View Full Version : [TO Castellamonte] mobo sk 370 per P3 1000mhz
oldfield
24-11-2006, 14:53
Come titolo,cerco mobo sk 370,che supporti un P3 1000mhz.
Preferisco in zona,con consegna a mano.
oldfield
25-11-2006, 17:58
up
oldfield
26-11-2006, 09:26
Nessuno?
ti interessa questa:
http://www.pcchips.com.tw/PCCWeb/Products/ProdMBArchives.aspx?CategoryID=1&MenuID=109&LanID=0
modello:
M758LT V7.0
oldfield
26-11-2006, 13:00
ti interessa questa:
http://www.pcchips.com.tw/PCCWeb/Products/ProdMBArchives.aspx?CategoryID=1&MenuID=109&LanID=0
modello:
M758LT V7.0
Potrebbe ,ma non vedo se supporta un procio p3 1000mhz!
demonbl@ck
26-11-2006, 13:40
ciao, io ho una scheda madre su cui era montato un p3 933 Mhz che si ่ fritto
(c@zzo di ventola....si ่ bruciata) quindi credo che supporti un p3 1000,
se ti interessa guardo il modello e ti posto le specifiche (e il prezzo :D )
ciao
demonbl@ck
26-11-2006, 13:48
Dunque ่ una ECS P6BAP-A+ REV 2.2
ma non trovo il sito dela ECS :mc: per le specifiche e i drivers...
oldfield
26-11-2006, 15:14
Dunque ่ una ECS P6BAP-A+ REV 2.2
ma non trovo il sito dela ECS :mc: per le specifiche e i drivers...
No,grazie questa non supporta neanche un 600mhz!e poi il max di ram installabile e di 256mb.Troppo vecchia,ciao
demonbl@ck
26-11-2006, 15:54
?
ma se c'era installato un 933 ....
:mbe: :mbe:
Si lo supporta sicuramente questo ่ preso dal manuale:
This mainboard has a Socket-370 processor socket for Intel FCPGA Celeron, FCPGA Pentium III or Tualatin/Tualatin Celeron processors. You can install any one of these processors
on this mainboard.
This mainboard supports front-side bus speeds of 66MHz, 100MHz or 133MHz.
This mainboard has the GFXcel chipset which provides CPU Plug & Play through firmware, integrates a 128-bit AGP Graphics Accelerator and has an embedded 10BaseT/100BaseTX Network Interface. There is a full set of ATX I/O Ports including PS/2 keyboard and mouse ports, two USB ports, one parallel port, one serial port, one VGA port and one MIDI/game port. There is an onboard header USB1 making two extra USB ports by connecting the extended USB module to the mainboard.
This mainboard has all the features you need to develop a powerful multimedia workstation of network ready and built-in communications. This board is Micro-ATX size and has power connector for an ATX power supply.
Key Features
The key features of this mainboard include:
Socket-370 Processor Support
Supports FCPGA Celeron, FCPGA Pentium III and Tualatin/Tualatin Celeron CPUs
Supports 66MHz, 100MHz or 133MHz Front-Side Bus
All processors are automatically configured using firmware and a synchronous/asynchronous Host/DRAM Clock Scheme.
Note: 1. The Socket-370 on this mainboard doesnt support
PPGA Celeron CPU.
2. Please refer to Page 9 and 10 for more detailed
description about Tualatin/Tualatin Celeron CPU.
Memory Support
Two DIMM slots for 168-pin SDRAM memory modules
Support for 66MHz, 100MHz, & 133MHz memory bus
Maximum installed memory is 2 x 512MB = 1 GB
Expansion Slots
Three 32-bit PCI slots
---------------------------------------------------------
Install A CPU
This mainboard has a Socket 370 supporting FCPGA Celeron, FCPGA Pentium III and Tualatin/Tualatin Celeron processors.
Do not support PPGA Celeron processor.
To ensure reliability, ensure that your processor has a heatsink/cooling fan assembly.
Do not try to install a Socket 7 processor in the Socket-370. A Socket 7 processor such as the Pentium-MMX, or the AMD K5/K6 does not fit in the Socket 370. Do not try to install PPGA Celeron processor in Socket-370.
