Fantasydj
25-06-2007, 21:58
raga ho una QDI kudoz 7x/600 sto cercando i driver di questa sk madre e ho trovato questi:http://www.qdigrp.com/qdisite/driver/KD7X600_V1.3LCP.zip
li ho scaricati ma non capisco come istallarli...
questo è il file readme:
KD7X/600 BIOS V1.3LCP release note.
This disk contains three files:K76AV13.BIN,README.TXT and AWDFLASH.EXE
1.The checksum of K76AV13.BIN is 59ED(Hex) ;
2. How to use AWDFLASH.EXE utility:
This is a flash memory write/read utility.
IMPORTANT NOTE:
The AWDFLASH utility could not correctly run in windows (virtual 8086)
MS-DOS mode. It must be proceeded with the following steps:
1.Create a bootable system floppy diskette by typing "FORMAT A:/S"
from the dos prompt under DOS6.XX or WINDOWS9X environment.
2.Boot system with diskette.
3.Then run the AWDFLASH utility.
Usage:
AWDFLASH [BIOSfile1] [BIOSfile2] [/<sw>[/<sw>...]]
BIOSfile1: New BIOS Name For FLASH Programming
BIOSfile2: BIOS File For Backing-up the Original BIOS
<command> function definition:
/cc: clear CMOS; /cp: clear PnP; /cd: clear DMI.
/sn: No Original BIOS Backup. If this option is chosen:
Be sure your new BIOS is compatible with your M/B. If not, the system
are damaged.
/sy: Backup Original BIOS to Disk File.
Examples:
AWDFLASH ****.BIN /py/sn/cd/cp
Warning:
Avoid power-off incidently in upgrading procedure, or system would fail
to reboot!
UPDATE DATE:12/23/2003
vi prego di aiutarmi spiegandomi in parole povere cosa devo fare x istallare sti benedetti driver graazie!
li ho scaricati ma non capisco come istallarli...
questo è il file readme:
KD7X/600 BIOS V1.3LCP release note.
This disk contains three files:K76AV13.BIN,README.TXT and AWDFLASH.EXE
1.The checksum of K76AV13.BIN is 59ED(Hex) ;
2. How to use AWDFLASH.EXE utility:
This is a flash memory write/read utility.
IMPORTANT NOTE:
The AWDFLASH utility could not correctly run in windows (virtual 8086)
MS-DOS mode. It must be proceeded with the following steps:
1.Create a bootable system floppy diskette by typing "FORMAT A:/S"
from the dos prompt under DOS6.XX or WINDOWS9X environment.
2.Boot system with diskette.
3.Then run the AWDFLASH utility.
Usage:
AWDFLASH [BIOSfile1] [BIOSfile2] [/<sw>[/<sw>...]]
BIOSfile1: New BIOS Name For FLASH Programming
BIOSfile2: BIOS File For Backing-up the Original BIOS
<command> function definition:
/cc: clear CMOS; /cp: clear PnP; /cd: clear DMI.
/sn: No Original BIOS Backup. If this option is chosen:
Be sure your new BIOS is compatible with your M/B. If not, the system
are damaged.
/sy: Backup Original BIOS to Disk File.
Examples:
AWDFLASH ****.BIN /py/sn/cd/cp
Warning:
Avoid power-off incidently in upgrading procedure, or system would fail
to reboot!
UPDATE DATE:12/23/2003
vi prego di aiutarmi spiegandomi in parole povere cosa devo fare x istallare sti benedetti driver graazie!