PDA

View Full Version : [roma+sped]SCHEDA MADRE+CPU+RAM+VIDEO+AUDIO+LAN


ST3P
22-09-2006, 12:36
ECCELLENTE SISTEMA A BASSI CONSUMI E GRANDE AFFIDABILITA' CON TUTTO INTEGRATO COMPOSTO DA:
1+2+3


1) SCHEDA MADRE Fujitsu Siemens Computers:

supporta pentium III e Celeron a 1000 Mhz e oltre socket 370

SCHEDA VIDEO INTEGRATA INTEL CON RISOLUZIONI FINO A 1600x1200

SCHEDA AUDIO INTEGRATA CON CONTROLLER INTEL AC'97

LAN INTEGRATA CON CONTROLLER INTEL 10/100 Mbps

USB, PCI, GAME

IDE ATA66 FINO A 4 UNITA'

CONNETTORE FLOPPY

PORTE PS2

CONNETTORI VENTOLINE CON CONTROLLO DELLA VELOCITA'

CONTROLLO TEMPERATURE

E ALTRO ANCORA VEDI SOTTO



System board in micro ATX format

PGA 370 Celeron processor with 66 MHz/100 MHz Front Side Bus for PGA 370 socket and

Pentium III with 100 / 133 MHz Front Side Bus for PGA 370 socket.

Celeron and Pentium III processors support MMX technology and Intel Streaming SIMD Extensions.



Intel chipset Consisting of GMCH 82810E, ICH 82801 and FWH82802



Intel 82559 LAN controller (10/100 Mbit/s) with RJ45 interface

WOL with Magic Packet is supported, as is booting from LAN with Bootix LAN BootP or Intel

PXE.



AC'97 Audio Codec

internal: Stereo CD-In, Stereo AUX-In

external: Mono Micro-In, Stereo Line-In, Game/Midi-Port, Stereo Line-Out (max. 2 x 0,5 W/8 )

external: Game/Midi-Port



Fujitsu Siemens system monitoring and temperature monitoring

2 DIMM slots for 16 to 512 Mbyte main memory

Flash BIOS

Energy saving functions:

APM and ACPI (requires an operating system that supports ACPI)

Switching on/off, standby mode, suspend mode via on/off switch

Switching on/off via software

Wake on RTC

Wake on LAN

Wake on PCI Cards

Security functions:

Chipcard reader interface

Detection of unauthorised opening of the casing

System, Setup and Keyboard password

parallel and serial ports can be deactivated

Floppy disk write-protection

Boot hard disk virus warning function

Flash BIOS and EEPROMs (on the memory modules) virus protection function.

PCI slot

PCI slots support 3.3 V main and auxiliary voltages.

IDE hard disk controller connected to PCI bus for up to four IDE drives

(e.g. IDE hard disk drives, ATAPI CD-ROM drives)

The IDE hard disk controller are ATA33/66, ultra DMA capable and support PIO modes 0-4.

Floppy disk drive controller (possible formats: 720 KB, 1.44 MB, 2.88 MB)

The system board supports booting from a 120 MB IDE floppy disk drive.

Features

2D/3D graphics processor, 24 bit 230 MHz RAMDAC

133 MHz display cache for increased 3D graphics performance

Monitor connector: Sub D

1 external parallel interface (ECP- and EPP-compatible)

1 external serial port (16C550 compatible with FIFO)

1 internal chipcard reader interface. This interface can also be used as a second serial port

(16C550 compatible with FIFO). This port does not support the ring indicator signal.

1 internal WOL interface

2 external PS/2 interfaces for keyboard and mouse

2 external USB ports

1 internal USB interface

Real-time clock/calendar with integrated battery backup



2) PROCESSORE INTEL PENTIUM 3 III 933 INCLUSO

Processore CPU Genuine Intel Pentium III 933 con 256 KB Cache L2 SOCKET 370



3) 128 MB MEMORIA RAM INCLUSA

Un banco da 128 MB di memoria; CONTATTATEMI PER AGGIUNGERE UN MAGGIORE QUANTITATIVO DI MEMORIA



IL TUTTO E' PERFETTAMENTE FUNZIONANTE E DA ME TESTATO PER QUALSIASI DOMANDA NON ESISTATE A CONTATTARMI ALL'INDIRIZZO



AGGIUNGO EVENTULAMENTE ALIMENTATORE ATX SILENZIOSO
AGGIUNGO EVENTUALMENTE HARD DISK A PARTIRE DA 40 GB

44euro + 10euro SPEDIZIONE eventuale

ST3P
22-09-2006, 14:02
up

ST3P
22-09-2006, 16:43
up

paco509
22-09-2006, 16:48
ciao, coda interessava a un amico chiedo.

ST3P
23-09-2006, 12:57
ok primo in coda

ST3P
24-09-2006, 14:52
up

Isomarcus
25-09-2006, 07:56
ciao, io sarei interessato alla sola mobo... non riusciresti a smembrare?

ciao

ST3P
25-09-2006, 13:41
dipende quanto mi offri!
Ciaoo

Isomarcus
25-09-2006, 15:05
uhm non saprei

intanto hai un link per la mobo? o il modello preciso?

vendi altro? perchè oltre alla mobo mi servirebbe un hd di piccolo taglio e magari un modulo da 256mb di pc100...

ST3P
25-09-2006, 20:19
TI MANDO UN PVT

ST3P
25-09-2006, 20:33
http://www.fujitsu-siemens.com/rl/peripherals/mainboards/detailed_overview_new.asp

Questo è il link ti mando in pvt il modello preciso cmq da quì come vedi scarichi tutto e controlli tutto

albanomax
28-12-2006, 22:38
avevo bisogno di un p3 1000 da sostituire a un celeron 400,c'e' ancora ??

mulo2
29-12-2006, 11:17
se ancora disponibile sarei interessato al blocco magari modificando il quantitativo di ram

aspetto news