Aggiornare BIOS QDI Advance 9 [Archivio]

Ximios

23-11-2006, 12:21

Ciao, vorrei aggiornare il bios della sk madre su cui è installato windows XP.
Vi scrivo la guida ma alcuni passaggi non mi sono chiari:

Advance 9 BIOS V1.9SLC release note.

This disk contains three files:A9_V19.bin,README.TXT,AWDFLASH.EXE

1.The checksum of BIOS File: A9_V19.bin is 9F13(Hex) ;

2. How to use AWDFLASH.EXE utility:
This is a flash memory write/read utility.
IMPORTANT NOTE:
The AWDFLASH utility could not correctly run in windows (virtual 8086)
MS-DOS mode. It must be proceeded with the following steps:
1.Create a bootable system floppy diskette by typing "FORMAT A:/S"
from the dos prompt under DOS6.XX or WINDOWS9X environment.
2.Boot system with diskette.
3.Then run the AWDFLASH utility.

Usage: AWDFLASH [FileName1] [FileName2] [/<sw>[/<sw>...]]
FileName1 : New BIOS Name For Flash Programming
FileName2 : BIOS File For Backing-up the Original BIOS
<Swtches>
?: Show Help Messages
py: Program Flash Memory pn: No Flash Programming
sy: Backup Original BIOS To Disk File sn: No Original BIOS Backup
Sb: Skip BootBlock programming sd: Save DMI data to file
cp: Clear PnP(ESCD) Data After Programming
cd: Clear DMI Data After Programming
cc: Clear CMOS Data After Programming
R: RESET System After Programming
Tiny: Occupy lesser memory
E: Return to DOS When Programming is done
F: Use Flash Routines in Original BIOS For Flash Programming
LD: Destroy CMOS Checksum And No System Halt For First Reboot
After Programming

Example: AWDFLASH 2a59i000.bin /py/sn/cd/cp

Warning:
Avoid power-off incidently in upgrading procedure, or system would fail
to reboot!

Non so come far partire windows xp da dos e dove devo mettere il file AWDFLASH.EXE per eseguirlo..su un floppy forse?!?

Vi chiedo un aiuto..
grazie a tutti!

black92

23-11-2006, 12:30

Ciao, vorrei aggiornare il bios della sk madre su cui è installato windows XP.
Vi scrivo la guida ma alcuni passaggi non mi sono chiari:

Advance 9 BIOS V1.9SLC release note.

This disk contains three files:A9_V19.bin,README.TXT,AWDFLASH.EXE

1.The checksum of BIOS File: A9_V19.bin is 9F13(Hex) ;

2. How to use AWDFLASH.EXE utility:
This is a flash memory write/read utility.
IMPORTANT NOTE:
The AWDFLASH utility could not correctly run in windows (virtual 8086)
MS-DOS mode. It must be proceeded with the following steps:
1.Create a bootable system floppy diskette by typing "FORMAT A:/S"
from the dos prompt under DOS6.XX or WINDOWS9X environment.
2.Boot system with diskette.
3.Then run the AWDFLASH utility.

Usage: AWDFLASH [FileName1] [FileName2] [/<sw>[/<sw>...]]
FileName1 : New BIOS Name For Flash Programming
FileName2 : BIOS File For Backing-up the Original BIOS
<Swtches>
?: Show Help Messages
py: Program Flash Memory pn: No Flash Programming
sy: Backup Original BIOS To Disk File sn: No Original BIOS Backup
Sb: Skip BootBlock programming sd: Save DMI data to file
cp: Clear PnP(ESCD) Data After Programming
cd: Clear DMI Data After Programming
cc: Clear CMOS Data After Programming
R: RESET System After Programming
Tiny: Occupy lesser memory
E: Return to DOS When Programming is done
F: Use Flash Routines in Original BIOS For Flash Programming
LD: Destroy CMOS Checksum And No System Halt For First Reboot
After Programming

Example: AWDFLASH 2a59i000.bin /py/sn/cd/cp

Warning:
Avoid power-off incidently in upgrading procedure, or system would fail
to reboot!

Non so come far partire windows xp da dos e dove devo mettere il file AWDFLASH.EXE per eseguirlo..su un floppy forse?!?

Vi chiedo un aiuto..
grazie a tutti!

si..allora inserisci un floppy nel lettore, lo formatti dicendo crea disco di avvio ms-dos poi copi l'exe-in questo caso awdflash.exe- e i file di aggiornamento del bios, riavvii e fai partire il boot dal floppy, poi digiti AWDFLASH.EXE e successivamente dai il percorso del file di aggiornamento ;)

tutmosi3

23-11-2006, 13:03

Ciao, vorrei aggiornare il bios della sk madre su cui è installato windows XP.
Vi scrivo la guida ma alcuni passaggi non mi sono chiari:

Advance 9 BIOS V1.9SLC release note.

