View Full Version : Print server su reti Win/Mac, problemi
Salve, ho una rete wireless composta da vari PC e Mac, tutti perfettamente interagenti nelle funzioni di rete. Recentemente ho acquistato un print server wireless DLINK modello DPR 1260.
I problemi sono tutti riguardanti i Mac. Su PC l'installazione delle tre stampanti (una EPSON EPL 6200, un HP Laserjet 3600, una Epson 1160) e del Plotter (HP Designjet 500PS) è avvenuta con successo, infatti attualmente utilizziamo un PC solo per le stampe. I problemi riguardano invece i Mac
Dal pannello di controllo, stampanti e fax ho provato ad aggiungere le stampanti di rete, utilizzando tutti i protocolli possibili, fermo restando l'indirizzo corretto del print server, la coda (che rappresenta la porta utilizzata nel print server) e come modello una generica post script, visto che il listone non propone molte stampanti che possiedo.
L'indirizzo viene correttamente risolto e interpretato, ma durante lo spool di stampa il processo si interrompe a una certa percentuale e alle stampanti non arrivano dati. Qualcuno riesce a darmi qualche dritta? Grazie.
Woow quanti power user :D
La stessa domanda su PC ha ricevuto 40 risposte altrove :D
PowerUser è una parola grossa nel mondo Mac, si contano sulla punta delle dita: io ho problemi analoghi con l'individuazione della stampante connessa ad un pc WinVista, altro casino bestiale, oltretutto i cosiddetti PowerUser non fanno che dirmi di abbandonare win e comprare tutti mac per la rete.....ma si può essere più ottusi?
killbill
27-08-2007, 16:24
nessuno che sappia aiutare il mio amico peppe?:( io sono troppo un newbie:fagiano:
lollo_rock
10-09-2007, 23:18
prova a configurare prima la rete sui mac, e poi sui pc...
prova a configurare prima la rete sui mac, e poi sui pc...
In realtà il PC è entrato in rete dopo, la rete era già composta da 2 mini, 2 G5, un HD di rete e un plotter Ethernet e in generale tutta la rete funziona perfettamente. Quello che mi serve però è poter stampare da qualunque postazione, sia PC che MAC.
Stavo pensando di buttare il print server e utilizzare un vecchio G4 come print server, ossia collegare tutte le stampanti al G4 e attivare la condivisione. Ma in questo modo vi chiedo, il PC vedrà tutte le stampanti?
lollo_rock
11-09-2007, 08:06
teoricamente, se l'ethernet è configurato bene, non dovresti avere problemi con una rete pc-mac comunque facci sapere (e il print server tienilo per un po)
killbill
11-09-2007, 09:32
io ho la stampante attaccata al macbook e stampo dal pc tranquillamente usando un utility della adobe, la Adobe Postscript;)
Ma in questo modo vi chiedo, il PC vedrà tutte le stampanti?
Si, e senza problemi.
Se vuoi una piccola guida sul come fare: http://www.hwupgrade.it/forum/showpost.php?p=16171602&postcount=3
Non essendo un PoweUser, sono comunque riuscito ad aprire Google e trovare nel primo link questo:
"I have this print server working successfully on my MacBook and sharing with a 2 other PC's over a wireless network on a HP1200 Laserjet (Mac OSX 10.4.8) and Windows XP.
I'm runnning a Belkin Wireless G router.
Configuring the Mac once the server was installed (via the PC not the Mac) I used Line Printer Daemon, a static IP address for the printer 192.168.2.10, and the print queue must have the same name as the print server has set up, which ended up being automatically 'Laserjet1200'. This must match between the Mac and the PRT server. Then install the printer by selecting your printer from the "add" printer list in the Mac set up screen in the printer utility. The important thing was to name the print queue when configuring the Mac. If you are not sure you can type in the IP address of your printer (in my case 192.168.2.10) into Firefox or Safari and when it brings the PRT Server information up it will show the name of the queue.
All printers work well now and this can be done......even though many posts have had some negative experieicnes. It is not easy though. The D-Link hardware is not easy to configure (took me 4 hrs all said and done)...."
Si, e senza problemi.
Se vuoi una piccola guida sul come fare: http://www.hwupgrade.it/forum/showpost.php?p=16171602&postcount=3
Non essendo un PoweUser, sono comunque riuscito ad aprire Google e trovare nel primo link questo:
"I have this print server working successfully on my MacBook and sharing with a 2 other PC's over a wireless network on a HP1200 Laserjet (Mac OSX 10.4.8) and Windows XP.
I'm runnning a Belkin Wireless G router.
Configuring the Mac once the server was installed (via the PC not the Mac) I used Line Printer Daemon, a static IP address for the printer 192.168.2.10, and the print queue must have the same name as the print server has set up, which ended up being automatically 'Laserjet1200'. This must match between the Mac and the PRT server. Then install the printer by selecting your printer from the "add" printer list in the Mac set up screen in the printer utility. The important thing was to name the print queue when configuring the Mac. If you are not sure you can type in the IP address of your printer (in my case 192.168.2.10) into Firefox or Safari and when it brings the PRT Server information up it will show the name of the queue.
All printers work well now and this can be done......even though many posts have had some negative experieicnes. It is not easy though. The D-Link hardware is not easy to configure (took me 4 hrs all said and done)...."
Perfetto, vi fo sapere grazie intanto.
vBulletin® v3.6.4, Copyright ©2000-2025, Jelsoft Enterprises Ltd.