastanza dipendenze insoddisfatte da seguire.
ma intendi samba o i drivers per la rete wireless?

io ho provato ad installare i drivers della mia scheda usb, atlantis A02-UP1-W54, seguendo questa guida (http://wiki.ubuntu-it.org/Hardware/DispositiviSenzaFili/RalinkRT73), ma con esito negativo.

ecco cosa ho fatto:
1. ho scaricato il file .tar.gz linkato nella guida sul pc win;
2. lo ho copiato nella home tramite la rete wired;
3. ho provato a compiere le istruzioni al passo "Esclusione dei moduli" della guida, ma non trova nessun modulo da eliminare...
4. ho seguito senza problemi o errori i passi successivi della guida;
5. non ho trovato nessuna nuova interfaccia di rete al termine delle operazioni quando la guida dice "Verificare il corretto funzionamento della chiavetta e accertarsi della comparsa di una nuova interfaccia di rete denominata wlan0 oppure wlan1."

per caso in qualche passo della guida era necessaria la connessione ad internet? il fatto che non ci fossero moduli da escludere cosa può voler dire?

[Gimli[2BV!2B]]

No scusa, io parlavo ancora di Samba. M'ero dimenticato dei drivers wifi.

Mi sembra di capire che non hai incontrato problemi particolari seguendo la guida. Ma precisiamo un paio di punti:

non hai trovato i moduli fastidiosi caricati, ma li hai blacklistati ugualmente (gksu gedit /etc/modprobe.d/blacklist ecc, ecc...)?
hai portato a termine la guida inserendo rt73 in /etc/modules?


Una volta sistemato tutto riavvia (per sicurezza...) e facciamo un paio di prove:

controlla che il modulo sia stato caricato correttamente: esegui il comando lsmod | grep rt73 se ti appare rt73 e basta tutto ok, altrimenti vuol dire che il modulo non va d'accordo col kernel o chissà che e non viene caricato.
prova ad inserire la scheda (non lasciarla inserita durante l'avvio, collegala dopo), e se non funziona ancora esegui il comando dmesg | taildovresti vedere gli ultimi eventi (ed eventuali errori) relativi alla scheda


Se ancora non funziona posta o allega il risultato del comando dmesg

[Furla]

non ho neanche provato a blacklistarli, se non ci sono a che servirebbe? o sbaglio?
la verifica dell'esistenza della nuova interfaccia l'ho fatta senza riavviare, quindi credo non fosse necessario modificare /etc/modules... comunque anche modificandolo e riavviando non è cambiato niente.

output di lsmod | grep rt73:

rt73 214016 0
usbcore 134280 4 rt73,ehci_hcd,ohci_hcp


output di dmesg:

