View Full Version : Cerco l'aiuto di un esperto di xorg
Passando da xorg 6.8 a xorg 7.0 ho avuto la sgradita sorpresa che le impostazioni che avevo con la versione 6.8 non mi funzionano più (schemo nero e sistema bloccato), con il comando dpkg-reconfigure xserver-xorg ottengo un Xorg.conf uguale a quello che funzionava bene con la 6.8.
Scheda video ATI 9250 AGP 128M
Con la versione 6.8 mi funzionavano i driver open ATI,RADEON e ATI proprietari fglrx
Da Xorg.log non vedo (EE) error, solo (WW) warning
(WW) RADEON: No matching Device section for instance (BusID PCI:1:0:1) found
(WW) RADEON(0): Failed to detect secondary monitor, MergedFB/Clone mode disabled
(WW) RADEON(0): config file hsync range 30-80kHz not within DDC hsync ranges.
(WW) RADEON(0): config file vrefresh range 56-75Hz not within DDC vrefresh ranges.
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0xefffe800 is: 0xefffe800
(WW) RADEON(0): MC_AGP_LOCATION was: 0xffffffc0 is: 0xe07fe000
Questi sono alcuni messaggi ricavati dal log del kernel
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Badness. Don't know which AGP mode to set.
agpgart: Bridge couldn't do AGP x4.
agpgart: Putting AGP V3 device at 0000:01:00.0 into 0x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 0x mode
[drm] Setting GART location based on new memory map
[drm] Loading R200 Microcode
[drm] writeback test failed
Da questo messaggio: Don't know which AGP mode to set, sembrerebbe che non sia settato l'AGP mode e non so quale è il settaggio corretto da inserire.
Qualcuno mi può aiutare?
Grazie anticipate
puoi postare il tuo xorg.conf?
Almeno ci rendiamo un po conto della situazione.
Comunque molti utenti hanno avuto difficoltà nel passaggio da 6.8 a 7.0 io compreso: a me è bastato disinstallare i driver ati e reinstallarli.
puoi postare il tuo xorg.conf?
Almeno ci rendiamo un po conto della situazione.
Comunque molti utenti hanno avuto difficoltà nel passaggio da 6.8 a 7.0 io compreso: a me è bastato disinstallare i driver ati e reinstallarli.
Questo è xorg.conf che avevo con Mepis 3.4.3 e quasi uguale con Ubuntu 64 breeze, allora avevo avuto lo problema, ma avevo risolto aggiungendo la riga Option "AGPMode" "4" ora con xorg 7.0 questa opzione non funziona più.
Provvisoriamente uso quello generato dall'installazione di Mepis 6 e usa il driver VESA.
# xorg.conf (Xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands as root:
#
# cp /etc/X11/xorg.conf /etc/X11/xorg.conf.custom
# md5sum /etc/X11/xorg.conf >/var/lib/xfree86/xorg.conf.md5sum
# dpkg-reconfigure xserver-xorg
Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection
Section "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "Device"
Identifier "ATI 9250 PRO"
# Driver "fglrx"
Driver "radeon"
BusID "PCI:1:0:0"
VideoRam 128000
Option "AGPMode" "4"
EndSection
Section "Monitor"
Identifier "JWY Model: 1733"
Option "DPMS"
HorizSync 30-80
VertRefresh 56-75
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI 9250 PRO"
Monitor "JWY Model: 1733"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "DRI"
Mode 0666
EndSection
che versione di driver ati hai installato
che versione di driver ati hai installato
Penso che intendi i driver proprietari, in ogni caso non so quali erano dato che ho disinstallato Mepis 3.4.3 erano comunque quelli presenti sul disco di Mepis (parliamo di dicembre 05 o gennaio 06) lo stesso discorso vale per i driver open.
comunque verifica che :
i driver sono gli 8.28.8 con installer
che hai installato le ultime glibc
di avere il modulo agpgart caricato
di avere un xorg.conf piu o meno simile a questo dopo l'installazione dei driver:
Section "Device"
#VideoRam 131072
# Insert Clocks lines here if appropriate
Identifier "9600pro"
Driver "radeon"
EndSection
Section "Device"
Identifier "ATI Graphics Adapter 0"
Driver "fglrx"
Option "(null)"
Option "UseInternalAGPGART" "off"
Option "ForceMonitors" "crt1,notv"
Option "DesktopSetup" "horizontal"
Option "OverlayOnCRTC2" "1"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "9600pro"
Monitor "q770"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig Screen 0"
Device "ATI Graphics Adapter 0"
Monitor "aticonfig Monitor 0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Penso che intendi i driver proprietari, in ogni caso non so quali erano dato che ho disinstallato Mepis 3.4.3 erano comunque quelli presenti sul disco di Mepis (parliamo di dicembre 05 o gennaio 06) lo stesso discorso vale per i driver open.
con xorg 7.1 quei driver non vanno più bene.
con xorg 7.1 quei driver non vanno più bene.
