Ci avviciniamo...il resto della memoria dovrebbe essere in parte utilizzata da kernel code & (static) data, e un'altra parte da dati interni del kernel non swappabili (compresi i driver; lsmod ti fornisce la dimensione dei dati e codice statici, poi ci sono i dati allocati).
Puoi allegare anche un dmesg completo?
marco@laptop:~$ dmesg
[17179569.184000] Linux version 2.6.17-10-386 (root@terranova) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 Tue Dec 5 22:26:18 UTC 2006 (Ubuntu 2.6.17-10.34-386)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[17179569.184000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000c0000 - 00000000000cc000 (reserved)
[17179569.184000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 0000000025ef0000 (usable)
[17179569.184000] BIOS-e820: 0000000025ef0000 - 0000000025eff000 (ACPI data)
[17179569.184000] BIOS-e820: 0000000025eff000 - 0000000025f00000 (ACPI NVS)
[17179569.184000] BIOS-e820: 0000000025f00000 - 0000000026000000 (usable)
[17179569.184000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 608MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 155648
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] Normal zone: 151552 pages, LIFO batch:31
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 PTLTD ) @ 0x000f72b0
[17179569.184000] ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x25efbfd8
[17179569.184000] ACPI: FADT (v001 VT8606 twisterT 0x06040000 PTL_ 0x000f4240) @ 0x25efef8c
[17179569.184000] ACPI: DSDT (v001 COMPAL CY23 0x06040000 MSFT 0x0100000d) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x8008
[17179569.184000] Allocating PCI resources starting at 30000000 (gap: 26000000:d9f80000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=UUID=1f715e71-8e2d-dc7d-bc84-29fd11b96999 ro quiet splash elevator=cfq rootflags=data=writeback
[17179569.184000] Local APIC disabled by BIOS (or by default) -- you can enable it with "lapic"
[17179569.184000] mapped APIC to ffffd000 (014c3000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[17179569.184000] Detected 1392.900 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179570.144000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179570.148000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179570.192000] Memory: 605588k/622592k available (1829k kernel code, 16264k reserved, 1038k data, 288k init, 0k highmem)
[17179570.192000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179570.272000] Calibrating delay using timer specific routine.. 2788.14 BogoMIPS (lpj=5576291)
[17179570.272000] Security Framework v1.0.0 initialized
[17179570.272000] SELinux: Disabled at boot.
[17179570.272000] Mount-cache hash table entries: 512
[17179570.272000] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[17179570.272000] CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[17179570.272000] CPU: L1 I cache: 16K, L1 D cache: 16K
[17179570.272000] CPU: L2 cache: 512K
[17179570.272000] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
[17179570.272000] CPU: Intel(R) Pentium(R) III CPU family 1400MHz stepping 01
[17179570.272000] Checking 'hlt' instruction... OK.
[17179570.288000] SMP alternatives: switching to UP code
[17179570.288000] Freeing SMP alternatives: 0k freed
[17179570.288000] checking if image is initramfs... it is
[17179571.160000] Freeing initrd memory: 7025k freed
[17179571.160000] ACPI: Core revision 20060707
[17179571.160000] ACPI: Looking for DSDT ... not found!
[17179571.160000] ACPI: setting ELCR to 0200 (from 0c20)
[17179571.172000] NET: Registered protocol family 16
[17179571.172000] EISA bus registered
[17179571.172000] ACPI: bus type pci registered
[17179571.172000] PCI: PCI BIOS revision 2.10 entry at 0xfd80e, last bus=1
[17179571.172000] PCI: Using configuration type 1
[17179571.172000] Setting up standard PCI resources
[17179571.188000] ACPI: Interpreter enabled
[17179571.188000] ACPI: Using PIC for interrupt routing
[17179571.188000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179571.188000] PCI: Probing PCI hardware (bus 00)
[17179571.208000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:07.1
[17179571.208000] PCI quirk: region 8100-810f claimed by vt82c686 SMB
[17179571.208000] Boot video device is 0000:01:00.0
[17179571.208000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179571.212000] ACPI: Embedded Controller [EC0] (gpe 6) interrupt mode.
