View Full Version : installato i driver ati ma ora non parte piu' X
^[H3ad-Tr1p]^
20-11-2006, 13:52
salve a tutti
ho installato i driver ati sulla mia slackware e sembrava andato tutto a buon fine
ho poi aggiunto questa riga a fstab
tmpfs /dev/shm tmpfs defaults 0 0
ed in /etc/X11/xorg.conf ho decommentato le seguenti righe
Section "DRI"
Mode 0666
EndSection
e poi:
#This load the GLX modules
load 'glx'
#This load the DRI modules
load 'DRI'
si presentano proprio cosi' come le ho scritte
ora pero' mi si blocca a questo punto e non parte piu':
Starting up X11 session manager...
posso accedere alla consol con ctrl+alt+F6 pero' non so cosa andare a sistemare....che mi dite di controllare?
Può essere perché le schede ATI non supportano ancora "Composite" e quindi devi aggiungere
Section "Extensions"
Option "Composite" "0"
EndSection
Provare non ti costa nulla. Ciao. :cool:
^[H3ad-Tr1p]^
20-11-2006, 14:37
grazie
pero' ho visto adesso che i driver ati sono per xorg 6.8 io invece ho xorg 7 su slackware
non e' che potrebbe essere quello?
oltretutto nel kernel ho disabilitato AGP e DRM ma in un altra guida ho letto che i moduli che van caricato insieme a fglrx devono essere
fglrx
ati_agp
agpgart
quindi adesso ricompilo
tu che mi dici?
monossido
20-11-2006, 15:03
in /var/log/Xorg.0.log vedi gli errori
^[H3ad-Tr1p]^
20-11-2006, 15:19
in /var/log/Xorg.0.log vedi gli errori
si ,che e' anche quello che mi da quando faccio startx
(EE) no drivers available
no screens found
in xorg.conf ho provato a commentare e decommentare la riga
BusID 'PCI:0:10:0'
non so,mi dice che il driver non c'e'
se faccio styartx invece mio dice:
atiddXsetup X version mismatch - detected X.org 7.0.0.0,required X.org 6.8.0.0
faqiled to load module "fglrx" (module requirement mismatch,0)
no driver available
fatal server error
no screens found
XIO: fatal error 104 (Connection reset by peer) on X server
after 0 request (0 known processed) with 0 event remainig
non vorrei aver svbagliato versione driver
slackware monta xorg 7 mentre questi driver sono per la 6.8
io pensavo che potessero andar bene comunque...poi magari non e' quello
come faccio pero' per rimettere tutto a posto come prima in modo che almeno parta?per l accelerazione grafica se questi driver non vanno bene mi tocchera' aspettare
In genere quando installi nuovi driver video tutte le distribuzioni dovrebbero creare una copia del xorg.conf originale (tipo xorg.conf.original oppure xorg.conf.0). Da linea di comando naviga fino a X11 e, dopo esserti accertato che esista, elimina il nuovo xorg.conf e rinomina "xorg.conf.quello che è" in xorg.conf
Ciao :cool:
^[H3ad-Tr1p]^
21-11-2006, 13:17
In genere quando installi nuovi driver video tutte le distribuzioni dovrebbero creare una copia del xorg.conf originale (tipo xorg.conf.original oppure xorg.conf.0). Da linea di comando naviga fino a X11 e, dopo esserti accertato che esista, elimina il nuovo xorg.conf e rinomina "xorg.conf.quello che è" in xorg.conf
Ciao :cool:
non avevo il backup ma solo le xorg.conf-vesa
comunque ho risolto riconfigurando X con xorgconfig
ora pero' il problema sussiste,non ho i driver per l accelerazione grafica proprietari,ho solo i mesa
se i driver proprietari sono indietro rispetto ad xorg mi conviene aspettare o posso provare a mettere quelli open source?
quelli ATI originali li scarico di qui http://www.ati.com/support/driver.html
ma tenete presente che la mia scheda e' versione mobile,lo facccio presente perche' a volte qualcosa cambia
i driver open source li scaricherei di qui http://www.schneider-digital.de solo che ci sono solo quelli per le FIRE GL ed io ho una mobility radeon 9700 128Mb
che driver posso mettere?
mi pare che quelli che ho provato ad installare fossero quelli per Xorg 6.8 ma io ho il 7.0.0.0
questi driver andavano bene su slackware 10.2 su questo non so cosa mettere
fra l altro: nei moduli del kernel ho installato solo come moduli:
CONFIG_AGP
CONFIG_AGP_ATI
devo attivare altro?
