Krywen
06-02-2007, 16:44
ho 2 masterizzatori: un plextor CD-RW SCSI e un altro DVD+RW collegato con il cavo ide.
ora da due settimane a questa parte non funzionano: quando provo a scivere qualcosa su disco sia DVD che su CD (su entrambi i masterizzatori) non ci riesco.
a volte quasi subito mi dà un generico errore di comunicazione (preciso che fino a qualche settimana fà funzionavano poi non sò cosa ci ho fatto), altre volte arriva fino al 30-40% di scrittura prima di darmi un qualche errore.
ho provato sia nero che CDburner PRO.
pensavo di cambiare ilcavo IDE ma mi pare strano che non funzioni neanche il masterizzatore SCSI.
inoltre i dischi li leggono bene ma non reisco a scriverci. ho già aggiornato i firmware
l'errore di nero (che dice ora che ho installato una nuove versione) è:
errore driver DMA. errore CRC
F: DVDRW IDE 16x
stato di scrittura non valido
F: DVDRW IDE 16x
non è possibile eseguire fine traccia
scrittura fallita a 4x
riporto il log di nero
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programmi\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12.54.32
NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2
Recorder: <DVDRW IDE 16X> Version: A07F - HA 1 TA 1 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 1 TA 2 - 7.0.1.2
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 6L080J4 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVDRW IDE 16X atapi Port 1 ID 0 DMA: On
DiskPeripheral : SAMSUNG SV0432A 010 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : PLEXTOR CD-R PX-W124TS1.07 asc Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
DVDRW IDE 16X F: CDRom1
PLEXTOR CD-R PX-W124TS G: CDRom0
Generic DVD-ROM H: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523504kB)
Free physical memory: 175MB (179660kB)
Memory in use : 65 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
6.2.2007
CD-ROM (ISO)
15.20.31 #1 Text 0 File Isodoc.cpp, Line 6411
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
15.20.31 #2 Text 0 File Burncd.cpp, Line 3008
DVDRW IDE 16X
Super Link attivato
15.20.31 #3 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 72704KB of Memory
15.20.31 #4 Text 0 File Reader.cpp, Line 124
Reader running
15.20.31 #5 Text 0 File Writer.cpp, Line 113
Writer F: DVDRW IDE 16X running
15.20.31 #6 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
15.20.31 #7 Text 0 File Burncd.cpp, Line 3302
Turn on Track-At-Once, using CD-R/RW media
15.20.31 #8 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 326909 ( 72:40.59)
15.20.31 #9 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
15.20.31 #10 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: DVDRW IDE 16X
15.20.31 #11 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
15.20.31 #12 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 326910 (326910) = #326910/72:38.60
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 326908 blocks [F: DVDRW IDE 16X]
--------------------------------------------------------------
15.20.31 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [F: DVDRW IDE 16X] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 669818880, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
326910 | lead-out | 1 | 0x41 | 0x00
15.20.31 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1127
Removed 2 run-out blocks from end of track 1. Length: 326910 -> 326908.
15.20.31 #15 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
15.20.31 #16 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
15.20.31 #17 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.
15.20.31 #18 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
15.20.31 #19 Phase 28 File dlgbrnst.cpp, Line 1725
Speed measurement started
15.20.31 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
15.22.38 #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
15.22.38 #22 Phase 29 File dlgbrnst.cpp, Line 1674
Speed measurement completed: 39x (5.850 KB/s)
15.22.38 #23 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 4x (600 KB/s)
15.22.38 #24 SPTI -1189 File SCSIPassThrough.cpp, Line 323
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1189)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x02
CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 02
Buffer x05977200: Len x4000
15.22.38 #25 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
15.22.38 #26 Text 0 File MMC.cpp, Line 21611
Set BUFE: Super Link -> ON
15.25.37 #27 SPTI -1502 File SCSIPassThrough.cpp, Line 323
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1502)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 B9 40 00 00 20 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 08 03
Buffer x03fb0000: Len x10000
0xBB 7B CD DB B9 EE 93 B2 77 79 F7 24 C4 B1 DD CF
0xB6 9E 3A E9 5C 5B CB B8 2B EE EE 49 CF 73 4D 24
0x4D BA 5B 4E FB 85 6E 7D E4 F2 DE 9D 9B B4 B5 13
15.25.37 #28 CDR -1502 File Writer.cpp, Line 302
DMA-driver error, CRC error
F: DVDRW IDE 16X
15.25.37 #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
15.25.38 #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
15.25.42 #31 CDR -201 File WriterStatus.cpp, Line 200
Invalid write state
F: DVDRW IDE 16X
15.25.42 #32 TRANSFER -18 File WriterStatus.cpp, Line 200
Could not perform EndTrack
15.25.42 #33 Text 0 File MMC.cpp, Line 16379
<DVDRW IDE 16X > start Close Session
15.27.19 #34 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 4x (600 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19/05/2006 22.16.24
File 'Drivers\PXHELP20.SYS': Ver=3.00.43J, size=36624 bytes, created 26/01/2007 2.19.00 (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03/08/2004 21.59.42 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
thks
ora da due settimane a questa parte non funzionano: quando provo a scivere qualcosa su disco sia DVD che su CD (su entrambi i masterizzatori) non ci riesco.