[17179571.212000] ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
[17179571.212000] ACPI: PCI Interrupt Link [LNKB] (IRQs *11)
[17179571.212000] ACPI: PCI Interrupt Link [LNKC] (IRQs *5 9 10 11)
[17179571.212000] ACPI: PCI Interrupt Link [LNKD] (IRQs *11)
[17179571.252000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PPB_._PRT]
[17179571.252000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179571.252000] pnp: PnP ACPI init
[17179571.272000] pnp: PnP ACPI: found 10 devices
[17179571.272000] PnPBIOS: Disabled by ACPI PNP
[17179571.272000] PCI: Using ACPI for IRQ routing
[17179571.272000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179571.272000] pnp: 00:06: ioport range 0x4d0-0x4d1 has been reserved
[17179571.272000] pnp: 00:06: ioport range 0x8000-0x807f could not be reserved
[17179571.272000] PCI: Bridge: 0000:00:01.0
[17179571.272000] IO window: disabled.
[17179571.272000] MEM window: e8100000-e81fffff
[17179571.272000] PREFETCH window: f0000000-f7ffffff
[17179571.272000] PCI: Bus 2, cardbus bridge: 0000:00:04.0
[17179571.272000] IO window: 00002000-000020ff
[17179571.272000] IO window: 00002400-000024ff
[17179571.272000] PREFETCH window: 30000000-31ffffff
[17179571.272000] MEM window: 32000000-33ffffff
[17179571.272000] PCI: Bus 6, cardbus bridge: 0000:00:04.1
[17179571.272000] IO window: 00002800-000028ff
[17179571.272000] IO window: 00002c00-00002cff
[17179571.272000] PREFETCH window: 34000000-35ffffff
[17179571.272000] MEM window: 36000000-37ffffff
[17179571.272000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179571.272000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[17179571.272000] PCI: setting IRQ 10 as level-triggered
[17179571.272000] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
[17179571.272000] PCI: Setting latency timer of device 0000:00:04.0 to 64
[17179571.272000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[17179571.272000] PCI: setting IRQ 11 as level-triggered
[17179571.272000] ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[17179571.272000] PCI: Setting latency timer of device 0000:00:04.1 to 64
[17179571.272000] NET: Registered protocol family 2
[17179571.308000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179571.308000] TCP established hash table entries: 131072 (order: 7, 524288 bytes)
[17179571.308000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[17179571.312000] TCP: Hash tables configured (established 131072 bind 65536)
[17179571.312000] TCP reno registered
[17179571.312000] audit: initializing netlink socket (disabled)
[17179571.312000] audit(1170171509.312:1): initialized
[17179571.312000] VFS: Disk quotas dquot_6.5.1
[17179571.312000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179571.312000] Initializing Cryptographic API
[17179571.312000] io scheduler noop registered
[17179571.312000] io scheduler anticipatory registered
[17179571.312000] io scheduler deadline registered
[17179571.312000] io scheduler cfq registered (default)
[17179571.312000] PCI: Disabling Via external APIC routing
[17179571.312000] isapnp: Scanning for PnP cards...
[17179571.668000] isapnp: No Plug & Play device found
[17179571.704000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179571.708000] mice: PS/2 mouse device common for all mice
[17179571.708000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179571.708000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179571.708000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179571.708000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179571.720000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179571.724000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179571.724000] EISA: Probing bus 0 at eisa.0
[17179571.724000] Cannot allocate resource for EISA slot 1
[17179571.724000] Cannot allocate resource for EISA slot 2
[17179571.724000] Cannot allocate resource for EISA slot 8
[17179571.724000] EISA: Detected 0 cards.
[17179571.724000] TCP bic registered
[17179571.724000] NET: Registered protocol family 1
[17179571.724000] NET: Registered protocol family 8
[17179571.724000] NET: Registered protocol family 20
[17179571.724000] Using IPI Shortcut mode
[17179571.724000] ACPI: (supports S0 S1 S3 S4 S5)
[17179571.724000] Freeing unused kernel memory: 288k freed
[17179571.768000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179572.888000] Capability LSM initialized
[17179572.936000] ACPI: CPU0 (power states: C1[C1] C2[C2])
[17179572.936000] ACPI: Processor [CPU0] (supports 16 throttling states)
[17179572.936000] ACPI: Thermal Zone [THRM] (45 C)
[17179573.364000] VP_IDE: IDE controller at PCI slot 0000:00:07.1
[17179573.364000] VP_IDE: chipset revision 6
[17179573.364000] VP_IDE: not 100% native mode: will probe irqs later
[17179573.364000] VP_IDE: VIA vt82c686b (rev 42) IDE UDMA100 controller on pci0000:00:07.1
[17179573.364000] ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, hdb:pio
[17179573.364000] ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:DMA, hdd:pio
[17179573.364000] Probing IDE interface ide0...
