mikke
01-01-2007, 19:35
:)
salve a tutti,
problema fastidioso con una suse 10.0
la connessione di rete va con una scheda rete wireless su USB, precisamente una D-link DWl G132 fornita da telecom, come il router modem Alice w-gate.
uso il modulo driverloader, però all'avvio la connessione non parte automaticamente, perché?
inutile dire che le ho provate tutte, e che in YAST ho settato la connessione come da avviare automaticamente all'avvio del sistema.
Cmq riesco a farla partire se stacco la cheda USB e la riattacco facendo fare un relod al modulo driverloader
posto qui dmesg:
all'avvio non riesce ad avviare la connessione, dmesg da' questo:
driverloader: no version for "struct_module" found: kernel tainted.
driverloader: module license 'see LICENSE file; Copyright (c)2003-2004 Linuxant inc.' taints kernel.
driverloader: stack=8192/60/0 REGPARM
driverloader: a5agu.sys: 0xe194c000..0xe1991500 entry = e196f550 (pbase = 0x10000)
bootsplash: status on console 0 changed to on
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[drm] Initialized drm 1.0.0 20040925
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized radeon 1.16.0 20050311 on minor 0:
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
driverloader: NdisWriteErrorLogEntry: ErrorCode=OUT_OF_RESOURCES NumberOfErrorValues=4
driverloader: NdisWriteErrorLogEntry: ErrorValue 0=0xdda59008
driverloader: NdisWriteErrorLogEntry: ErrorValue 1=0x00000028
driverloader: NdisWriteErrorLogEntry: ErrorValue 2=0xdba70008
driverloader: NdisWriteErrorLogEntry: ErrorValue 3=0xdba70008
e più avanti
driverloader: ndisQueryInformation: 802_3_CURRENT_ADDRESS st=RESOURCES W=0 N=0
wlan0: failed to read MAC address!
wlan0: Failed to register net device (-12)
driverloader: probe of 4-2:1.0 failed with error -12
usbcore: registered new driver driverloader
usb 4-2: USB disconnect, address 2
usb 4-2: new high speed USB device using ehci_hcd and address 3
driverloader: athfmwdl.sys: 0xe12ef000..0xe12f9980 entry = e12f65e0 (pbase = 0x10000)
driverloader: OsUsbClaimInterface: usb_driver_claim_interface returned -16
driverloader: OsUsbClaimInterface: usb_driver_claim_interface returned -16
usb 4-2: USB disconnect, address 3
usb 4-2: new high speed USB device using ehci_hcd and address 4
driverloader: NdisWriteErrorLogEntry: ErrorCode=UNSUPPORTED_CONFIGURATION NumberOfErrorValues=4
driverloader: NdisWriteErrorLogEntry: ErrorValue 0=0xd775f008
driverloader: NdisWriteErrorLogEntry: ErrorValue 1=0x00000001
driverloader: NdisWriteErrorLogEntry: ErrorValue 2=0x00000000
driverloader: NdisWriteErrorLogEntry: ErrorValue 3=0x00000000
wlan0: failed to initialize adapter (err = -5)
wlan0: Failed to register net device (-5)
driverloader: probe of 4-2:1.0 failed with error -5
usbcore: deregistering driver driverloader
driverloader: stack=8192/60/0 REGPARM
driverloader: a5agu.sys: 0xe194c000..0xe1991500 entry = e196f550 (pbase = 0x10000)
wlan0: New link status: Disconnected (0002)
wlan0: WPA, AES, TKIP, WEP128, WEP64 supported
wlan0: at 0000:00:10.32 (MAC address 00:11:95:F8:E1:6E) ready
usbcore: registered new driver driverloader
wlan0: New link status: Connected (0001)
wlan0: New link status: Disconnected (0002)
prism2_hostapd: unknown cmd=14
wlan0: New link status: Connected (0001)
wlan0: New link status: Disconnected (0002)
wlan0: New link status: Connected (0001)
wlan0: New link status: Disconnected (0002)
wlan0: New link status: Connected (0001)
wlan0: New link status: Disconnected (0002)
wlan0: no IPv6 routers present
a questo punto stacco fisicamente la scheda USB e la riattacco facendo fare il reload al driver, e i messaggi sono questi
/home/wifi/builds/200611092208/driverloader-2.35/packages/BUILD/driverloader-2.35/modules/osusb.c: UsbDataCompletionRoutine: error: URB status -71, surprise disconnect?
