PDA

View Full Version : Router ADSL ZyXEL HW660-61:HELP


bavfay
04-01-2007, 12:53
english:
you can explains me this error because I cannot make updated it good explains to me the way and it is what this errur to look at the image
ita:
potete mi spiega quest'errore poiché non posso fare l'aggiornamento buono lo spiego il modo ed è che questo errur osservare l'immagine

http://img475.imageshack.us/img475/3489/imgcr4.jpg

bavfay
04-01-2007, 12:54
anche problema con esploratore Internet

stepvr
04-01-2007, 13:19
Hi bavfay,

your FTP procedure is correct but before <put> command use <bin> command as binary.
In alternative to FTP, you can use web interface of router to upgrade firmware. You find command in the maintenance section.

bavfay
04-01-2007, 15:58
thank you stepvr

even problem with web interface.
it does not accept not updated it with the Web
I think that there is an error.

please send me the procedure complete to make updated it

bavfay
04-01-2007, 17:02
look
http://www.m5zn.com/uploads/7510bcdefa.jpg (http://www.m5zn.com)

http://www.m5zn.com/uploads/bb856347cb.jpg (http://www.m5zn.com)

http://www.m5zn.com/uploads/4f5b3b7f53.jpg (http://www.m5zn.com)

bavfay
04-01-2007, 17:46
help me.

stepvr
04-01-2007, 18:55
Hi bavfay,

your firmware version is very old and probably you cannot directly jump to version PE10. Try again the FTP procedure as below (remember the bin command):

FTP File Upload Command from the DOS Prompt

1. Launch FTP <IP router>
2. press ENTER when prompted for a username
3. enter your password as requested (the default is "1234")
4. enter "bin" to set transfer mode to binary
5. use "put filename.bin ras" to transfer the firmware
6. enter "quit" to exit FTP prompt.

bavfay
04-01-2007, 20:47
:D :D think you is workinggggggggggggggggggg :D

stepvr
04-01-2007, 21:14
Welcome to forum. ;)

bavfay
04-01-2007, 21:35
oh nooooooooooo same problem with another version is work with telefonica version .and not working with zyxel version
i want uprgrade with standart version.
:cry: :cry: :cry: :cry:

stepvr
05-01-2007, 00:14
Please explain all details.
What means it works with "telefonica version" but it not work with "zyxel version"?

bavfay
06-01-2007, 14:55
thank you stepvr
i upgrade my router succes with firmware telinofina
well i want re-upgrade it with another firmware not accept the firmware
same probleme
http://img475.imageshack.us/img475/3489/imgcr4.jpg

stepvr
06-01-2007, 15:20
Is the router supplied from your ISP? The firmware may be an owner version of your ISP.

stepvr
06-01-2007, 19:37
Another suggest for you. Try to upgrade firmware starting from 1st version available and then upgrade in sequence. You can find all firmware here (ftp://ftp.zyxel.com/P-660HW-61/firmware). 1st release of firmware is P-660HW-61_3.40(PE.0)C0.

stepvr
07-01-2007, 23:17
Finally I found. Your Zyxel has a special edition of firmware supplied from Telefonica ISP. You can upgrade Zyxel 660HW to standard firmware if you use the console cable. You can find all procedure here (http://www.adslayuda.com/Zyxel650-14.html). Good luck.

bavfay
08-01-2007, 20:18
think you stepvr i trying now

bavfay
08-01-2007, 22:38
not work with firmware 340pe0c0 and i cant make the cable console is very dificalt

stepvr
08-01-2007, 22:52
... i cant make the cable console is very dificalt
Sorry, no other way. The console cable is the last chance or ship the 660HW in an hardware repair laboratory.

bavfay
09-01-2007, 23:58
ohh no
ok stepvr think you for your help

really are my teatcher