[17179573.784000] hda: HTS721080G9AT00, ATA DISK drive
[17179574.456000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179574.472000] Probing IDE interface ide1...
[17179575.336000] hdc: TOSHIBA DVD-ROM SD-R2102, ATAPI CD/DVD-ROM drive
[17179575.672000] ide1 at 0x170-0x177,0x376 on irq 15
[17179575.688000] hda: max request size: 512KiB
[17179575.696000] hda: 156301488 sectors (80026 MB) w/7539KiB Cache, CHS=16383/255/63, UDMA(100)
[17179575.696000] hda: cache flushes supported
[17179575.696000] hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
[17179575.800000] hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179575.800000] Uniform CD-ROM driver Revision: 3.20
[17179576.220000] ieee1394: Initialized config rom entry `ip1394'
[17179576.224000] PCI: Enabling device 0000:00:0d.0 (0010 -> 0012)
[17179576.228000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
[17179576.228000] PCI: setting IRQ 5 as level-triggered
[17179576.228000] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
[17179576.276000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[e8004000-e80047ff] Max Packet=[2048] IR/IT contexts=[4/8]
[17179576.308000] usbcore: registered new driver usbfs
[17179576.308000] usbcore: registered new driver hub
[17179576.312000] USB Universal Host Controller Interface driver v3.0
[17179576.312000] PCI: Enabling device 0000:00:07.2 (0010 -> 0011)
[17179576.312000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[17179576.312000] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[17179576.312000] uhci_hcd 0000:00:07.2: UHCI Host Controller
[17179576.312000] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[17179576.312000] uhci_hcd 0000:00:07.2: irq 11, io base 0x00001020
[17179576.312000] usb usb1: configuration #1 chosen from 1 choice
[17179576.312000] hub 1-0:1.0: USB hub found
[17179576.312000] hub 1-0:1.0: 2 ports detected
[17179576.784000] usb 1-2: new full speed USB device using uhci_hcd and address 2
[17179576.936000] usb 1-2: configuration #1 chosen from 1 choice
[17179576.940000] hub 1-2:1.0: USB hub found
[17179576.940000] hub 1-2:1.0: 4 ports detected
[17179577.012000] hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
[17179577.012000] hdc: packet command error: error=0x50 { LastFailedSense=0x05 }
[17179577.012000] ide: failed opcode was: unknown
[17179577.016000] hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
[17179577.016000] hdc: packet command error: error=0x50 { LastFailedSense=0x05 }
[17179577.016000] ide: failed opcode was: unknown
[17179577.164000] Attempting manual resume
[17179577.200000] ReiserFS: hda6: found reiserfs format "3.6" with standard journal
[17179577.256000] usb 1-2.1: new low speed USB device using uhci_hcd and address 3
[17179577.392000] usb 1-2.1: configuration #1 chosen from 1 choice
[17179577.412000] usbcore: registered new driver hiddev
[17179577.428000] input: Logitech USB Optical Mouse as /class/input/input1
[17179577.428000] input: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:07.2-2.1
[17179577.428000] usbcore: registered new driver usbhid
[17179577.428000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179577.548000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f25190035d5]
[17179578.700000] ReiserFS: hda6: using writeback data mode
[17179578.712000] ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[17179578.716000] ReiserFS: hda6: checking transaction log (hda6)
[17179578.760000] ReiserFS: hda6: Using r5 hash to sort names
[17179594.540000] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
[17179594.540000] Yenta: CardBus bridge found at 0000:00:04.0 [14c0:0012]
[17179594.540000] Yenta O2: res at 0x94/0xD4: c8/00
[17179594.540000] Yenta O2: enabling read prefetch/write burst
[17179594.628000] Real Time Clock Driver v1.12ac
[17179594.692000] Yenta: ISA IRQ mask 0x0098, PCI irq 10
[17179594.692000] Socket status: 30000006
[17179594.692000] ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[17179594.692000] Yenta: CardBus bridge found at 0000:00:04.1 [14c0:0012]
[17179594.712000] Linux Tulip driver version 1.1.14 (May 6, 2006)
[17179594.740000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179594.808000] input: PS/2 Mouse as /class/input/input2
[17179594.820000] Yenta: ISA IRQ mask 0x0098, PCI irq 11
[17179594.820000] Socket status: 30000810
[17179594.840000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
[17179594.852000] PCI: Enabling device 0000:00:11.0 (0012 -> 0013)
[17179594.852000] ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[17179594.852000] tulip0: MII transceiver #1 config 3100 status 7849 advertising 05e1.
