Da poco ho scoperto che ho problemi nella masterizzazione con un plextor PX-708A e un samsung SW 224b
Prima col Plextor, per lavoro, nel creare una iso di un dvd o nella masterizzazione della struttura di un dvd non mi è stato possibile materizzare delle copie funzionanti e pensavo che fosse guasto il dvd sorgente e poi masterizzando un semplice film con il samsung, nero mi ha interrotto la bruciatura a metà traccia.
A questo punto penso che sia un problema software anche perchè ho da poco installato il service pack 2 e non vorrei mi avesse creato qualche problema.
Sia per godermi un film e sopratutto per poter masterizzare DVD per lavoro vorrei tanto poter risolvere in qualche modo ma non so dove mettere le mani.
Sapete appunto se il service pack 2 crea di questi problemi? Perchè altre modifiche sostanziali al sistema non ne ho apportate.....
Chi mi aiuta???
Angelus88
13-07-2007, 23:58
Vai in gestione periferiche e controlla che nelle impostazioni avanzate dei controller ide la modalità di trasferimento corrente sia in tutte "DMA"...
Dovresti indicare il log che ti ha dato il Nero quando si è fermato, per capire dove può essere il problema
;)
Vai in gestione periferiche e controlla che nelle impostazioni avanzate dei controller ide la modalità di trasferimento corrente sia in tutte "DMA"...
Si, sono selezionati Ultra DMA 2 - Ultra33 per il plextor e Multi-word DMA 2 per il samsung
Dovresti indicare il log che ti ha dato il Nero quando si è fermato, per capire dove può essere il problema
;)
Ora provo a masterizzare e recupero i log....
Ok questo è il log di un tentativo di masterizzazione di un divx sul samsung; lo posto tutto:
Lorenzo
1C82-0000-19E5-MAAX-4008-2136-****
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 14.06.00
ahead WinASPI: File 'D:\Programmi\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12.54.32
NT-SPTI used
Nero Version: 7.5.9.0
Internal Version: 7, 5, 9, 0
Recorder: <SAMSUNG CD-R/RW SW-224B> Version: R205 - HA 1 TA 1 - 7.5.9.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <UL3390P OLC764Q >Version: 1.0 - HA 1 TA 2 - 7.5.9.0
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 nvatabus Port 0 ID 0 DMA: Off
DiskPeripheral : Maxtor 6B300R0 nvatabus Port 0 ID 1 DMA: Off
CdRomPeripheral : PLEXTOR DVDR PX-708A nvatabus Port 0 ID 2 DMA: Off
CdRomPeripheral : SAMSUNG CD-R/RW SW-224B nvatabus Port 0 ID 3 DMA: Off
CdRomPeripheral : UL3390P OLC764Q 1.0 a0cs2214 Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
SAMSUNG CD-R/RW SW-224B H: CDRom1
PLEXTOR DVDR PX-708A I: CDRom0
UL3390P OLC764Q J: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 679MB (696112kB)
Memory in use : 33 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
14.7.2007
CD-ROM (ISO)
1.00.06 #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
1.00.06 #2 Text 0 File Isodoc.cpp, Line 6509
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
1.00.06 #3 Text 0 File Burncd.cpp, Line 3149
SAMSUNG CD-R/RW SW-224B
JustLink activated
1.00.06 #4 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)
1.00.06 #5 Text 0 File Burncd.cpp, Line 3451
Turn on Disc-At-Once, using CD-R/RW media
1.00.08 #6 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 368999 ( 82:01.74), real: 79:59.73
Last address to be written: 365049 ( 81:09.24)
1.00.08 #7 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: YES (enabled: CD)
1.00.08 #8 Text 0 File DlgWaitCD.cpp, Line 2903
Recorder: SAMSUNG CD-R/RW SW-224B;
CDRW code: 00 97 26 65; OSJ entry from: CMC Magnetics Corporation
ATIP Data: ?
1.00.08 #9 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Not enough free discspace.
(Medium in drive: CD-RW. Medium required by compilation: CD-R/RW.)
Data to be written: 0 bytes (0 bytes)
Space available on the disc: 0 bytes (0 bytes)
1.00.08 #10 Text 0 File ThreadedTransferInterface.cpp, Line 821
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 365050 (365050) = #365050/81:7.25
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 365050 blocks [H: SAMSUNG CD-R/RW SW-224B]
--------------------------------------------------------------
1.00.10 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1024
Prepare [H: SAMSUNG CD-R/RW SW-224B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 747929600, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 365050 | -150 | 0x00
0 | 1 | 1 | 0x41 | 365050 | 0 | 0x00
365050 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
1.00.10 #12 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
1.00.10 #13 Phase 24 File dlgbrnst.cpp, Line 1746
Caching of files started
1.00.10 #14 Text 0 File Burncd.cpp, Line 4278
Cache writing successful.
1.00.10 #15 Phase 25 File dlgbrnst.cpp, Line 1746
Caching of files completed
1.00.10 #16 Phase 36 File dlgbrnst.cpp, Line 1746
Burn process started at 4x (600 KB/s)
1.00.10 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2743
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1.00.10 #18 Text 0 File MMC.cpp, Line 17552
StartDAO : CD-Text - Off
1.00.10 #19 Text 0 File MMC.cpp, Line 22179
Set BUFE: JustLink -> ON
1.00.10 #20 Text 0 File MMC.cpp, Line 17780
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 51 09 19
1.21.33 #21 Text 0 File WriterStatus.cpp, Line 113
<H: SAMSUNG CD-R/RW SW-224B> start writing Lead-Out at LBA 365050 (591FAh), length 0 blocks
1.21.49 #22 SPTI -1135 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C
1.21.49 #23 CDR -1135 File ThreadedTransferInterface.cpp, Line 1920
Write error
H: SAMSUNG CD-R/RW SW-224B
1.21.49 #24 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1920
Could not perform end of Disc-at-once
1.21.49 #25 SPTI -1169 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1169)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x07
CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 07
1.21.49 #26 CDR -201 File WriterStatus.cpp, Line 162
Invalid write state
H: SAMSUNG CD-R/RW SW-224B
1.21.49 #27 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once
1.21.49 #28 SPTI -1169 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1169)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x07
CDB Data: 0x55 10 00 00 00 00 00 00 3C 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 07
Buffer x0492ddc0: Len x3c
0x00 00 00 00 00 00 00 00 05 32 01 C4 08 00 00 00
0x00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1.21.49 #29 Phase 38 File dlgbrnst.cpp, Line 1746
Burn process failed at 4x (600 KB/s)
1.21.50 #30 SPTI -1169 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1169)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x07
CDB Data: 0x1E 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 07
1.21.50 #31 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
1.21.50 #32 SPTI -1081 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1081)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x53
Sense Qual: 0x02
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 53 02
1.21.50 #33 SPTI -1169 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1169)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x07
CDB Data: 0x1E 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 07
1.21.50 #34 SPTI -1081 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1081)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x53
Sense Qual: 0x02
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 53 02
1.21.50 #35 Text 0 File Cdrdrv.cpp, Line 10467
DriveLocker: UnLockVolume completed
1.21.50 #36 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 14.06.00
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03/08/2004 22.59.42 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Questa invece è la schermata di errore che mi compare al 64% della verifica post-masterizzazione usando ImgBurn per bruciare una iso di un DVD
http://www.effedieffe.com/error.jpg
Che devo pensare???
vBulletin® v3.6.4, Copyright ©2000-2025, Jelsoft Enterprises Ltd.