^[H3ad-Tr1p]^
21-11-2006, 13:42
ho provato anche con i .run che non riesco a far funzionare lostesso,solo che adesso nel database dei pacchetti non e' presente per cui come li levo tutti i file di installazione?
zephyr83
21-11-2006, 13:55
installando i driver dal sito ati nn dovresti avere problemi, però una votla installati devi eseguire
aticonfig --initial
inoltre fglrx deve essere caricato come modulo all'avvio
^[H3ad-Tr1p]^
21-11-2006, 14:04
installando i driver dal sito ati nn dovresti avere problemi, però una votla installati devi eseguire
aticonfig --initial
inoltre fglrx deve essere caricato come modulo all'avvio
quali mi consigli? i run o quelli normali?
io preferirei installare a mano pero' li ho provati tutti e due e i run sembrano funzare meglio
il problema e' che se poi li dovessi togliere come faccio che nel database dei pacchetti non e' presente?
monossido
21-11-2006, 14:06
se il file .run nn crea il modulo fglrx vuol dire che ti manca qlc!!gli header del kernel per esempio...
quando installi i driver ci deve essere un fie .log nn ricordo bene dove...te lo dice anke il tool gui dei driver
^[H3ad-Tr1p]^
21-11-2006, 14:11
se il file .run nn crea il modulo fglrx vuol dire che ti manca qlc!!gli header del kernel per esempio...
quando installi i driver ci deve essere un fie .log nn ricordo bene dove...te lo dice anke il tool gui dei driver
no no,il modulo fglrx me lo crea correttamente e me lo carica anche
^[H3ad-Tr1p]^
21-11-2006, 14:29
bo',guarda....adesso i driver li ho installati
xorg.conf configurato correttamente...almeno credo,se vuoi te lo posto cosi' ci dai un occhiata ma mi sembra corretto
mi carica fglrx all avvio
non e' che pero' mio manca un modulo nel kernel?
con lsmod mi dice che ho caricato fglrx e agpgart...cosa manca?
chiedo cio' perche' quando vado a fare fglrxinfo mi dice che funzano i mesa
zephyr83
21-11-2006, 15:18
^']bo',guarda....adesso i driver li ho installati
xorg.conf configurato correttamente...almeno credo,se vuoi te lo posto cosi' ci dai un occhiata ma mi sembra corretto
mi carica fglrx all avvio
non e' che pero' mio manca un modulo nel kernel?
con lsmod mi dice che ho caricato fglrx e agpgart...cosa manca?
chiedo cio' perche' quando vado a fare fglrxinfo mi dice che funzano i mesa
Se hai installato i driver ati dal "file" run e il modulo fglrx viene caricato dovrebbe essere tutto a posto. Hai eseguito aticonfig? prov a postare il tuo xorg.conf. Cmq per esperienza personale so che i driver ati sn molti bastardi! Su altre distro tipo simplymepis li impostavo all'inizio, poi provavo a smanettarci un po' e se abilitavo tipo i driver radeon dopo nn riuscivo più a riabilitare il 3D, anche se come driver usavo fglrx.
^[H3ad-Tr1p]^
21-11-2006, 15:40
Se hai installato i driver ati dal "file" run e il modulo fglrx viene caricato dovrebbe essere tutto a posto. Hai eseguito aticonfig? prov a postare il tuo xorg.conf. Cmq per esperienza personale so che i driver ati sn molti bastardi! Su altre distro tipo simplymepis li impostavo all'inizio, poi provavo a smanettarci un po' e se abilitavo tipo i driver radeon dopo nn riuscivo più a riabilitare il 3D, anche se come driver usavo fglrx.