[17179594.852000] tulip0: MII transceiver #2 config 1000 status 7849 advertising 05e1.
[17179594.852000] tulip0: MII transceiver #3 config 1000 status 7849 advertising 05e1.
[17179594.852000] tulip0: MII transceiver #4 config 1000 status 7849 advertising 05e1.
[17179594.852000] eth0: ADMtek Comet rev 17 at Port 0x1c00, 00:90:96:2A:BA:20, IRQ 11.
[17179594.856000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179594.876000] Floppy drive(s): fd0 is 1.44M
[17179594.892000] FDC 0 is a post-1991 82077
[17179594.968000] via686a 0000:00:07.4: base address not set - upgrade BIOS or use force_addr=0xaddr
[17179595.000000] vt596_smbus 0000:00:07.4: SMBUS: Error: Host SMBus controller not enabled! - upgrade BIOS or use force=1
[17179595.112000] ltmodem: module license 'Proprietary' taints kernel.
[17179595.112000] Loading Lucent Modem Controller driver version 8.26-alk-8
[17179595.116000] PCI: Enabling device 0000:00:10.0 (0000 -> 0003)
[17179595.116000] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[17179595.116000] Detected Parameters Irq=11 BaseAddress=0x1800 ComAddress=0x1018
[17179595.116000] ttyLTM0 at I/O 0x1800 (irq = 11) is a Lucent/Agere Modem
[17179595.136000] Linux agpgart interface v0.101 (c) Dave Jones
[17179595.136000] agpgart: Detected VIA ProSavage PM133/PL133/PN133 chipset
[17179595.144000] agpgart: AGP aperture is 64M @ 0xec000000
[17179595.240000] input: PC Speaker as /class/input/input4
[17179595.356000] parport_pc: VIA 686A/8231 detected
[17179595.356000] parport_pc: probing current configuration
[17179595.356000] parport_pc: Current parallel port base: 0x0
[17179595.356000] parport_pc: VIA parallel port disabled in BIOS
[17179595.552000] pccard: PCMCIA card inserted into slot 1
[17179595.872000] ACPI: PCI Interrupt 0000:00:07.5[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
[17179595.872000] PCI: Setting latency timer of device 0000:00:07.5 to 64
[17179596.044000] ts: Compaq touchscreen protocol output
[17179596.340000] cs: IO port probe 0x100-0x3af: clean.
[17179596.340000] cs: IO port probe 0x3e0-0x4ff: clean.
[17179596.344000] cs: IO port probe 0x820-0x8ff: clean.
[17179596.344000] cs: IO port probe 0xc00-0xcf7: clean.
[17179596.344000] cs: IO port probe 0xa00-0xaff: clean.
[17179596.452000] cs: IO port probe 0x100-0x3af: clean.
[17179596.456000] cs: IO port probe 0x3e0-0x4ff: clean.
[17179596.456000] cs: IO port probe 0x820-0x8ff: clean.
[17179596.456000] cs: IO port probe 0xc00-0xcf7: clean.
[17179596.460000] cs: IO port probe 0xa00-0xaff: clean.
[17179596.460000] cs: memory probe 0xa0000000-0xa0ffffff: clean.
