gabrihc
28-12-2006, 15:32
ciao,
ho appena installato questo masterizzatore Philips DVDR1648, e scaricato il firmware dal sito Philips.
Provo a masterizzare un'immagine, ma dice "scrittura fallita". Ecco il log:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programmi\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17.35.32
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
(Nero Express)
Recorder: <PHILIPS DVDR1648P1> Version: P2.4 - HA 1 TA 1 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <PHILIPS DVDR1648P1 >Version: P2.4 - HA 1 TA 1 - 6.6.0.13
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST320413A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVDR1648P1 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
PHILIPS DVDR1648P1 D: CDRom3
AXV CD/DVD-ROM E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 116MB (118872kB)
Memory in use : 77 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
28.12.2006
Scrivi Immagine DVD
16.16.41 #1 Text 0 File Reader.cpp, Line 127
Reader running
16.16.41 #2 Text 0 File Writer.cpp, Line 122
Writer PHILIPS DVDR1648P1 running
16.16.41 #3 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media
16.16.41 #4 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 1213222 (269:36.22, 2369MB)
16.16.41 #5 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
16.16.41 #6 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: PHILIPS DVDR1648P1, Media type: DVD-R
Disc Manufacturer: Prodis - cF01
Disc Application Code: 64, Disc Physical Code: 193
16.16.41 #7 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
16.16.41 #8 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Modalità 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 1213223 (1213223) = #1213223/269:36.23
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1213223 blocks [PHILIPS DVDR1648P1]
--------------------------------------------------------------
16.16.41 #9 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [PHILIPS DVDR1648P1] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2484680704, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1213223 | lead-out | 1 | 0x41 | 0x00
16.16.42 #10 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
16.16.42 #11 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.
16.16.42 #12 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
16.16.42 #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5.540 KB/s)
16.16.42 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
16.16.42 #15 Text 0 File DVDR.cpp, Line 2267
Recording mode: Sequential Recording Mode
16.16.42 #16 Text 0 File Mmc.cpp, Line 21469
Set BUFE: Buffer underrun protection -> ON
16.16.42 #17 Text 0 File DVDR.cpp, Line 2421
Start write address at LBA 0
DVD high compatibility mode: Yes
16.16.42 #18 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
16.19.34 #19 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0C5B0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x0C 0x00
16.19.34 #20 CDR -1135 File Writer.cpp, Line 311
Write error
16.19.34 #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
16.19.35 #22 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
16.19.35 #23 Text 0 File DVDR.cpp, Line 2658
EndDAO: Last written address was -1
16.19.35 #24 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5.540 KB/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=95360 bytes, created 03/08/2004 21.59.44 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
ho appena installato questo masterizzatore Philips DVDR1648, e scaricato il firmware dal sito Philips.
Provo a masterizzare un'immagine, ma dice "scrittura fallita". Ecco il log:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programmi\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17.35.32
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
(Nero Express)
Recorder: <PHILIPS DVDR1648P1> Version: P2.4 - HA 1 TA 1 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <PHILIPS DVDR1648P1 >Version: P2.4 - HA 1 TA 1 - 6.6.0.13
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST320413A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVDR1648P1 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
PHILIPS DVDR1648P1 D: CDRom3
AXV CD/DVD-ROM E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 116MB (118872kB)
Memory in use : 77 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
28.12.2006
Scrivi Immagine DVD
16.16.41 #1 Text 0 File Reader.cpp, Line 127
Reader running
16.16.41 #2 Text 0 File Writer.cpp, Line 122
Writer PHILIPS DVDR1648P1 running
16.16.41 #3 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media
16.16.41 #4 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 1213222 (269:36.22, 2369MB)
16.16.41 #5 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
16.16.41 #6 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: PHILIPS DVDR1648P1, Media type: DVD-R
Disc Manufacturer: Prodis - cF01
Disc Application Code: 64, Disc Physical Code: 193
16.16.41 #7 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
16.16.41 #8 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Modalità 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 1213223 (1213223) = #1213223/269:36.23
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1213223 blocks [PHILIPS DVDR1648P1]
--------------------------------------------------------------
16.16.41 #9 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [PHILIPS DVDR1648P1] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2484680704, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1213223 | lead-out | 1 | 0x41 | 0x00
16.16.42 #10 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
16.16.42 #11 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.
16.16.42 #12 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
16.16.42 #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5.540 KB/s)
16.16.42 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
16.16.42 #15 Text 0 File DVDR.cpp, Line 2267
Recording mode: Sequential Recording Mode
16.16.42 #16 Text 0 File Mmc.cpp, Line 21469
Set BUFE: Buffer underrun protection -> ON
16.16.42 #17 Text 0 File DVDR.cpp, Line 2421
Start write address at LBA 0
DVD high compatibility mode: Yes
16.16.42 #18 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
16.19.34 #19 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0C5B0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x0C 0x00
16.19.34 #20 CDR -1135 File Writer.cpp, Line 311
Write error
16.19.34 #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
16.19.35 #22 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
16.19.35 #23 Text 0 File DVDR.cpp, Line 2658
EndDAO: Last written address was -1
16.19.35 #24 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5.540 KB/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=95360 bytes, created 03/08/2004 21.59.44 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)