PDA

View Full Version : [ar+sp] DFI Nf3 lanparty ultra-d + dissi northbridge, GAINWARD 6800le@6800gt agp


guns81
15-05-2007, 07:46
come da titolo vendo questi 2 componenti:

DFI LANPARTY NF3 ULTRA-D con scatola mascherina e manuale + DISSI NORTHBRIDGE THERMALTAKE con regolatore di velocità 50€

Specification
CPU


# AMD® Athlon 64 X2 / Athlon 64 FX / Athlon 64 / Sempron
# Socket 939

Front Side Bus


# 2000MT/s HyperTransport interface

Chipset


# nVIDIA® nForce3 Ultra

Memory


# Four 184-pin DDR SDRAM DIMM sockets
# Supports dual channel (128-bit wide) memory interface
# Supports up to 4GB system memory
# Supports PC2100 (DDR266), PC2700 (DDR333) and PC3200 (DDR400) DDR SDRAM DIMM

Expansion Slots


# 1 AGP 8x/4x slot
# 5 PCI slots

BIOS


# Award BIOS
# CPU/DRAM/AGP overclocking
# CPU/DRAM/Chipset overvoltage
# 4Mbit flash memory
# AMD Cool‘n’Quiet technology

Power Management


# Supports ACPI STR (Suspend to RAM) function
# Wake-On-Events include: - Wake-On-PS/2 Keyboard/Mouse - Wake-On-Ring (external modem) - Wake-On-LAN - RTC timer to power-on the system
# AC power failure recovery

Hardware Monitor


# Monitors CPU/system temperature
# Monitors VCC3/5V/12V/5Vsb/Vbat voltages
# Monitors the speed of the cooling fans
# CPU Overheat Protection function monitors CPU temperature during system boot-up

Audio


# Realtek 6-channel audio CODEC
# S/PDIF-in/out interface

LAN


# Gigabit PHY
# Fully compliant to IEEE 802.3 (10BASE-T), 802.3u (100BASE-TX) and 802.3ab (1000BASE-T) standards

IDE


# Two IDE connectors support four UltraDMA 133Mbps hard drives
# NVIDIA RAID allows RAID arrays spanning across Serial ATA and Parallel ATA
# RAID 0, RAID 1, RAID 0+1 and JBOD

Serial ATA with RAID


# Four Serial ATA interfaces with speed up to 1.5Gbps - Two Serial ATA ports supported by nForce3 Ultra chip - Two Serial ATA ports supported by Marvell SATA PHY
# NVIDIA RAID allows RAID arrays spanning across Serial ATA and Parallel ATA
# RAID 0, RAID 1, RAID 0+1 and JBOD

IEEE 1394


# VIA VT6307 controller
# Supports two 100/200/400 Mb/sec ports

AGP


# Supports AGP 8x up to 2132MB/sec. and AGP 4x up to 1066MB/sec. bandwidth for 3D graphics applications
# Supports 0.8/1.5V add-in cards

Rear Panel I/O Ports


# 1 PS/2 mouse port
# 1 PS/2 keyboard port
# 1 DB-25 parallel port
# 2 S/PDIF RCA jacks (S/PDIF-in and S/PDIF-out)
# 1 DB-9 serial port
# 1 IEEE 1394 port
# 1 RJ45 LAN port
# 4 USB 2.0/1.1 ports
# Line-in, line-out and mic-in jacks

I/O Connectors


# 2 connectors for 4 additional external USB 2.0/1.1 ports
# 1 connector for 1 external IEEE 1394 port
# 1 front audio connector for external line-out and mic-in jacks
# 1 CD-in internal audio connector
# 1 S/PDIF connector for optical cable connection
# 1 IrDA connector
# 4 Serial ATA connectors
# 2 IDE connectors
# 1 floppy connector
# 1 20-pin ATX power connector
# 1 4-pin ATX 12V power connector
# 1 front panel connector
# 3 fan connectors
# EZ touch switches (power switch and reset switch)

PCB


# ATX form factor
# 30.5cm (12") x 24cm (9.44")
http://us.dfi.com.tw/Upload/Product_Picture/UT%20nF3%20ULTRA-D.jpg

gainward 6800le agp con scatola cavi ancora imbustati cd driver e tutto moddabiole @ gt ma nn ho fatto test di stabilità ho visto solo che erano attivabili le pipe 75€

QUI (http://www.hwupgrade.it/forum/showthread.php?t=1469732) 3500+ in vendita

RULES
-sconti per blocchi sostanziosi
-precedenza blocchi
-precedenza scambio a mano
-SE IL PREZZO E' TROPPO ALTO CONTATTATEMI IN PVT
-TUTTI I PREZZI SONO SENZA SS
-Meglio PostePay

Calex81
15-05-2007, 09:59
garanzia??Intanto coda a 65

guns81
15-05-2007, 11:25
per cosa? vga? è senza garanzia credo guardo nella scatola se c'è qualche fattura ma è perfettametne funzionante...cmq preferirei vendere in blocco!

bombardax
16-05-2007, 09:22
confermo anche qui il mio interesse per la MoBo al tuo prezzo...
grazie
Antonio

guns81
17-05-2007, 13:44
venduto tutto a Silvio81

Dragonero87
12-03-2008, 10:55
coda scheda madre,disponibile?

hard_one
12-03-2008, 11:58
coda per la MObo DFI