che siano bastardi fin li....credo che lo facciano apposta a sto punto perche' non e' possibile bestemmiare tanto cosi' per installare una cosa che dovrebbe essere una cazzata
dunque,l xorg adesso come adesso non te lo posso piu' postare perche' ho disinstallato tutto per l ennesima volta ed ora mi stacco che devo andar a far la spesa,appena mi riattacco te lo posto
riguardo all installazione ho provato sia con i run che installare a mano e sembra chje il risultato sia il medesimo...vale a dire che il kernel me lo patcha e l xorg.conf me lo configura,il modulo fglrx me lo carica come agpgart e sembrano funzionare
riguardo la configurazuione ho dato aticonfig --initial --input=/etx/X11/xorg.conf
anche senza input ma sembra configurare correttamente il xorg che manteneva anche le iumpostazioni del mio vecchio xorg che avevo sottoforma di backup ( xorg.conf.original-0 )
dando fglrxinfo pero' mi dava che usava i mesa
dando glxgears si apriiva il pannellino con le rotelle che girano e mi dava dei valori intorno ai 450fps x 5 sec (+ o - mi pare)
riguardo allo schermo,sembrava che qualcosa fosse cambiato perche' mi dava per esempio la consolle con i caratteri piu' grandi anche se le impostazioni erano le medesime
a sto punto non so piu' come impostarlo
tu quali moduli relativi al chipset agp ecc ecc relativi al funzionamento della scheda video hai compilato?
magari mi manca qualcosa pero' sembra tutto a posto e non capisco perche' mi dica che usa i mesa
monossido
21-11-2006, 20:54
il perchè usa i driver mesa te lo deve dire nei log di xorg!!...ci deve essere lì qualche errore...leggi bene!
^[H3ad-Tr1p]^
24-11-2006, 17:01
il perchè usa i driver mesa te lo deve dire nei log di xorg!!...ci deve essere lì qualche errore...leggi bene!
si in effetti c'e'...ho trovato qualcosa...ti posto un pezzetto del mio xorg.conf perche' c'e' un punto dove mi ripete la section device 2 volte e volevo sapere se anche a casa degli altri e' uguale
poi ti posto un pezzo del Xorg.0.conf perche' credo di aver trovato l'errore
e poi ti posto il lspci e relativa parte di config cosi' se ci puoi dare un'occhiata magari mi sai dare una dritta su che modulo installare nel kernel perche' credo che manchi qualcosa li'
dunque:
il pezzo di xorg.conf che non mi convince in quanto riporta 2 sezioni "section device"
Section "Device"
#VideoRam 131072
# Insert Clocks lines here if appropriate
Identifier "ATI Mobility Radeon 9700 128Mb"
Driver "fglrx"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection
io qui nel primo ho sostituito 'radeon' con 'fglrx' pero' non so se sono anche da decommentare le voci relative alla memoria ed al nome della scheda
qui il pezzo di Xorg.0.log che mi fa credere di aver trovato l'errore
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0x2000
(II) fglrx(0): [drm] mapped SAREA 0x2000 to 0xb7d50000
(II) fglrx(0): [drm] framebuffer handle = 0x3000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.29.6
(II) fglrx(0): Date: Sep 19 2006
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.17.13-STORM
(II) fglrx(0): Build-Kernel MODVERSIONS: no
(II) fglrx(0): Build-Kernel __SMP__: yes
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [drm] register handle = 0x00004000
(EE) fglrx(0): [agp] unable to acquire AGP, error "xf86_ENODEV"
(EE) fglrx(0): cannot init AGP
(II) fglrx(0): [drm] removed 1 reserved context for kernel
(II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0x2000 at 0xb7d50000
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xd8000000 FBMappedSize: 0x08000000
(II) fglrx(0): FBMM initialized for area (0,0)-(1408,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1408,1050) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(**) fglrx(0): DPMS enabled
(WW) fglrx(0): Option "VendorName" is not used
(WW) fglrx(0): Option "ModelName" is not used
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
qui un lspci che posto per intero
00:00.0 Host bridge: VIA Technologies, Inc. VT8385 [K8T800 AGP] Host Bridge (rev 01)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South]
00:07.0 CardBus bridge: Texas Instruments PCI4510 PC card Cardbus Controller (rev 02)
00:07.1 FireWire (IEEE 1394): Texas Instruments PCI4510 IEEE-1394 Controller
00:09.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
00:0b.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 80)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]
qui i moduli relativi al mio chipset compilati nel kernel che dicevo prima ma che non so se sono giusti e non so se manca qualcosa e qualcos altro posso toglierlo e fra l altro non so se,siccome e' un notebook con AMD64 devo abilitare solo le voci relative all amd64_agp ,anche insieme alle altre oppure e' proprio un altro chipset che non centra nulla
root@xxx:# cat /boot/config | grep VIA
# CONFIG_MVIAC3_2 is not set
# CONFIG_VIA_FIR is not set
# CONFIG_AGP_VIA is not set
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
# CONFIG_SENSORS_VIA686A is not set
CONFIG_SND_VIA82XX=m
# CONFIG_SND_VIA82XX_MODEM is not set
root@xxx:# cat /boot/config | grep AGP
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
CONFIG_AGP_ATI=m
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
tnx
zephyr83
24-11-2006, 17:22
nessun problema in xorg.conf, il pirmo device è quello configurato prima dell'installazinoe dei driver ati.....puoi mettere tutte le configurazioni che vuoi tanto poi in Serverlayout si imposta solo quella principale. Il tuo xorg.conf è a posto.