[ 0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001fef0000 end: 000000001fff0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000001fff0000 size: 0000000000003000 end: 000000001fff3000 type: 4
[ 0.000000] copy_e820_map() start: 000000001fff3000 size: 000000000000d000 end: 0000000020000000 type: 3
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 131056
[ 0.000000] HighMem 131056 -> 131056
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 131056
[ 0.000000] On node 0 totalpages: 131056
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 991 pages used for memmap
[ 0.000000] Normal zone: 125969 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP (v000 Nvidia ) @ 0x000f7960
[ 0.000000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
[ 0.000000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
[ 0.000000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff7d00
[ 0.000000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:10 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[ 0.000000] Detected 1603.706 MHz processor.
[ 20.247735] Built 1 zonelists. Total pages: 130033
[ 20.247739] Kernel command line: root=UUID=0f95d259-8c47-421d-b0be-04446e23bb71 ro quiet splash
[ 20.247929] mapped APIC to ffffd000 (fee00000)
[ 20.247932] mapped IOAPIC to ffffc000 (fec00000)
[ 20.247935] Enabling fast FPU save and restore... done.
[ 20.247938] Enabling unmasked SIMD FPU exception support... done.
[ 20.247947] Initializing CPU#0
[ 20.247999] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 20.249259] Console: colour VGA+ 80x25
[ 20.249510] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 20.249757] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 20.261537] Memory: 508480k/524224k available (1992k kernel code, 15180k reserved, 893k data, 328k init, 0k highmem)
[ 20.261549] virtual kernel memory layout:
[ 20.261551] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 20.261552] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 20.261554] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 20.261555] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
[ 20.261557] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 20.261558] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
[ 20.261560] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
[ 20.261564] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 20.339930] Calibrating delay using timer specific routine.. 3209.95 BogoMIPS (lpj=6419904)
[ 20.339973] Security Framework v1.0.0 initialized
[ 20.339979] SELinux: Disabled at boot.
[ 20.339996] Mount-cache hash table entries: 512
[ 20.340133] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[ 20.340143] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 20.340146] CPU: L2 Cache: 512K (64 bytes/line)
[ 20.340149] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
[ 20.340160] Compat vDSO mapped to ffffe000.
[ 20.340165] Remapping vsyscall page to ffffe000
[ 20.340174] Checking 'hlt' instruction... OK.
[ 20.356023] SMP alternatives: switching to UP code
[ 20.356220] Freeing SMP alternatives: 11k freed
[ 20.356429] Early unpacking initramfs... done
[ 20.724978] ACPI: Core revision 20060707
[ 20.731956] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 20.735416] CPU0: AMD Athlon(tm) stepping 00
[ 20.735438] Total of 1 processors activated (3209.95 BogoMIPS).
[ 20.735640] ENABLING IO-APIC IRQs
[ 20.735826] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 20.879542] Brought up 1 CPUs
[ 20.879788] Booting paravirtualized kernel on bare hardware
[ 20.879857] Time: 8:59:24 Date: 08/20/107
[ 20.879888] NET: Registered protocol family 16
[ 20.879980] EISA bus registered
[ 20.879985] ACPI: bus type pci registered
[ 20.914473] PCI: PCI BIOS revision 2.10 entry at 0xfb440, last bus=2
[ 20.914476] PCI: Using configuration type 1
[ 20.914478] Setting up standard PCI resources
[ 20.929168] ACPI: Interpreter enabled
[ 20.929172] ACPI: Using IOAPIC for interrupt routing
[ 20.929874] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 20.929879] PCI: Probing PCI hardware (bus 00)
[ 20.930180] PCI: nForce2 C1 Halt Disconnect fixup
[ 20.930939] Boot video device is 0000:02:00.0
[ 20.931027] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 21.011191] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 21.011861] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[ 21.013127] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 21.013531] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 21.013925] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 21.014321] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 21.014714] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 21.015111] ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 21.015516] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 21.015909] ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 21.016301] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 21.016704] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 21.017098] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 21.017492] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 21.017887] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 21.018293] ACPI: PCI Interrupt Link [LFIR] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 21.018691] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 21.019087] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 21.019456] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