a volte quasi subito mi dà un generico errore di comunicazione (preciso che fino a qualche settimana fà funzionavano poi non sò cosa ci ho fatto), altre volte arriva fino al 30-40% di scrittura prima di darmi un qualche errore.
ho provato sia nero che CDburner PRO.
pensavo di cambiare ilcavo IDE ma mi pare strano che non funzioni neanche il masterizzatore SCSI.
inoltre i dischi li leggono bene ma non reisco a scriverci. ho già aggiornato i firmware
l'errore di nero (che dice ora che ho installato una nuove versione) è:
errore driver DMA. errore CRC
F: DVDRW IDE 16x
stato di scrittura non valido
F: DVDRW IDE 16x
non è possibile eseguire fine traccia
scrittura fallita a 4x
riporto il log di nero
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programmi\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12.54.32
NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2
Recorder: <DVDRW IDE 16X> Version: A07F - HA 1 TA 1 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 1 TA 2 - 7.0.1.2
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 6L080J4 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVDRW IDE 16X atapi Port 1 ID 0 DMA: On
DiskPeripheral : SAMSUNG SV0432A 010 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : PLEXTOR CD-R PX-W124TS1.07 asc Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
DVDRW IDE 16X F: CDRom1
PLEXTOR CD-R PX-W124TS G: CDRom0
Generic DVD-ROM H: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523504kB)
Free physical memory: 175MB (179660kB)
Memory in use : 65 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
6.2.2007
CD-ROM (ISO)
15.20.31 #1 Text 0 File Isodoc.cpp, Line 6411
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
15.20.31 #2 Text 0 File Burncd.cpp, Line 3008
DVDRW IDE 16X
Super Link attivato
15.20.31 #3 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 72704KB of Memory
15.20.31 #4 Text 0 File Reader.cpp, Line 124
Reader running
15.20.31 #5 Text 0 File Writer.cpp, Line 113
Writer F: DVDRW IDE 16X running
15.20.31 #6 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
15.20.31 #7 Text 0 File Burncd.cpp, Line 3302
Turn on Track-At-Once, using CD-R/RW media
15.20.31 #8 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 326909 ( 72:40.59)
15.20.31 #9 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
15.20.31 #10 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: DVDRW IDE 16X
15.20.31 #11 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
15.20.31 #12 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 326910 (326910) = #326910/72:38.60
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 326908 blocks [F: DVDRW IDE 16X]
--------------------------------------------------------------
15.20.31 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [F: DVDRW IDE 16X] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 669818880, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
326910 | lead-out | 1 | 0x41 | 0x00
15.20.31 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1127
Removed 2 run-out blocks from end of track 1. Length: 326910 -> 326908.
15.20.31 #15 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
15.20.31 #16 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
15.20.31 #17 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.
15.20.31 #18 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
15.20.31 #19 Phase 28 File dlgbrnst.cpp, Line 1725
Speed measurement started
15.20.31 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
15.22.38 #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
15.22.38 #22 Phase 29 File dlgbrnst.cpp, Line 1674
Speed measurement completed: 39x (5.850 KB/s)
15.22.38 #23 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 4x (600 KB/s)
15.22.38 #24 SPTI -1189 File SCSIPassThrough.cpp, Line 323
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1189)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x02
CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 02
Buffer x05977200: Len x4000
15.22.38 #25 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
15.22.38 #26 Text 0 File MMC.cpp, Line 21611
Set BUFE: Super Link -> ON
15.25.37 #27 SPTI -1502 File SCSIPassThrough.cpp, Line 323
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1502)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 B9 40 00 00 20 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 08 03
Buffer x03fb0000: Len x10000
0xBB 7B CD DB B9 EE 93 B2 77 79 F7 24 C4 B1 DD CF
0xB6 9E 3A E9 5C 5B CB B8 2B EE EE 49 CF 73 4D 24
0x4D BA 5B 4E FB 85 6E 7D E4 F2 DE 9D 9B B4 B5 13
15.25.37 #28 CDR -1502 File Writer.cpp, Line 302
DMA-driver error, CRC error
F: DVDRW IDE 16X
15.25.37 #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
15.25.38 #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
15.25.42 #31 CDR -201 File WriterStatus.cpp, Line 200
Invalid write state
F: DVDRW IDE 16X
15.25.42 #32 TRANSFER -18 File WriterStatus.cpp, Line 200
Could not perform EndTrack
15.25.42 #33 Text 0 File MMC.cpp, Line 16379
<DVDRW IDE 16X > start Close Session
15.27.19 #34 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 4x (600 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19/05/2006 22.16.24
File 'Drivers\PXHELP20.SYS': Ver=3.00.43J, size=36624 bytes, created 26/01/2007 2.19.00 (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03/08/2004 21.59.42 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
thks