[17179596.508000] pcmcia: registering new device pcmcia1.0
[17179597.120000] ieee80211_crypt: registered algorithm 'NULL'
[17179597.196000] hostap_cs: 0.4.4-kernel (Jouni Malinen <
[email protected]>)
[17179597.196000] hostap_cs: setting Vcc=33 (constant)
[17179597.196000] Checking CFTABLE_ENTRY 0x01 (default 0x01)
[17179597.196000] IO window settings: cfg->io.nwin=1 dflt.io.nwin=1
[17179597.196000] io->flags = 0x0046, io.base=0x0000, len=64
[17179597.196000] hostap_cs: Registered netdevice wifi0
[17179597.236000] hostap_cs: index 0x01: , irq 3, io 0x0100-0x013f
[17179597.432000] prism2_hw_init: initialized in 196 ms
[17179597.432000] wifi0: NIC: id=0x800c v1.0.0
[17179597.432000] wifi0: PRI: id=0x15 v1.0.7
[17179597.432000] wifi0: STA: id=0x1f v1.3.5
[17179597.436000] wifi0: defaulting to bogus WDS frame as a workaround for firmware bug in Host AP mode WDS
[17179597.436000] wifi0: registered netdevice wlan0
[17179597.476000] orinoco 0.15rc3 (David Gibson <
[email protected]>, Pavel Roskin <
[email protected]>, et al)
[17179597.480000] orinoco_cs 0.15rc3 (David Gibson <
[email protected]>, Pavel Roskin <
[email protected]>, et al)
[17179597.652000] lp: driver loaded but no devices found
[17179597.712000] SCSI subsystem initialized
[17179597.724000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[17179597.724000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179597.868000] Adding 626492k swap on /dev/hda5. Priority:-1 extents:1 across:626492k
[17179598.092000] wifi0: LinkStatus=1 (Connected)
[17179598.092000] wifi0: LinkStatus: BSSID=00:0c:e5:46:e1:67
[17179599.956000] NET: Registered protocol family 10
[17179599.956000] lo: Disabled Privacy Extensions
[17179599.956000] IPv6 over IPv4 tunneling driver
[17179604.500000] device-mapper: 4.6.0-ioctl (2006-02-17) initialised:
[email protected]
[17179605.132000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[17179605.224000] NTFS driver 2.1.27 [Flags: R/O MODULE].
[17179605.324000] NTFS volume version 3.1.
[17179606.692000] NET: Registered protocol family 17
[17179610.556000] eth1: no IPv6 routers present
[17179611.964000] ACPI: AC Adapter [ACAD] (on-line)
[17179612.084000] pcc_acpi: loading...
[17179612.104000] ACPI: Power Button (FF) [PWRF]
[17179612.104000] ACPI: Lid Switch [LID]
[17179612.104000] ACPI: Power Button (CM) [PWBN]
[17179612.180000] ibm_acpi: ec object not found
[17179612.228000] ACPI: Battery Slot [BAT1] (battery present)
[17179615.992000] [drm] Initialized drm 1.0.1 20051102
[17179615.996000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
[17179616.000000] [drm] Initialized savage 2.4.1 20050313 on minor 0
[17179616.000000] mtrr: 0xf0000000,0x8000000 overlaps existing 0xf0000000,0x2000000
[17179616.000000] mtrr: base(0xf2000000) is not aligned on a size(0x5000000) boundary
[17179616.004000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[17179616.004000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[17179616.004000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[17179621.696000] ip_tables: (C) 2000-2006 Netfilter Core Team
[17179621.824000] Netfilter messages via NETLINK v0.30.
[17179621.840000] ip_conntrack version 2.4 (4864 buckets, 38912 max) - 224 bytes per conntrack
[17179623.760000] Bluetooth: Core ver 2.8
[17179623.760000] NET: Registered protocol family 31
[17179623.760000] Bluetooth: HCI device and connection manager initialized
[17179623.760000] Bluetooth: HCI socket layer initialized
[17179623.800000] Bluetooth: L2CAP ver 2.8
[17179623.800000] Bluetooth: L2CAP socket layer initialized
[17179623.880000] Bluetooth: HIDP (Human Interface Emulation) ver 1.1-mh1
[17179623.928000] Bluetooth: RFCOMM socket layer initialized
[17179623.928000] Bluetooth: RFCOMM TTY layer initialized
[17179623.928000] Bluetooth: RFCOMM ver 1.7
marco@laptop:~$
Allora è un errore di gnome-system-monitor. 608 devono essere.