[ 21.019804] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
[ 21.020151] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
[ 21.020496] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
[ 21.020841] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 21.021285] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
[ 21.021731] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
[ 21.022187] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
[ 21.022629] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
[ 21.023089] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
[ 21.023552] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
[ 21.023898] ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
[ 21.024335] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
[ 21.024777] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[ 21.025228] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
[ 21.025665] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[ 21.029886] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 21.029902] pnp: PnP ACPI init
[ 21.037351] pnp: PnP ACPI: found 16 devices
[ 21.037355] PnPBIOS: Disabled by ACPI PNP
[ 21.037404] PCI: Using ACPI for IRQ routing
[ 21.037410] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 21.077642] NET: Registered protocol family 8
[ 21.077644] NET: Registered protocol family 20
[ 21.078356] pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
[ 21.078360] pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
[ 21.078366] pnp: 00:00: ioport range 0x4400-0x447f has been reserved
[ 21.078370] pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
[ 21.078373] pnp: 00:00: ioport range 0x4200-0x427f has been reserved
[ 21.078376] pnp: 00:00: ioport range 0x4280-0x42ff has been reserved
[ 21.078382] pnp: 00:01: ioport range 0x5000-0x503f has been reserved
[ 21.078385] pnp: 00:01: ioport range 0x5100-0x513f has been reserved
[ 21.078689] PCI: Bridge: 0000:00:08.0
[ 21.078693] IO window: a000-bfff
[ 21.078699] MEM window: ea000000-ebffffff
[ 21.078703] PREFETCH window: 30000000-300fffff
[ 21.078709] PCI: Bridge: 0000:00:1e.0
[ 21.078711] IO window: c000-cfff
[ 21.078716] MEM window: e8000000-e9ffffff
[ 21.078720] PREFETCH window: d8000000-e7ffffff
[ 21.078730] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 21.078760] NET: Registered protocol family 2
[ 21.115386] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 21.115471] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 21.115628] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 21.115722] TCP: Hash tables configured (established 16384 bind 8192)
[ 21.115725] TCP reno registered
[ 21.127422] checking if image is initramfs... it is
[ 21.834032] Freeing initrd memory: 6992k freed
[ 21.834498] audit: initializing netlink socket (disabled)
[ 21.834511] audit(1190278764.668:1): initialized
[ 21.834622] VFS: Disk quotas dquot_6.5.1
[ 21.834640] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 21.834683] io scheduler noop registered
[ 21.834686] io scheduler anticipatory registered
[ 21.834689] io scheduler deadline registered
[ 21.834698] io scheduler cfq registered (default)
[ 21.874940] isapnp: Scanning for PnP cards...
[ 22.229117] isapnp: No Plug & Play device found
[ 22.257299] Real Time Clock Driver v1.12ac
[ 22.257355] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 22.257487] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 22.258125] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 22.258414] mice: PS/2 mouse device common for all mice
[ 22.258997] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 22.259224] input: Macintosh mouse button emulation as /class/input/input0
[ 22.259261] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 22.259265] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 22.259483] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 22.262364] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 22.262370] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 22.262512] EISA: Probing bus 0 at eisa.0
[ 22.262536] Cannot allocate resource for EISA slot 4
[ 22.262539] Cannot allocate resource for EISA slot 5
[ 22.262556] EISA: Detected 0 cards.
[ 22.292622] TCP cubic registered
[ 22.292629] NET: Registered protocol family 1
[ 22.292649] Using IPI No-Shortcut mode
[ 22.292708] ACPI: (supports S0 S1 S4 S5)
[ 22.292762] Magic number: 7:809:978
[ 22.292777] hash matches device ttyc5
[ 22.293205] Freeing unused kernel memory: 328k freed
[ 22.294363] Time: tsc clocksource has been installed.
[ 22.307260] input: AT Translated Set 2 keyboard as /class/input/input1
[ 23.548028] Capability LSM initialized