Posta anche lsmod
zephyr83
24-11-2006, 17:29
ah una cosa, i driver che hai preso dal sito ati sn quelli per la tua mobility 9600 vero?
monossido
24-11-2006, 21:57
credo ti manca l'agp del tuo chipset cioè via_agp
quindi sudo modprobe via_agp
riavvii il server grafico
se funziona metti via_agp in /etc/modules (mettilo come primo...o cmq prima di fglrx) così lo carica automaticamente all riavvio :)
EDIT controlla di avere anke agpgart ovviamente :D
^[H3ad-Tr1p]^
28-11-2006, 18:53
nessun problema in xorg.conf, il pirmo device è quello configurato prima dell'installazinoe dei driver ati.....puoi mettere tutte le configurazioni che vuoi tanto poi in Serverlayout si imposta solo quella principale. Il tuo xorg.conf è a posto.
Posta anche lsmod
oki perfetto,cosi' so che' xorg.conf va bene
qui lsmod
headtrip@xxx:~$ lsmod
Module Size Used by
fglrx 388268 0
snd_pcm_oss 34080 0
snd_mixer_oss 14208 1 snd_pcm_oss
pcmcia 28076 0
firmware_class 7296 1 pcmcia
pcmcia_core 31632 1 pcmcia
sg 24860 0
sd_mod 13328 0
vfat 9472 0
fat 40220 1 vfat
ntfs 185492 1
ide_scsi 12036 0
agpgart 25520 1 fglrx
usb_storage 29828 0
scsi_mod 74504 4 sg,sd_mod,ide_scsi,usb_storage
usbhid 32736 0
snd_via82xx 20372 1
snd_ac97_codec 79264 1 snd_via82xx
snd_ac97_bus 1920 1 snd_ac97_codec
snd_pcm 67976 4 snd_pcm_oss,snd_via82xx,snd_ac97_codec
ohci1394 27568 0
snd_timer 18180 1 snd_pcm
snd_page_alloc 7176 2 snd_via82xx,snd_pcm
snd_mpu401_uart 5632 1 snd_via82xx
snd_rawmidi 17696 1 snd_mpu401_uart
ehci_hcd 24328 0
uhci_hcd 18316 0
snd_seq_device 5900 1 snd_rawmidi
ieee1394 76596 1 ohci1394
tg3 89988 0
usbcore 99712 5 usb_storage,usbhid,ehci_hcd,uhci_hcd
i2c_viapro 6804 0
snd 40292 10 snd_pcm_oss,snd_mixer_oss,snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
i2c_core 15248 1 i2c_viapro
soundcore 7008 1 snd
^[H3ad-Tr1p]^
28-11-2006, 18:55
ah una cosa, i driver che hai preso dal sito ati sn quelli per la tua mobility 9600 vero?