Ma io oggi con Mepis 6 non uso certamente più i driver che erano nella Mepis 3.4.3 ma quelli aggiornati di 6 mesi dopo.
Secondo me o è colpa di xorg o del kenel
Ma io oggi con Mepis 6 non uso certamente più i driver che erano nella Mepis 3.4.3 ma quelli aggiornati di 6 mesi dopo.
Secondo me o è colpa di xorg o del kenel
secondo me no se sei passato da xorg 6.8 a xorg 7.0 - 7.1 quei driver non vanno più bene devi scaricare quelli con l'installer dal sito ati e devi avere i requisiti che ti ho elencato sopra.
ciao quando hai finito fammi sapere.
secondo me no se sei passato da xorg 6.8 a xorg 7.0 - 7.1 quei driver non vanno più bene devi scaricare quelli con l'installer dal sito ati e devi avere i requisiti che ti ho elencato sopra.
ciao quando hai finito fammi sapere.
Se non vanno bene a me non dovrebbero andare bene a tutti quelli che hanno installato Mepis 6 con la stessa scheda video.
Comunque ho scaricato l'altro giorno la Kubuntu 64 6.10 "desktop" e la grafica non va lo stesso, dovrò provare con la versione "alternate" però devo scaricare a 56k e non è uno scherzo.
Devo verificare la presenza del modulo agpgrt
Dal log del kernel agpgart è presente:
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Badness. Don't know which AGP mode to set.
agpgart: Bridge couldn't do AGP x4.
agpgart: Putting AGP V3 device at 0000:01:00.0 into 0x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 0x mode
zephyr83
12-11-2006, 13:24
Ma io oggi con Mepis 6 non uso certamente più i driver che erano nella Mepis 3.4.3 ma quelli aggiornati di 6 mesi dopo.
Secondo me o è colpa di xorg o del kenel
ma mepis 6 l'hai installata da nuovo oppure aggiornata dalla 3.4? se provi il livecd la distro parte? Una volta c'era il comodissimo Mepis OS Center che permetteva di pristinare xorg. Sull'utlima versione nn dovrebbe esserci più ma su simplymepis 6 beta 1 si. Se il live cd parte ti consiglio di caricarlo, assiare mepisoscenter e provare a ripristinare xorg.
ma mepis 6 l'hai installata da nuovo oppure aggiornata dalla 3.4? se provi il livecd la distro parte? Una volta c'era il comodissimo Mepis OS Center che permetteva di pristinare xorg. Sull'utlima versione nn dovrebbe esserci più ma su simplymepis 6 beta 1 si. Se il live cd parte ti consiglio di caricarlo, assiare mepisoscenter e provare a ripristinare xorg.
Ho installato la mepis 6 sopra la 3.4.3 pensando che mi avrebbe salvato le impostazioni e i file della cartella home, ma forse ho sbagliato qualcosa e di fatto è a tutti gli effetti una nuova installazione. Comunque avevo fatto un backup dei file che non volevo perdere.
La mepis 6 e 3.4.3 partono bene da disco solo che la grafica è con il driver vesa e a 1024x768 e non a 1280x1024.
Ho scaricato i driver ATI 8.28.8 e più tardi intendo provare a installarli seguendo le istruzioni che sono sul sito di mepis italia, spero che poi funzioni in questo caso sarei il primo che è riuscito a far funzionare i driver fglrx ma non i driver open.
Sono riuscito a installare i driver ATI fglrx 8.28.8 però vedo che il processore va quasi al massimo.
file:///home/zorro/Desktop/schermata1.jpg
Ho provato a uccidere il processo atieventsd e tutto è tonato a posto, però gli ingranaggi sono lentissimi.