The following list notes the processors that are currently supported by this mainboard.
FCPGA Celeron: 300~966 MHz, FSB: 66 MHz
FCPGA Pentium III: 500~1130MHz, FSB: 100MHz, 133MHz
Tualatin/Tualatin Celeron: up to 1.4GHz
oldfield
26-11-2006, 19:14
Si lo supporta sicuramente questo ่ preso dal manuale:
This mainboard has a Socket-370 processor socket for Intel FCPGA Celeron, FCPGA Pentium III or Tualatin/Tualatin Celeron processors. You can install any one of these processors
on this mainboard.
This mainboard supports front-side bus speeds of 66MHz, 100MHz or 133MHz.
This mainboard has the GFXcel chipset which provides CPU Plug & Play through firmware, integrates a 128-bit AGP Graphics Accelerator and has an embedded 10BaseT/100BaseTX Network Interface. There is a full set of ATX I/O Ports including PS/2 keyboard and mouse ports, two USB ports, one parallel port, one serial port, one VGA port and one MIDI/game port. There is an onboard header USB1 making two extra USB ports by connecting the extended USB module to the mainboard.
This mainboard has all the features you need to develop a powerful multimedia workstation of network ready and built-in communications. This board is Micro-ATX size and has power connector for an ATX power supply.
Key Features
The key features of this mainboard include:
Socket-370 Processor Support
Supports FCPGA Celeron, FCPGA Pentium III and Tualatin/Tualatin Celeron CPUs
Supports 66MHz, 100MHz or 133MHz Front-Side Bus
All processors are automatically configured using firmware and a synchronous/asynchronous Host/DRAM Clock Scheme.
Note: 1. The Socket-370 on this mainboard doesnt support
PPGA Celeron CPU.
2. Please refer to Page 9 and 10 for more detailed
description about Tualatin/Tualatin Celeron CPU.
Memory Support
Two DIMM slots for 168-pin SDRAM memory modules
Support for 66MHz, 100MHz, & 133MHz memory bus
Maximum installed memory is 2 x 512MB = 1 GB
Expansion Slots
Three 32-bit PCI slots
---------------------------------------------------------
Install A CPU
This mainboard has a Socket 370 supporting FCPGA Celeron, FCPGA Pentium III and Tualatin/Tualatin Celeron processors.
Do not support PPGA Celeron processor.
To ensure reliability, ensure that your processor has a heatsink/cooling fan assembly.
Do not try to install a Socket 7 processor in the Socket-370. A Socket 7 processor such as the Pentium-MMX, or the AMD K5/K6 does not fit in the Socket 370. Do not try to install PPGA Celeron processor in Socket-370.
The following list notes the processors that are currently supported by this mainboard.
FCPGA Celeron: 300~966 MHz, FSB: 66 MHz
FCPGA Pentium III: 500~1130MHz, FSB: 100MHz, 133MHz
Tualatin/Tualatin Celeron: up to 1.4GHz
Mi dici cos'ha a corredo la mobo?cd,mascherina,manuale,ecc. e........chiaramente il prezzo spedita!
la scheda ha tutto tranne il cd originale
quindi cd di installazione, mascherina, connettori floppy immacolati, connettori ide immacolati...
te la posso dare a 30 SS incluse tieni presente che ho anche 2 banchi di ram pc133 da 256 samsung e se mi prendi tutto ti faccio 60 SS incluse
fammi sapere ciao
oldfield
27-11-2006, 07:38
la scheda ha tutto tranne il cd originale
quindi cd di installazione, mascherina, connettori floppy immacolati, connettori ide immacolati...
te la posso dare a 30 SS incluse tieni presente che ho anche 2 banchi di ram pc133 da 256 samsung e se mi prendi tutto ti faccio 60 SS incluse
fammi sapere ciao
Di ram ne ho un fracco,m'interessa solo la mobo;ancora una limatina e la prendo.
p.s.- st๒ contrattando con altro utente,col primo che lima,si conclude.
oldfield
27-11-2006, 14:30
hai pvt
Grazie a tutti,ma l'ho trovata sotto casa!!!chiuso.
vBulletin® v3.6.4, Copyright ©2000-2025, Jelsoft Enterprises Ltd.