ho preso quelli per la 9700 in quanto la mia e' una 9700 ma che poi e' lo stesso in quanto la 9700 e' una 9600 modificata
infatti il chip ti da 9600
il driver dovrebbe essere lo stesso
^[H3ad-Tr1p]^
28-11-2006, 18:58
credo ti manca l'agp del tuo chipset cioè via_agp
quindi sudo modprobe via_agp
riavvii il server grafico
se funziona metti via_agp in /etc/modules (mettilo come primo...o cmq prima di fglrx) così lo carica automaticamente all riavvio :)
EDIT controlla di avere anke agpgart ovviamente :D
grazie mille per le info
adesso ricompilo poi domani vedo di far funzionare il tutto e ti faccio sapere,magari ti posto il risultato
posto magari anche un lsmod cosi' ti faccio vedere ... magari se c'e' qualcosa in piu' lo levo,non vorrei caricare moduli che non servono
mi ci son messo dietro adesso perche' in questi giorni ho avuto un po' da fare :rolleyes:
zephyr83
28-11-2006, 20:18
^']ho preso quelli per la 9700 in quanto la mia e' una 9700 ma che poi e' lo stesso in quanto la 9700 e' una 9600 modificata
infatti il chip ti da 9600
il driver dovrebbe essere lo stesso
ah credevo avessiuna 9600 visto che il sistema la riconsce come tale
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]
ma forse quell'M10 sta a indicare apppunto la 9700
^[H3ad-Tr1p]^
29-11-2006, 17:27
mi sa che ho ancora un problema e non mi funziona ancora :rolleyes:
ti faccio vedere che magari ci capisci qualcosa in piu'
lsmod
Module Size Used by
fglrx 388268 0
snd_pcm_oss 34080 0
snd_mixer_oss 14208 1 snd_pcm_oss
pcmcia 28076 0
firmware_class 7296 1 pcmcia
pcmcia_core 31632 1 pcmcia
vfat 9472 0
fat 40220 1 vfat
ntfs 185492 1
sg 24860 0
sd_mod 13328 0
ide_scsi 12036 0
agpgart 25520 1 fglrx
usb_storage 29828 0
scsi_mod 74504 4 sg,sd_mod,ide_scsi,usb_storage
usbhid 32736 0
snd_via82xx 20372 1
snd_ac97_codec 79264 1 snd_via82xx
snd_ac97_bus 1920 1 snd_ac97_codec
snd_pcm 67976 4 snd_pcm_oss,snd_via82xx,snd_ac97_codec
snd_timer 18180 1 snd_pcm
snd_page_alloc 7176 2 snd_via82xx,snd_pcm
snd_mpu401_uart 5632 1 snd_via82xx
ohci1394 27568 0
snd_rawmidi 17696 1 snd_mpu401_uart
snd_seq_device 5900 1 snd_rawmidi
ehci_hcd 24328 0
uhci_hcd 18316 0
ieee1394 76596 1 ohci1394
snd 40292 10 snd_pcm_oss,snd_mixer_oss,snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
usbcore 99712 5 usb_storage,usbhid,ehci_hcd,uhci_hcd
tg3 89988 0
i2c_viapro 6804 0
i2c_core 15248 1 i2c_viapro
soundcore 7008 1 snd
avrei pero' qui da farti vedere una cosa del config che magari e' quello
headtrip@xxx:~$ cat /boot/config | grep AGP
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=m
headtrip@xxx:~$ cat /boot/config | grep VIA
# CONFIG_MVIAC3_2 is not set
# CONFIG_VIA_FIR is not set
CONFIG_AGP_VIA=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
# CONFIG_SENSORS_VIA686A is not set
CONFIG_SND_VIA82XX=m
# CONFIG_SND_VIA82XX_MODEM is not set
alcuni di questi moduli non vengono caricati mi pare...non e' che li devo installare staticamente?
i moduli fglrx non me li carica all avvio e non capisco come mai
il server X non partiva anche coi moduli caricati dicendomi "not sreens found " fino a quando non ho fatto una modifica,alche' e' partito ma fglrxinfo mi dice che usa i driver mesa
qui sotto ti posto xorg.conf
^[H3ad-Tr1p]^
29-11-2006, 17:27
# File generated by xorgconfig.
#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#
# **********************************************************************
# Refer to the xorg.conf(5x) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
# **********************************************************************
# Server flags section.
# **********************************************************************
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
# Device configured by xorgconfig:
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "DRI"
Mode 0666
EndSection
Section "ServerLayout"
# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
Identifier "Simple Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic/"
EndSection
Section "Module"
# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the font modules
# This loads the GLX module
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "type1"
# Load "speedo"
Load "freetype"
# Load "xtt"
Load "glx"
# This loads the DRI module
Load "dri"
EndSection
Section "InputDevice"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"
EndSection
Section "InputDevice"