questo è xorg.conf
# Settings for wacom eraser
# Settings for wacom cursor (mouse)
Section "ServerLayout"
#Screen 0 "ATIScreen" 0 0
#InputDevice "USB Mouse" "CorePointer"
#InputDevice "Touchpad" "CorePointer"
#InputDevice "Stylus" "CorePointer"
#InputDevice "Eraser" "CorePointer"
#InputDevice "Cursor" "CorePointer"
#InputDevice "Serial Mouse" "CorePointer"
Identifier "XFree86 Configured"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
EndSection
Section "Files"
# Xorg 7.0 font paths
# Legacy font paths
# Other font paths
FontPath "/usr/share/X11/fonts/misc:unscaled"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/util"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/util"
FontPath "/usr/share/fonts/truetype/ttf-lucida"
FontPath "/usr/share/fonts/truetype/arphic"
FontPath "/usr/share/fonts/truetype/freefont"
FontPath "/usr/share/fonts/truetype/kochi"
FontPath "/usr/share/fonts/truetype/latex-xft-fonts"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/type1/gsfonts"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection
Section "Module"
Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "type1"
Load "v4l"
Load "vbe"
Load "synaptics"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"
Option "XKbOptions" ""
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "false"
Option "Emulate3Timeout" "70"
EndSection
Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.06"
Option "MaxSpeed" "0.12"
Option "AccelFactor" "0.0010"
Option "SHMConfig" "on"
Option "Repeater" "/dev/input/mice"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "false"
Option "Emulate3Timeout" "70"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "InputDevice"
Identifier "Stylus"
Driver "wacom"
Option "Mode" "Absolute"
Option "Type" "stylus"
Option "Device" "/dev/input/wacom"
EndSection
Section "InputDevice"
Identifier "Eraser"
Driver "wacom"
Option "Mode" "Absolute"
Option "Type" "eraser"
Option "Device" "/dev/input/wacom"
EndSection
Section "InputDevice"
Identifier "Cursor"
Driver "wacom"
Option "Mode" "Absolute"
Option "Type" "cursor"
Option "Device" "/dev/input/wacom"
EndSection
Section "Monitor"
#Option "DPMS" "true"
# Warning: This may fry old Monitors
# Very conservative. May flicker.
Identifier "Monitor0"
VendorName "unknown"
ModelName "unknown"
HorizSync 30.0 - 75.0
VertRefresh 50.0 - 70.0
ModeLine "640x480" 25.2 640 664 760 800 480 491 493 525
ModeLine "800x600" 40.1 800 848 968 1056 600 601 605 628
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
ModeLine "1024x768" 85.0 1024 1056 1152 1360 768 784 787 823
ModeLine "1152x864" 65.0 1152 1168 1384 1480 864 865 875 985 interlace
ModeLine "1152x864" 92.0 1152 1208 1368 1474 864 865 875 895
ModeLine "1152x864" 110.0 1152 1240 1324 1552 864 864 876 908
ModeLine "1152x864" 135.0 1152 1464 1592 1776 864 864 876 908
ModeLine "1152x864" 137.7 1152 1184 1312 1536 864 866 885 902 -hsync -vsync
ModeLine "1280x768" 80.1 1280 1344 1480 1680 768 769 772 795
ModeLine "1280x800" 80.6 1280 1344 1480 1680 800 801 804 827 -hsync -vsync
ModeLine "1280x1024" 80.0 1280 1296 1512 1568 1024 1025 1037 1165 interlace
ModeLine "1280x1024" 110.0 1280 1328 1512 1712 1024 1025 1028 1054
ModeLine "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -hsync -vsync
ModeLine "1280x1024" 135.0 1280 1312 1456 1712 1024 1027 1030 1064
ModeLine "1280x1024" 135.0 1280 1312 1416 1664 1024 1027 1030 1064
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
ModeLine "1280x1024" 181.8 1280 1312 1440 1696 1024 1031 1046 1072 -hsync -vsync
ModeLine "1440x900" 106.5 1440 1520 1672 1904 900 901 904 932 +hsync +vsync
ModeLine "1400x1050" 129.0 1400 1464 1656 1960 1050 1051 1054 1100 +hsync +vsync
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 -hsync -vsync
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 220.0 1600 1616 1808 2080 1200 1204 1207 1244 +hsync +vsync
ModeLine "1680x1050" 147.1 1680 1784 1968 2256 1050 1051 1054 1087
ModeLine "1800x1440" 230.0 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
ModeLine "1800x1440" 250.0 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
ModeLine "1920x1200" 230.0 1920 1936 2096 2528 1200 1201 1204 1250 +hsync +vsync
EndSection
Section "Monitor"
#Option "DPMS" "true"