[ 23.585441] ACPI: Fan [FAN] (on)
[ 23.591914] ACPI: Thermal Zone [THRM] (29 C)
[ 24.123359] usbcore: registered new interface driver usbfs
[ 24.123387] usbcore: registered new interface driver hub
[ 24.123413] usbcore: registered new device driver usb
[ 24.124175] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 24.124667] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[ 24.124676] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 16
[ 24.124689] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 24.124694] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 24.124833] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 24.124853] ohci_hcd 0000:00:02.0: irq 16, io mem 0xec080000
[ 24.164957] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59.
[ 24.193758] SCSI subsystem initialized
[ 24.199503] libata version 2.20 loaded.
[ 24.214723] ieee1394: Initialized config rom entry `ip1394'
[ 24.235297] usb usb1: configuration #1 chosen from 1 choice
[ 24.235327] hub 1-0:1.0: USB hub found
[ 24.235339] hub 1-0:1.0: 3 ports detected
[ 24.341309] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
[ 24.341319] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 21 (level, high) -> IRQ 17
[ 24.341335] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 24.341339] ohci_hcd 0000:00:02.1: OHCI Host Controller
[ 24.341364] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 24.341385] ohci_hcd 0000:00:02.1: irq 17, io mem 0xec083000
[ 24.391388] Floppy drive(s): fd0 is 1.44M
[ 24.402750] usb usb2: configuration #1 chosen from 1 choice
[ 24.402782] hub 2-0:1.0: USB hub found
[ 24.402795] hub 2-0:1.0: 3 ports detected
[ 24.450112] FDC 0 is a post-1991 82077
[ 24.509283] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[ 24.509294] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 20 (level, high) -> IRQ 18
[ 24.509306] PCI: Setting latency timer of device 0000:00:02.2 to 64
[ 24.509310] ehci_hcd 0000:00:02.2: EHCI Host Controller
[ 24.509338] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
[ 24.509374] ehci_hcd 0000:00:02.2: debug port 1
[ 24.509380] PCI: cache line size of 64 is not supported by device 0000:00:02.2
[ 24.509391] ehci_hcd 0000:00:02.2: irq 18, io mem 0xec086000
[ 24.509400] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 24.509475] usb usb3: configuration #1 chosen from 1 choice
[ 24.509504] hub 3-0:1.0: USB hub found
[ 24.509513] hub 3-0:1.0: 6 ports detected
[ 24.617159] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[ 24.617166] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 22 (level, high) -> IRQ 16
[ 24.617173] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 25.140416] eth0: forcedeth.c: subsystem: 010de:0c11 bound to 0000:00:04.0
[ 25.145592] NFORCE2: IDE controller at PCI slot 0000:00:09.0
[ 25.145615] NFORCE2: chipset revision 162
[ 25.145618] NFORCE2: not 100% native mode: will probe irqs later
[ 25.145627] NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
[ 25.145637] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
[ 25.145649] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
[ 25.145658] Probing IDE interface ide0...
[ 25.659746] hdb: Maxtor 6Y080L0, ATA DISK drive
[ 25.719878] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 25.728257] Probing IDE interface ide1...
[ 26.467095] hdc: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive
[ 26.807984] ide1 at 0x170-0x177,0x376 on irq 15
[ 26.815049] ACPI: PCI Interrupt Link [APCM] enabled at IRQ 21
[ 26.815055] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [APCM] -> GSI 21 (level, high) -> IRQ 17
[ 26.815062] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 26.867706] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[ec084000-ec0847ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 26.884174] hdb: max request size: 128KiB
[ 26.884232] sata_sil 0000:01:0b.0: version 2.2
[ 26.884514] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 26.884523] ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 19
[ 26.884542] sata_sil 0000:01:0b.0: Applying R_ERR on DMA activate FIS errata fix
[ 26.884608] ata1: SATA max UDMA/100 cmd 0xe0934080 ctl 0xe093408a bmdma 0xe0934000 irq 19
[ 26.884641] ata2: SATA max UDMA/100 cmd 0xe09340c0 ctl 0xe09340ca bmdma 0xe0934008 irq 19
[ 26.884673] ata3: SATA max UDMA/100 cmd 0xe0934280 ctl 0xe093428a bmdma 0xe0934200 irq 19
[ 26.884704] ata4: SATA max UDMA/100 cmd 0xe09342c0 ctl 0xe09342ca bmdma 0xe0934208 irq 19
[ 26.884718] scsi0 : sata_sil
[ 26.894453] hdb: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33)
[ 26.895699] hdb: cache flushes supported
[ 26.895745] hdb: hdb1 hdb2 hdb3
[ 26.931985] hdc: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 26.931994] Uniform CD-ROM driver Revision: 3.20
[ 27.159884] Attempting manual resume
[ 27.159889] swsusp: Resume From Partition 3:66
[ 27.159891] PM: Checking swsusp image.
[ 27.160195] PM: Resume from disk failed.
[ 27.187786] kjournald starting. Commit interval 5 seconds
[ 27.187798] EXT3-fs: mounted filesystem with ordered data mode.