# Identifier and driver
# the following line.
# Option "Protocol" "Xqueue"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2" # PS/2 Mouse
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
Option "Device" "/dev/mouse"
# When using XQUEUE, comment out the above two lines, and uncomment
EndSection
Section "Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
Identifier "LCD"
HorizSync 31.5 - 64.3
VertRefresh 50.0 - 90.0
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
Identifier "Standard VGA"
Driver "vga"
VendorName "Unknown"
BoardName "Unknown"
EndSection
Section "Device"
#VideoRam 131072
# Insert Clocks lines here if appropriate
Identifier "ATI Mobility Radeon 9700 128Mb"
Driver "radeon"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "ATI Mobility Radeon 9700 128Mb"
Monitor "LCD"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1400x1050" "1280x1024" "1024x768" "800x600"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
^[H3ad-Tr1p]^
29-11-2006, 17:30
la modifica e' questa che ti posto:
qui quella originale ottenuta con aticonfig --initial --input=/etc/X11/xorg.conf
Section "Device"
Identifier "Screen 1"
Driver "fglrx"
EndSection
qui la mia modifica
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection
^[H3ad-Tr1p]^
29-11-2006, 17:32
qui ti posto il mio l'ultima parte di Xorg.0.log dopo la modifica che ho apportato
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card252
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card253
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card254
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
(II) RADEON(0): [drm] drmOpen failed
(EE) RADEON(0): [dri] DRIScreenInit failed. Disabling DRI.
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Memory manager initialized to (0,0) (1408,8191)
(II) RADEON(0): Reserved area from (0,1050) to (1408,1052)
(II) RADEON(0): Largest offscreen area available: 1408 x 7139
(II) RADEON(0): Render acceleration unsupported on Radeon 9500/9700 and newer.
(II) RADEON(0): Render acceleration disabled
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(==) RADEON(0): Backing store disabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor (scanline 1052)
(II) RADEON(0): Largest offscreen area available: 1408 x 7136
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/X11R6/lib/modules/multimedia/theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(WW) RADEON(0): Direct rendering disabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "IMPS/2"
(**) Mouse1: Device: "/dev/mouse"
(**) Mouse1: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/mouse"
(**) Option "Emulate3Buttons" "no"
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 9
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard1: XkbModel: "pc105"
(**) Option "XkbLayout" "it"
(**) Keyboard1: XkbLayout: "it"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
Could not init font path element /usr/X11R6/lib/X11/fonts/CID/, removing from list!
zephyr83
29-11-2006, 17:39
st driver ati sn una danno, soprattutto per le schede mobility. purtroppo io nn so esserti di aiuto
zephyr83
29-11-2006, 17:46
ora che ci penso, nn vedo il modulo per l'agp, prova a dare modprobe via-agp
^[H3ad-Tr1p]^
06-12-2006, 16:11
headtrip@DiesIrae:~$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: MOBILITY RADEON 9700 Generic
OpenGL version string: 2.0.6065 (8.29.6)
headtrip@DiesIrae:~$ glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
headtrip@DiesIrae:~$ glxgears
4944 frames in 5.0 seconds = 988.711 FPS
4989 frames in 5.0 seconds = 997.752 FPS
4989 frames in 5.0 seconds = 997.753 FPS
4989 frames in 5.0 seconds = 997.752 FPS
4989 frames in 5.0 seconds = 997.752 FPS
4989 frames in 5.0 seconds = 997.752 FPS
4975 frames in 5.0 seconds = 994.952 FPS
headtrip@DiesIrae:~$ fgl_glxgears
Using GLX_SGIX_pbuffer
2068 frames in 5.0 seconds = 413.600 FPS
2229 frames in 5.0 seconds = 445.800 FPS
2221 frames in 5.0 seconds = 444.200 FPS
2224 frames in 5.0 seconds = 444.800 FPS
2224 frames in 5.0 seconds = 444.800 FPS
2231 frames in 5.0 seconds = 446.200 FPS
2222 frames in 5.0 seconds = 444.400 FPS
2219 frames in 5.0 seconds = 443.800 FPS
:winner: :winner: :winner: :winner: :winner: :winner:
che ne dici? :p e qualcuno mi diceva che con la mia scheda sarebbe stato impossibile farglieli digerire....ci ho messo un po' ma grazie a te e a me alla fine vanno
li ho installati con l installer perche' installandoli a mano ne mancava un pezzo
il modulo caricava ma il server X non lo utilizzava dicendomi che c'era un ambiguo errore; credo che il motivo sia perche' andava ad installarmi della roba in pposizioni non standard,o perdeva qualche link simbolico
grazie dell'aiuto comunque
alla prox
zephyr83
06-12-2006, 17:38
bene sn contento per te :)
vBulletin® v3.6.4, Copyright ©2000-2025, Jelsoft Enterprises Ltd.