# Warning: This may fry old Monitors
# Very conservative. May flicker.
Identifier "ATIMonitor"
VendorName "unknown"
ModelName "unknown"
HorizSync 30.0 - 75.0
VertRefresh 50.0 - 70.0
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
#BusID "PCI:1:0:0"
#Option "sw_cursor" # needed for some ati cards
#Option "hw_cursor"
#Option "NoAccel"
#Option "ShowCache"
#Option "ShadowFB"
#Option "UseFBDev"
#Option "Rotate"
#Option "NoUseBios"
#Option "BusType" "PCI"
Identifier "Card0"
Driver "vesa"
BoardName "unknown"
Option "UseInternalAGPGART" "no"
# savage special options, use with care
Option "DmaMode" "None"
# nvidia special options, use with care
Option "CursorShadow" "1"
Option "CursorShadowAlpha" "63"
Option "CursorShadowYOffset" "2"
Option "CursorShadowXOffset" "4"
Option "FlatPanelProperties" "Scaling = native"
Option "NoLogo" "false"
Option "IgnoreEdid" "true" # needs to be true for some nvidia cards
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
EndSection
Section "Screen"
# Only the official NVIDIA driver supports twinview
# these setting are an example
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 16
Option "TwinView" "false"
Option "SecondMonitorVendorName" "unknown"
Option "SecondMonitorModelName" "unknown"
Option "SecondMonitorHorizSync" "30-75"
Option "SecondMonitorVertRefresh" "50-70"
#Option "MetaModes" "1024x768, 1024x768"
Option "TwinViewOrientation" "RightOf"
Option "ConnectedMonitor" "dfp,dfp"
SubSection "Display"
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768"
EndSubSection
EndSection
Section "Screen"
Identifier "ATIScreen"
Device "Card0"
Monitor "ATIMonitor"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Non sono riuscito ad allegare l'immagine
cosa ti dice glxinfo
inoltre i dati del monitor li devi controllare sul libretto e inserire le giuste frequenze orizzontali e verticali in xorg.conf che mi sembrano non corrette
cosa ti dice glxinfo
inoltre i dati del monitor li devi controllare sul libretto e inserire le giuste frequenze orizzontali e verticali in xorg.conf che mi sembrano non corrette
Per glxinfo vedrò domani, adesso sono in windows e devo condividere la connessione, comunque pare che non funzioni l'accelerazione 3D.
Da Xorg.log vedo alcune righe con (EE)
(EE) Failed to load /usr/lib/xorg/modules/extensions/libGLcore.so
(EE) Failed to load module "GLcore" (loader failed, 7)
(EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work
e alcuni (WW)
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(WW) fglrx(0): Kernel Module version does *not* match driver.
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
(WW) fglrx(0): Option "VendorName" is not used
(WW) fglrx(0): Option "ModelName" is not used
(WW) Option "XkbOptions" requires an string value
Le frequenze del monitor devo controllarle, comunque la 1280x1024 a 75Hz mi pare che vada bene.
Risultato di glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_OML_swap_method, GLX_SGI_make_current_read,
GLX_SGIS_multisample, GLX_SGIX_hyperpipe, GLX_SGIX_swap_barrier,
GLX_SGIX_fbconfig
client glx vendor string: ATI
client glx version string: 1.3
client glx extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
GLX_ARB_get_proc_address, GLX_SGI_video_sync, GLX_ARB_multisample,
GLX_ATI_pixel_format_float, GLX_ATI_render_texture
GLX version: 1.2
GLX extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
GLX_ARB_multisample
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.4.1)
OpenGL extensions:
GL_ARB_imaging, GL_ARB_multitexture, GL_ARB_texture_border_clamp,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_dot3,
GL_ARB_transpose_matrix, GL_EXT_abgr, GL_EXT_blend_color,
GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_texture_env_add,
GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
GL_EXT_texture_lod_bias
glu version: 1.3
glu extensions:
GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
0x23 24 tc 0 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 1 0 None
0x24 24 tc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 1 0 None
0x25 24 tc 0 32 0 r y . 8 8 8 8 0 16 8 16 16 16 16 1 0 None
0x26 24 tc 0 32 0 r . . 8 8 8 8 0 16 8 16 16 16 16 1 0 None
0x27 24 dc 0 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 1 0 None
0x28 24 dc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 1 0 None
0x29 24 dc 0 32 0 r y . 8 8 8 8 0 16 8 16 16 16 16 1 0 None
0x2a 24 dc 0 32 0 r . . 8 8 8 8 0 16 8 16 16 16 16 1 0 None
zephyr83
13-11-2006, 14:23
segui questa guida per installare i driver ati!
http://wiki.ubuntu-it.org/Abilitare3DAti?action=show&redirect=Enable3DAtiRadeon%28fglrx%29
Ho risolto il problema dei driver ati e radeon, questa volta occorre inserire: Option "AGPMode" "8", senza questa oppure con Option "AGPMode" "4" o altro valore, niente (schemo nero e sistema bloccato).
Mi resta il problema del 3D sia con xorg 7.0 con Mepis che con con xorg 7.1 con Kubuntu 64; ne con i driver ati e radeon ne con i driver fglrx.
Il bello è che con le versioni precedenti di Mepis e Ubuntu, il 3D funzionava con tutti i driver.
Con xorg 7.0 trovo questo avviso in xorg.log: Found DRI library version 1.2.0 and kernel module version 1.24.0
Con xorg 7.1 questo: Found DRI library version 1.2.0 and kernel module version 1.25.0
e a quanto ho capito, facendo ricerche con google, si dovrebbe trattare di un bug di xorg, oppure (è meno probabile di un bug dei driver ati e radeon).
vBulletin® v3.6.4, Copyright ©2000-2025, Jelsoft Enterprises Ltd.