This disk contains three files:A9_V19.bin,README.TXT,AWDFLASH.EXE

1.The checksum of BIOS File: A9_V19.bin is 9F13(Hex) ;

2. How to use AWDFLASH.EXE utility:
This is a flash memory write/read utility.
IMPORTANT NOTE:
The AWDFLASH utility could not correctly run in windows (virtual 8086)
MS-DOS mode. It must be proceeded with the following steps:
1.Create a bootable system floppy diskette by typing "FORMAT A:/S"
from the dos prompt under DOS6.XX or WINDOWS9X environment.
2.Boot system with diskette.
3.Then run the AWDFLASH utility.

Usage: AWDFLASH [FileName1] [FileName2] [/<sw>[/<sw>...]]
FileName1 : New BIOS Name For Flash Programming
FileName2 : BIOS File For Backing-up the Original BIOS
<Swtches>
?: Show Help Messages
py: Program Flash Memory pn: No Flash Programming
sy: Backup Original BIOS To Disk File sn: No Original BIOS Backup
Sb: Skip BootBlock programming sd: Save DMI data to file
cp: Clear PnP(ESCD) Data After Programming
cd: Clear DMI Data After Programming
cc: Clear CMOS Data After Programming
R: RESET System After Programming
Tiny: Occupy lesser memory
E: Return to DOS When Programming is done
F: Use Flash Routines in Original BIOS For Flash Programming
LD: Destroy CMOS Checksum And No System Halt For First Reboot
After Programming

Example: AWDFLASH 2a59i000.bin /py/sn/cd/cp

Warning:
Avoid power-off incidently in upgrading procedure, or system would fail
to reboot!

Non so come far partire windows xp da dos e dove devo mettere il file AWDFLASH.EXE per eseguirlo..su un floppy forse?!?

Vi chiedo un aiuto..
grazie a tutti!

Devi aggiornare il BIOS per qualche motivo particolare o solo perchè ti va di farlo?
Ciao

black92

23-11-2006, 13:22

Devi aggiornare il BIOS per qualche motivo particolare o solo perchè ti va di farlo?
Ciao

appunto...

Ximios

23-11-2006, 13:26

..è pericoloso?!?! Ho visto che la scheda madre non vede le dimm superiori a 128mb per banco in più non vede gli hard disk da 80gb!

tutmosi3

23-11-2006, 14:20

..è pericoloso?!?!
...

Abbastanza ...
Basta un difetto di comunicazione, il floppy che non va benissimo, uno sbalzo di corrente (quando si fanno queste operazioni si deve stare assolutamente sotto ad un UPS) e metti KO la scheda madre.
Ciao

eis84

29-12-2011, 18:13

Ciao, vorrei aggiornare il bios della sk madre su cui è installato windows XP.
Vi scrivo la guida ma alcuni passaggi non mi sono chiari:

Advance 9 BIOS V1.9SLC release note.

This disk contains three files:A9_V19.bin,README.TXT,AWDFLASH.EXE

1.The checksum of BIOS File: A9_V19.bin is 9F13(Hex) ;

2. How to use AWDFLASH.EXE utility:
This is a flash memory write/read utility.
IMPORTANT NOTE:
The AWDFLASH utility could not correctly run in windows (virtual 8086)
MS-DOS mode. It must be proceeded with the following steps:
1.Create a bootable system floppy diskette by typing "FORMAT A:/S"
from the dos prompt under DOS6.XX or WINDOWS9X environment.
2.Boot system with diskette.
3.Then run the AWDFLASH utility.

Usage: AWDFLASH [FileName1] [FileName2] [/<sw>[/<sw>...]]
FileName1 : New BIOS Name For Flash Programming
FileName2 : BIOS File For Backing-up the Original BIOS
<Swtches>
?: Show Help Messages
py: Program Flash Memory pn: No Flash Programming
sy: Backup Original BIOS To Disk File sn: No Original BIOS Backup
Sb: Skip BootBlock programming sd: Save DMI data to file
cp: Clear PnP(ESCD) Data After Programming
cd: Clear DMI Data After Programming
cc: Clear CMOS Data After Programming
R: RESET System After Programming
Tiny: Occupy lesser memory
E: Return to DOS When Programming is done
F: Use Flash Routines in Original BIOS For Flash Programming
LD: Destroy CMOS Checksum And No System Halt For First Reboot
After Programming

Example: AWDFLASH 2a59i000.bin /py/sn/cd/cp

Warning:
Avoid power-off incidently in upgrading procedure, or system would fail
to reboot!

Non so come far partire windows xp da dos e dove devo mettere il file AWDFLASH.EXE per eseguirlo..su un floppy forse?!?

Vi chiedo un aiuto..
grazie a tutti!
Ciao,
anch'io ho una vecchio PC con advance 9 e ho rimediato un PIII a 1400Mhz, solo che per montarlo sulla scheda dovrei aggiornare il BIOS. (da quanto ho capito dai vari forum).
Non vedendo più il sito della QDI non so da dove scarivcarlo.
Ti vorrei chiedere se ne hai in giro ancora una copia.