[ 27.194398] ata1: SATA link down (SStatus 0 SControl 310)
[ 27.194423] scsi1 : sata_sil
[ 27.510139] ata2: SATA link down (SStatus 0 SControl 310)
[ 27.510171] scsi2 : sata_sil
[ 27.825882] ata3: SATA link down (SStatus 0 SControl 310)
[ 27.825904] scsi3 : sata_sil
[ 27.987912] ohci1394: fw-host0: SelfID received outside of bus reset sequence
[ 28.245542] ata4: SATA link down (SStatus 0 SControl 310)
[ 28.246153] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 28.246409] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[ 28.246417] ACPI: PCI Interrupt 0000:01:0c.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 20
[ 28.246559] eth1: RTL8169s/8110s at 0xe08c2000, 00:01:29:26:1f:6b, IRQ 20
[ 28.261657] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0001292000003a4b]
[ 36.442986] r8169: eth1: link down
[ 36.907464] NET: Registered protocol family 10
[ 36.907556] lo: Disabled Privacy Extensions
[ 36.907903] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 38.404891] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
[ 38.404935] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5100
[ 38.459156] Linux agpgart interface v0.102 (c) Dave Jones
[ 38.490577] agpgart: Detected NVIDIA nForce2 chipset
[ 38.497145] agpgart: AGP aperture is 128M @ 0xd0000000
[ 38.769327] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 38.779936] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 39.273928] input: PC Speaker as /class/input/input2
[ 39.462363] parport: PnPBIOS parport detected.
[ 39.462422] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 39.490467] input: ImExPS/2 Generic Explorer Mouse as /class/input/input3
[ 39.811197] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20
[ 39.811203] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 20 (level, high) -> IRQ 18
[ 39.811230] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 40.135897] intel8x0_measure_ac97_clock: measured 56820 usecs
[ 40.135901] intel8x0: clocking to 48000
[ 40.263068] fuse init (API version 7.8)
[ 40.286509] lp0: using parport0 (interrupt-driven).
[ 40.368118] rtusb init ====>
[ 40.369416] usbcore: registered new interface driver rt73
[ 40.401070] Adding 1951888k swap on /dev/disk/by-uuid/6db01978-5f81-4dc3-8afb-5a4d7529fb4d. Priority:-1 extents:1 across:1951888k
[ 40.542629] EXT3 FS on hdb1, internal journal
[ 40.801621] kjournald starting. Commit interval 5 seconds
[ 40.801901] EXT3 FS on hdb3, internal journal
[ 40.801906] EXT3-fs: mounted filesystem with ordered data mode.
[ 42.175799] NET: Registered protocol family 17
[ 45.049397] input: Power Button (FF) as /class/input/input4
[ 45.053883] ACPI: Power Button (FF) [PWRF]
[ 45.097827] input: Power Button (CM) as /class/input/input5
[ 45.102304] ACPI: Power Button (CM) [PWRB]
[ 45.189983] No dock devices found.
[ 45.260560] ibm_acpi: ec object not found
[ 45.295979] Using specific hotkey driver
[ 45.342882] pcc_acpi: loading...
[ 46.986355] eth0: no IPv6 routers present
[ 51.000251] [drm] Initialized drm 1.1.0 20060810
[ 51.011678] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 19
[ 51.014539] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[ 51.658898] ppdev: user-space parallel port driver
[ 52.287762] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 52.287768] apm: overridden by ACPI.
[ 52.472690] Bluetooth: Core ver 2.11
[ 52.472749] NET: Registered protocol family 31
[ 52.472751] Bluetooth: HCI device and connection manager initialized
[ 52.472756] Bluetooth: HCI socket layer initialized
[ 52.510890] Bluetooth: L2CAP ver 2.8
[ 52.510894] Bluetooth: L2CAP socket layer initialized
[ 52.678133] Bluetooth: RFCOMM socket layer initialized
[ 52.678148] Bluetooth: RFCOMM TTY layer initialized
[ 52.678150] Bluetooth: RFCOMM ver 1.8
[ 52.993018] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[ 52.993212] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
[ 52.993270] agpgart: Putting AGP V3 device at 0000:02:00.0 into 4x mode
[ 53.306034] [drm] Setting GART location based on new memory map
[ 53.306046] [drm] Loading R300 Microcode
[ 53.306095] [drm] writeback test succeeded in 1 usecs
[ 257.728122] usb 3-4: new high speed USB device using ehci_hcd and address 2
[ 257.868381] usb 3-4: configuration #1 chosen from 1 choice

non mi sembrano errori, questi alla fine... comunque mi sono accorto che in system->preferenze->hardware information la scheda è chiamata unknown (0x0163) e non col suo nome... è normale?

[Gimli[2BV!2B]]

Blacklistarli serve ad evitare che li carichi automaticamente! Soprattutto l'rt73usb buggato citato nella guida. Se non l'hai ancora fatto, fallo!

Se ancora non funziona non ho molte altre idee... Se non è stato caricato qualche modulo che è andato in conflitto con quello giusto sembrerebbe che non venga proprio riconosciuta.

[Furla]

mi sa che non la riconosce proprio... e mi sono accorto di una cosa :(

la mia scheda non è una a02-up1-w54 ma una a02-up-w54, e sul sito della atlantis, guardando nei dettagli dei prodotti, la prima è esplicitamente compatibile con linux, mentre per la mia ciò non è scritto :cry: