PDA

View Full Version : SCHEDA MADRE FUJITSU-SIEMENS D1382


caudullo
30-04-2007, 11:19
Salve ragazzi!
Ho una scheda madre della FUJITSU SIEMENS modello D1382 della quale sotto trovate le caratteristiche.
Volevo sapere due cose:(scusate l'ingoranza e se le domande vi sembreranno stupide)

1- fino a quante RAM posso mettere e di che tipo?
2- Qual'è la migliore scheda VIDEO in commercio che la mia misera scheda madre può supportare?

Caratteristiche:

 System board in ATX format

 Intel processor Pentium 4
Intel chipset 845G

 Intel 82562 LAN controller (10/100 Mbit/s) with RJ45 interface WOL with Magic Packet is supported, as is booting from LAN with InCom LAN BootP or Intel PXE.

 VGA: 24 bit and 350 MHz RAMDAC; Dynamic Video Memory (DVM)

 Analogue Devices AD1981A (AC'97) Audio Codec internal: Stereo CD-In, Audio front panel external: Mono Micro-In, Stereo Line-In, Stereo Line-Out

 2 DIMM slots for 128 MB up to 2 GB main memory (DDR-DIMM memory modules meet the PC2100 specification) without ECC

 Fujitsu Siemens Computers Systemüberwachung und Temperaturüberwachung

 Flash BIOS

 Power-on functions:

 Wake on RTC

 Wake on LAN

 Wake on PCI Cards

 Wake on USB

 COM1 wake up support (standby)

 Energy saving functions:

 APM and ACPI (requires an operating system that supports ACPI)

 Switching on/off, standby mode, suspend mode via on/off switch

 Switching on/off via software

 Security functions:

 Processor serial number

 Cover monitoring: cover monitoring reports when the cover has been opened without authorisation.

 System, Setup and Keyboard password

 parallel and serial ports can be deactivated

 Floppy disk write-protection via BIOS Setup

 Boot hard disk virus warning function

 Flash BIOS and EEPROMs (on the memory modules) virus protection function.

 1 PCI slots PCI slots support 3.3 V main and auxiliary voltages. Features

 1 AGP slot The AGP slot supports 4x AGP mode. Only AGP boards with 1.5 V are supported.

 IDE hard disk controller connected to PCI bus for up to four IDE drives (e.g. IDE hard disk drives, ATAPI CD-ROM drives)

The IDE hard disk controller are ATA100, ultra DMA capable and support PIO modes 0-4.

 Floppy disk drive controller (possible formats: 720 KB, 1.44 MB, 2.88 MB)

 The system board supports booting from a 120 MB IDE floppy disk drive.

 Real-time clock/calendar with integrated battery backup

 4 internal USB ports (C / D and E / F)

 1 internal serial port for chipcard reader (SmartCard reader).

 1 external parallel port (ECP- and EPP-compatible)

 1 external serial port (16C550 compatible with FIFO)

 2 external PS/2 ports for keyboard and mouse

 2 external USB ports (A / B)

Maße : 243 mm x 245 mm

GRAZIEEEEEEEEEEE!!

P.S.=Non ditemi di buttare via tutto anche se lo meriterebbe!
Per diversi motivi devo e posso aggiornare solo questo sistema che ho!
AIUTOOOOOOO :D