/home/wifi/builds/200611092208/driverloader-2.35/packages/BUILD/driverloader-2.35/modules/osusb.c: UsbDataCompletionRoutine: error: URB status -71, surprise disconnect?
/home/wifi/builds/200611092208/driverloader-2.35/packages/BUILD/driverloader-2.35/modules/osusb.c: UsbDataCompletionRoutine: error: URB status -71, surprise disconnect?
usb 4-2: USB disconnect, address 4
usbcore: deregistering driver driverloader
usb 4-2: new high speed USB device using ehci_hcd and address 5
driverloader: athfmwdl.sys: 0xe12ef000..0xe12f9980 entry = e12f65e0 (pbase = 0x10000)
driverloader: OsUsbClaimInterface: usb_driver_claim_interface returned -16
driverloader: OsUsbClaimInterface: usb_driver_claim_interface returned -16
usb 4-2: USB disconnect, address 5
usb 4-2: new high speed USB device using ehci_hcd and address 6
driverloader: stack=8192/60/0 REGPARM
driverloader: a5agu.sys: 0xe194c000..0xe1991500 entry = e196f550 (pbase = 0x10000)
wlan0: New link status: Disconnected (0002)
wlan0: WPA, AES, TKIP, WEP128, WEP64 supported
wlan0: at 0000:00:10.32 (MAC address 00:11:95:F8:E1:6E) ready
usbcore: registered new driver driverloader
wlan0: New link status: Connected (0001)
usbcore: deregistering driver driverloader
driverloader: stack=8192/60/0 REGPARM
driverloader: a5agu.sys: 0xe194c000..0xe1991500 entry = e196f550 (pbase = 0x10000)
wlan0: New link status: Disconnected (0002)
wlan0: WPA, AES, TKIP, WEP128, WEP64 supported
wlan0: at 0000:00:10.32 (MAC address 00:11:95:F8:E1:6E) ready
usbcore: registered new driver driverloader
wlan0: New link status: Connected (0001)
prism2_hostapd: unknown cmd=14
wlan0: New link status: Disconnected (0002)
wlan0: no IPv6 routers present
wlan0: New link status: Connected (0001)
come si vede alla fine resta connesso, ma non capisco dove sia il problema,
qualche idea?
:)
salve a tutti,
problema fastidioso con una suse 10.0
la connessione di rete va con una scheda rete wireless su USB, precisamente una D-link DWl G132 fornita da telecom, come il router modem Alice w-gate.
uso il modulo driverloader, però all'avvio la connessione non parte automaticamente, perché?
inutile dire che le ho provate tutte, e che in YAST ho settato la connessione come da avviare automaticamente all'avvio del sistema.
Cmq riesco a farla partire se stacco la cheda USB e la riattacco facendo fare un relod al modulo driverloader
posto qui dmesg:
all'avvio non riesce ad avviare la connessione, dmesg da' questo:
driverloader: no version for "struct_module" found: kernel tainted.
driverloader: module license 'see LICENSE file; Copyright (c)2003-2004 Linuxant inc.' taints kernel.
driverloader: stack=8192/60/0 REGPARM
driverloader: a5agu.sys: 0xe194c000..0xe1991500 entry = e196f550 (pbase = 0x10000)
bootsplash: status on console 0 changed to on
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[drm] Initialized drm 1.0.0 20040925
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized radeon 1.16.0 20050311 on minor 0:
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
driverloader: NdisWriteErrorLogEntry: ErrorCode=OUT_OF_RESOURCES NumberOfErrorValues=4
driverloader: NdisWriteErrorLogEntry: ErrorValue 0=0xdda59008
driverloader: NdisWriteErrorLogEntry: ErrorValue 1=0x00000028
driverloader: NdisWriteErrorLogEntry: ErrorValue 2=0xdba70008
driverloader: NdisWriteErrorLogEntry: ErrorValue 3=0xdba70008
e più avanti
driverloader: ndisQueryInformation: 802_3_CURRENT_ADDRESS st=RESOURCES W=0 N=0
wlan0: failed to read MAC address!
wlan0: Failed to register net device (-12)
driverloader: probe of 4-2:1.0 failed with error -12
usbcore: registered new driver driverloader
usb 4-2: USB disconnect, address 2
usb 4-2: new high speed USB device using ehci_hcd and address 3
driverloader: athfmwdl.sys: 0xe12ef000..0xe12f9980 entry = e12f65e0 (pbase = 0x10000)
driverloader: OsUsbClaimInterface: usb_driver_claim_interface returned -16
driverloader: OsUsbClaimInterface: usb_driver_claim_interface returned -16
usb 4-2: USB disconnect, address 3
usb 4-2: new high speed USB device using ehci_hcd and address 4
driverloader: NdisWriteErrorLogEntry: ErrorCode=UNSUPPORTED_CONFIGURATION NumberOfErrorValues=4
driverloader: NdisWriteErrorLogEntry: ErrorValue 0=0xd775f008
driverloader: NdisWriteErrorLogEntry: ErrorValue 1=0x00000001
driverloader: NdisWriteErrorLogEntry: ErrorValue 2=0x00000000
driverloader: NdisWriteErrorLogEntry: ErrorValue 3=0x00000000
wlan0: failed to initialize adapter (err = -5)
wlan0: Failed to register net device (-5)
driverloader: probe of 4-2:1.0 failed with error -5
usbcore: deregistering driver driverloader
driverloader: stack=8192/60/0 REGPARM
driverloader: a5agu.sys: 0xe194c000..0xe1991500 entry = e196f550 (pbase = 0x10000)
wlan0: New link status: Disconnected (0002)
wlan0: WPA, AES, TKIP, WEP128, WEP64 supported
wlan0: at 0000:00:10.32 (MAC address 00:11:95:F8:E1:6E) ready
usbcore: registered new driver driverloader
wlan0: New link status: Connected (0001)
wlan0: New link status: Disconnected (0002)
prism2_hostapd: unknown cmd=14
wlan0: New link status: Connected (0001)
wlan0: New link status: Disconnected (0002)
wlan0: New link status: Connected (0001)
wlan0: New link status: Disconnected (0002)
wlan0: New link status: Connected (0001)
wlan0: New link status: Disconnected (0002)
wlan0: no IPv6 routers present
a questo punto stacco fisicamente la scheda USB e la riattacco facendo fare il reload al driver, e i messaggi sono questi
/home/wifi/builds/200611092208/driverloader-2.35/packages/BUILD/driverloader-2.35/modules/osusb.c: UsbDataCompletionRoutine: error: URB status -71, surprise disconnect?
/home/wifi/builds/200611092208/driverloader-2.35/packages/BUILD/driverloader-2.35/modules/osusb.c: UsbDataCompletionRoutine: error: URB status -71, surprise disconnect?
/home/wifi/builds/200611092208/driverloader-2.35/packages/BUILD/driverloader-2.35/modules/osusb.c: UsbDataCompletionRoutine: error: URB status -71, surprise disconnect?
usb 4-2: USB disconnect, address 4
usbcore: deregistering driver driverloader
usb 4-2: new high speed USB device using ehci_hcd and address 5
driverloader: athfmwdl.sys: 0xe12ef000..0xe12f9980 entry = e12f65e0 (pbase = 0x10000)
driverloader: OsUsbClaimInterface: usb_driver_claim_interface returned -16
driverloader: OsUsbClaimInterface: usb_driver_claim_interface returned -16
usb 4-2: USB disconnect, address 5
usb 4-2: new high speed USB device using ehci_hcd and address 6
driverloader: stack=8192/60/0 REGPARM
driverloader: a5agu.sys: 0xe194c000..0xe1991500 entry = e196f550 (pbase = 0x10000)
wlan0: New link status: Disconnected (0002)
wlan0: WPA, AES, TKIP, WEP128, WEP64 supported
wlan0: at 0000:00:10.32 (MAC address 00:11:95:F8:E1:6E) ready
usbcore: registered new driver driverloader
wlan0: New link status: Connected (0001)
usbcore: deregistering driver driverloader
driverloader: stack=8192/60/0 REGPARM
driverloader: a5agu.sys: 0xe194c000..0xe1991500 entry = e196f550 (pbase = 0x10000)
wlan0: New link status: Disconnected (0002)
wlan0: WPA, AES, TKIP, WEP128, WEP64 supported
wlan0: at 0000:00:10.32 (MAC address 00:11:95:F8:E1:6E) ready
usbcore: registered new driver driverloader
wlan0: New link status: Connected (0001)
prism2_hostapd: unknown cmd=14
wlan0: New link status: Disconnected (0002)
wlan0: no IPv6 routers present
wlan0: New link status: Connected (0001)
come si vede alla fine resta connesso, ma non capisco dove sia il problema,
qualche idea?
:)